Plate Carriers & Vests

Pack weight: 1.35 lb. Height-adjustable shoulder straps. Quick-release buckles on waist straps. Touch-fastener closer plate pockets with dense open-cell foam inserts. 600D polyester construction. Color: Black. Bulk packed. Made in China.

Dimensions: 6.5" x 2.38". Webbing gates designed to fit 1.5" (EDC) belt widths. Black Tufmax 720 construction. Fully ambidextrous. Mountable from both sides. Bulk packed. Made in USA.

Polyethylene lining. Laser-Cut-Loop system for faster fixation of equipment. Adjustable in shoulder by double hook and loop closure. Two D-rings on shoulder area. Expandable with quick release buckle. Two inside pockets. Can be equipped front and back with protection plates. MOLLE loop ribbon at front and back. Polyester construction. Color: OD Green. Bulk packed. Made in China.

Polyethylene lining. Laser-Cut-Loop system for faster fixation of equipment. Adjustable in shoulder by double hook and loop closure. Two D-rings on shoulder area. Expandable with quick release buckle. Two inside pockets. Can be equipped front and back with protection plates. MOLLE loop ribbon at front and back. Polyester construction. Color: Black. Bulk packed. Made in China.

TPR shoulder straps. MOLLE system on front, back and side straps. Three magazine pouches on front. Three elastic loops on front to fix the magazines. Small hook and loop closure pocket on front. Three hook and loop closure stripes on front and back to fix patches. Shoulder straps can be opened by hook and loop closure. Emergency drag handle. CIV-TEC WASP I Z1B camo. Polyester (600D Oxford) construction. Bulk packed. Made in China.

TPR shoulder straps. MOLLE system on front, back and side straps. Three magazine pouches on front. Three elastic loops on front to fix the magazines. Small hook and loop closure pocket on front. Three hook and loop closure stripes on front and back to fix patches. Shoulder straps can be opened by hook and loop closure. Emergency drag handle. CIV-TEC WASP I Z2 camo. Polyester (600D Oxford) construction. Bulk packed. Made in China.

TPR shoulder straps. MOLLE system on front, back and side straps. Three magazine pouches on front. Three elastic loops on front to fix the magazines. Small hook and loop closure pocket on front. Three hook and loop closure stripes on front and back to fix patches. Shoulder straps can be opened by hook and loop closure. Emergency drag handle. CIV-TEC WASP I Z3A camo. Polyester (600D Oxford) construction. Bulk packed. Made in China.

Simple chest rig with four big (AK47 magazines possible) and two small magazine pockets for pistol magazines. Adjustable shoulder straps. Several D-rings. Polyester construction. Color: Coyote Brown. Bagged. Made in China.

5.11 Tactical brings you the TacTec Plate Carrier, which were designed to be the most lightweight and best- fitting plate carriers you can find and constructed to ensure high performance while remaining lightweight and mobile.

Soft IIIA polyethylene Panel Built and tested in the USA from imported materials, NIJ tested and certified Protection against 9mm, .45, .357, and .44 mag Made in China.

The LEO H2 special threat plate provides handgun protection against multiple special threat rounds. This ultra lightweight plate also provides protection against blunt force trauma. The perfect addition to your ballistic package, can be outfitted in concealable or external carriers. Constructed of polyethylene and features a diamond rip-stop nylon cover. Made in the USA. Made in USA.

The 406-1913 Level IV hard armor rifle plate is NIJ 06 certified to the 7.62 x 63mm 166 gr AP 30-06 M2 Armor Piercing round. Constructed of a ceramic/glass composite and covered in cordura. Made in the USA. Made in USA.

The LEO H2 special threat plate provides handgun protection against multiple special threat rounds. This ultra lightweight plate also provides protection against blunt force trauma. The perfect addition to your ballistic package, can be outfitted in concealable or external carriers. Constructed of polyethylene and features a diamond rip-stop nylon cover. Made in the USA. Made in USA.

The BLACKHAWK! Omega Elite Tactical Vest #1 is a combat proven rig that is built to last. This vest features durable nylon mesh construction and is adjustable to fit nearly any size individual. The heavy-duty YKK zipper and side release buckles are perfect for rapid deployment. It includes a reinforced drag handle and BLACKHAWK!'s S.T.R.I.K.E MOLLE webbing system for additional pouches or accessories. The Omega Elite #1 features six M16/M4 magazine pouches that hold up to twelve AR15 style magazines. There are two internal zipper pockets and two exterior horizontal accessory pouches. It has padded no slip shoulders and belt loops to secure to your duty belt. Always be prepared with the BLACKHAWK! Omega Elite Tactical Vest #1! Made in Vietnam.

The highly versatile Tactical Chest Rig from Voodoo Tactical offers plenty of storage space and doubles as a lightweight plate carrier in hostile environments. The easy-access front pocket holds a 10 x 12-inch plate that is secured with a hook-and-lop closure. This plate pocket also serves as an ideal location for keeping vital documents and maps flat. Seven M14/M16 30-round magazine pockets and four covered pistol magazine pouches store and protect spare ammunition. Multiple additional pouches accommodate small equipment such as electronic devices and an individual first aid kit (IFAK). The harness features extensive front webbing, providing ample attachment points for compatible pouches and accessories. The shoulder harness incorporates a built-in webbing platform and is fully adjustable for a comfortable fit that distributes weight effectively. Made in China.

In todays day and age, a new realm of crime-fighting has arrived. Police officers are faced with criminals that are both domestic and foreign. The Valor Plate Carrier is designed for rapid deployment under five seconds aiding officers in saving lives. This plate carrier is a high speed/low drag vest with unique fast securing front clips. Designed to carry standard 10 x12 plates. Features external hook-n-loop and our new laser die-cut MOLLE system.One size fits most

The 5.11 Tactical TacTec Plate Carrier is constructed for the highest-level performance while remaining lightweight and mobile. Built out as a fully functional ballistic plate carrier or as a weighted fitness vest our patented TacTec Plate Carrier is the most comfortable you€„¢ll ever wear. Built with rugged, lightweight 500D nylon, it features padded yoke shoulder straps, perforated mesh, front and back padded panels with built-in airflow channels, and an innovative design for maximum range of motion. It holds two ballistic armor plates (medium/large), includes a low-profile Grab-Drag handle and a single-handed quick-release cable escape system. Secure, breathable, and exceptionally functional, the TacTec Plate Carrier is ready for duty or for your next WOD. Imported.

The Voodoo Tactical Instructor High Visibility Plate Carrier is designed specifically for instructors in the field. The bright red color ensures high-visibility and identification on the range. Front and rear, removable Instructor patches ensure status and identification are obvious. Front and back plate carriers allow for personal choice of hard ballistic plates. Shoulder straps and quick-release side straps adjust for a close fit to the body with minimum movement despite level of activity. Voodoo's design includes plenty of MOLLE-webbing for mounting compatible accessories, as well as a rescue drag handle to haul injured or unconscious teammates out of danger. Made in China.

Designed for use by instructors, the Instructor Armor Carrier Vest from Voodoo Tactical is bright red for maximum visibility and features removable front and rear Instructor ID patches. Built for a high level of protection, padded front and rear pockets accommodate ballistic plates. Adjustable, padded side sections accept smaller, soft plates providing protection from all angles. As an additional safety feature, the vest incorporates a sturdy drag handle, allowing teammates to easily pull wearers out of danger. An adjustable hook-and-loop elastic waistband and padded shoulder supports allow the vest to fit securely and comfortably for extended wear. Voodoo's signature cooling-mesh interior prevents sweat buildup, guaranteeing lasting comfort and dryness. An internal pocket holds a hydration bladder, or can serve as a convenient place to store documents. For additional storage, the vest's exterior is covered in universal straps, for modular pouch and accessory attachment, as well as D-rings on the shoulders for hands-free flashlight use. Made in China.

The BLACKHAWK Chest Rig is a durable, lightweight, one-size-fits-all rig that holds eight rifle magazines and two pistol magazines. The pouches include grommets for drainage and hook & loop lid closures. The BLACKHAWK Chest Rig is a perfect additional to your tactical gear arsenal. Made in Vietnam.

The Fast Plate Carrier will accommodate a pair of standard 10''W X 12''H shooter's cut hard ballistic plates or soft panels. This Fast plate carrier has a breathable mesh inner pockets on both the front and rear panels for body armor plates/panels. Made in China.

The highly versatile Tactical Chest Rig from Voodoo Tactical offers plenty of storage space and doubles as a lightweight plate carrier in hostile environments. The easy-access front pocket holds a 10 x 12-inch plate that is secured with a hook-and-lop closure. This plate pocket also serves as an ideal location for keeping vital documents and maps flat. Seven M14/M16 30-round magazine pockets and four covered pistol magazine pouches store and protect spare ammunition. Multiple additional pouches accommodate small equipment such as electronic devices and an individual first aid kit (IFAK). The harness features extensive front webbing, providing ample attachment points for compatible pouches and accessories. The shoulder harness incorporates a built-in webbing platform and is fully adjustable for a comfortable fit that distributes weight effectively. Made in China.

GH Armors trauma plates reduce blunt force trauma over the critical center chest area to help reduce injury. Made in USA.

The High Speed Gear Chest Rig features three rows and eight columns of PALS and a side opening for maps or paperwork. An High Speed Gear H Harness is including to provide better support over an X Back found on most chest rigs. A Velcro hook panel is installed on the back to make integration with plate carrier systems and a sewn in carry handle allows you to grab and go if you need to be moving right now. Add 3TACO Magazine Pouches and a Bleeder/Blowout Pouch and you have a setup that should match any need. Made in USA.

The High Speed Gear Chest Rig features three rows and eight columns of PALS and a side opening for maps or paperwork. An High Speed Gear H Harness is including to provide better support over an X Back found on most chest rigs. A Velcro hook panel is installed on the back to make integration with plate carrier systems and a sewn in carry handle allows you to grab and go if you need to be moving right now. Add 3TACO Magazine Pouches and a Bleeder/Blowout Pouch and you have a setup that should match any need. Made in USA.

The next evolution in load-bearing solutions for uniformed patrol officers. The Hexgrid Uniform Outer carrier provides a versatile, customizable platform for attaching MOLLE or web pouches, and supports a wide range of third party soft body armor panels. Made in Bangladesh.

Dimensions: 5.75" x 4.13". 5" x 3" platform. Fits onto plate carriers, tactical vests, battle belts, or bags equipped with PALS/MOLLE webbing straps. Can be oriented vertically or horizontally. Over 200 mounting holes. Compatible with Chicago Posts and screws or Shock-Cord. Black Tufmax 720 construction. Bulk packed. Made in USA.

Carrier will accept front and rear plates 10W x 12H x 1/2D. When cummerbund is worn without side plates, the empty pockets can carry your maps or other gear. Carrier and cummerbund have MOLLE webbing for attaching your pouches. hook-n-loop panel on the front and rear for service patches or name plates. Also includes a mesh lining for breath-ability and a rear drag handle. Made in China.

Designed to accommodate both 10x12 plates and/or soft body armor, the Voodoo Tactical Heavy Armor Carrier provides comfort, adjustability, durability, and plenty of MOLLE compatible webbing. Made in China.

provides extensive protection for the part of the body containing the most vital organs. It saves life at a critical moment. Made with PE fabrics. Tested under the NIJ 0101.06 level IIIA standard. Capable of stopping .44 Magnum bullet and .357 bullet with maximum back face deformation of 44mm. Extensive side protection as well as front and back protection. Adjustable closure to fit a wide range of body sizes. Light-weight ergonomic design reduces body load and fits closely while allowing unrestricted physical activities. Easy maintenance with the detachable bulletproof panel Great weather ability. Knife and Stab resistant. Made in China.

This is a common piece of tactical gear designed to hold ballistic plates for military or law enforcement personnel. It includes padded pouches specifically designed to hold plates up to 10 x 13 inches, and the plates are easy to insert thanks to ample use of Velcro fasteners. Of course this carrier does not offer any ballistic protection you must include your own plates and or body armor inserts. Made in China.

Carrier will accept front and rear plates 10W x 12H x 1/2D. When cummerbund is worn without side plates, the empty pockets can carry your maps or other gear. Carrier and cummerbund have MOLLE webbing for attaching your pouches. hook-n-loop panel on the front and rear for service patches or name plates. Also includes a mesh lining for breath-ability and a rear drag handle. Made in China.

Dimensions: 6.5" x 2.25". Webbing gates designed to fit 1.75" (EDC) belt widths. Black Tufmax 720 construction. Fully ambidextrous. Mountable from both sides. Bulk packed. Made in USA.

5.11 Tactical brings you the TacTec Plate Carrier, which were designed to be the most lightweight and best- fitting plate carriers you can find and constructed to ensure high performance while remaining lightweight and mobile.

Ease the load of your duty belt to help prevent back and hip injury with the Ergonomic Duty Belt Harness. Let us shoulder some of the burden with this proven harness system. Broad fit range. No moving parts to fail. NIJ selected and funded to address back and hip pain. Helps alleviate discomfort caused by heavy duty belts. Eliminates issues associated with external suspender systems. Can be worn under duty shirt with slight modifications. Compatible with most concealment armor packages. Accommodates duty belts up to 2.25" wide (sold separately) Made in USA.