Holster Accessories

3". Hardware included. Bulk packed. Made in China.

5". Hardware included. Bulk packed. Made in China.

3". Hardware included. Bulk packed. Made in China.

5". Hardware included. Bulk packed. Made in China.

6mm. Hardware included. Bulk packed. Made in China.

12mm. Hardware included. Made in China.

Dimensions: 3.5" x 2". Includes hardware. Polymer construction. Color: OD Green. Bulk packed. Made in China.

Dimensions: 3.5" x 2". Includes hardware. Polymer construction. Color: Tan. Bulk packed. Made in China.

Black Comfortuf 420 construction. Molded in pinch-point allows loop to lay flat in locked position. In-grip nodules provide friction with entire width of the belt. Compatible with 1.5" and 1.75" belt widths. Key-Hole Interference Lock compatible with standard Chicago posts and screw hardware. Comes with (2) loops; (4) 3/16" posts; (2) 1/2" Truss Head screw. Bulk packed. Made in USA.

Black Comfortuf 420 construction. Molded in pinch-point allows loop to lay flat in locked position. In-grip nodules provide friction with entire width of the belt. Compatible with 1.5" and 1.75" belt widths. Key-Hole Interference Lock compatible with standard Chicago posts and screw hardware. Comes with (2) loops; (4) 3/16" posts; (2) 5/8" Truss Head screw. Bulk packed. Made in USA.

Hardware included. Bulk packed. Made in China.

1". Hardware included. Bulk packed. Made in China.

4mm 1.5". Hardware included. Bulk packed. Made in China.

6mm 1.5". Hardware included. Bulk packed. Made in China.

The T-Series Jacket Slot Belt Loop is designed to fit any Blackhawk injection molded holster.

If you need quick-release capability for your drop leg thigh rigs, this is the heat! Works w/ all BHI drop leg and holster systems.

Accessory insert for UBL (Universal Belt Loop) to be used on 2 (50mm) belts.

The T-Series Quick Detach, also known as QD2, lets you to quickly rearrange your gear without any tools. Constructed of injection molded polymers, this duty-rated interface can be mounted to any T-Series attachment platform. Lock your holster in with a positive click and remove by pinching dual locking levers for extra security. Kit includes one male adapter, one female adapter, and mounting hardware.

Leg strap replacement for standard tactical holster rigs. This strap runs through the leg shroud and secures the leg shroud to your thigh. This is for a single strap only. Available in Black and FDE.

The Blackhawk T-Series MOLLE Adapter offers an adjustable carry solution for MOLLE based applications.

The QUICK-Kit4 includes one QLS 19 Locking Fork and two QLS 22L Receiver Plates. Constructed of injection molded nylon, the receiver plate can be attached at different angles according to user preference. The QLS (Quick Locking System) allows for quick transfer of gear between attachment points such as a belt loop, tactical leg shroud or other stable platform. The QLS fork and plate combination passes the Level I Retention pull test.

Designed to fit any BLACKHAWK! injection-molded concealment holster, this Belt Loop Platform comes with mounting screws.

Blade-Tech large Tek-Lok with mounting hardware for attachment to an Eleven 10 RIGID TQ Case. Comes with the TekLok and 3 barrel nuts, screws and bushings. Made in USA.

The Mid-Ride Duty Belt Loop from Blackhawk is an economic solution to uncomfortable and ineffective sidearm carry. Finding a holster that offers a secure gun hold, a smooth draw, an appropriate cant and that rides at the perfect level is next to impossible. Sometimes a holster feels great in the store, but after several test runs in the field, does not quite draw as comfortably as intended. Blackhawk's tactical belt loop allows users to adjust the location at which their handgun rests for a more comfortable carry without having to replace an otherwise perfectly useful and broken-in holster.

Draw-EZ is applied to the inside of your leather holster to shorten the break-in period and to provide a slicker draw. When applied sparingly to the interior surface of the leather pocket Draw-EZ will not be absorbed by the leather, alter the fit of the holster, or harm the finish on either the firearm or the holster. Galco's Leather Lotion and Conditioner is specially formulated to gently clean, condition and preserve finished naked and exotic leathers. The special wax free formula removes surface dirt and provides water resistance. Do not use on suede, nubuck or napped leathers. (Holster not included)

The Level II Holster Belt Clip Adapter is an add-on that can be used to convert the Byrna Level II holster from the standard paddle grip to secure, belt attached holster.

The Eleven 10 RIGID TQ Case Shirt Shield for C-A-T is an optional accessory that when installed, creates a barrier between your body, shirt, and the exposed portion of your tourniquet. A great way to prevent premature wear on duty uniforms, preventing any rub marks or fraying that may occur with duty gear worn snug to the body. Installs quickly and comes with necessary hardware. Made in USA.

Replacement mounting hardware for attachment of a Blade-Tech Tek-Lok to an Eleven 10 RIGID TQ Case. Comes with the 3 barrel nuts, O-rings, and screws. Made in USA.

Pack of 4 solid-brass screw sets for shoulder system assembly. Works with Galco shoulder systems and the KingTuk IWB series.

The Micro Leg Platform is a low-profile platform with a single leg strap that is lightweight and has a compact footprint. The platform has an adjustable vertical strap that allows users to optimize ride height while providing the user with the ability to carry firearm while carrying load-bearing ruck.

Leg strap replacement for standard tactical holster rigs. This strap runs through the leg shroud and secures the leg shroud to your thigh.  This is for a single strap only.  Available in Black and FDE.

Tactical Tailor Short Malice Clip that includes hardware for mounting to an Eleven 10 RIGID TQ Case. Includes the Malice Clip, 2 barrel nuts, and screws. Made in USA.

*Does not work with Cop Ankle Band or Ankle Safe

The P-2200 is an accessory designed to work with SAFARILAND's duty holsters with 2.25 (58mm) belt loops. It's an injection molded insert that allows these holsters to be used with standard 2 (50mm) nylon belts, such as SAFARILAND's Nylok belt series.

The T-Series Quick Dual Relase Belt Loop is designed to fit any Blackhawk injection molded holster.

The Model 565BL Hi-Ride Belt Loop rides 1 higher than standard belt loops. Designed for use on any Safariland 3-hole patterned holster, it is available in black, in 1.5 (38mm) or 1.75 (45mm) belt widths.

The 744BL Clip-On Belt Loop that can be used on all Safariland tactical accessories and is also  replacement item for the Model 774 Single Magazine Pouch for long guns. This polymer clip design attaches via two Allen screws allowing the product to be worn on belts up to 2.25 inch (58 mm) wide. It can also be used with the Universal Flex Adapter (UFA) to allow for quick and easy attachment and detachment from the belt. Black finish.

Mounting hardware for attachment of an Eleven 10 RIGID TQ Case to a Safariland Drop Leg Shroud in the accessory position. Comes with the 2 barrel nuts, bushings, screws and washers.

This Safariland Chest Rig (SCR) is an add-on part for Safariland holsters. The SCR replaces the standard belt attachments for 6TS and 7TS holsters and places the holster system on the chest for adaptive accessibility. The SCR allows for three-hole pattern holsters and accessories (like the Safariland Quick Locking System) to be canted for the optimal accessibility of the firearm. The SCR is supported by three 1.5" nylon straps and connects with a quick attachment buckle for easy one-handed securement. NOTE: Only available in Right Hand Configuration

A pair of metal clips compatible with the KingTuk and V-Hawk IWB holsters. Includes four screw/post sets. Fit belts up to 1 3/4.

Tactical Tailor Short Malice Clip that includes hardware for mounting to an Eleven 10 RIGID TQ Case. Includes the Malice Clip, 2 barrel nuts, and screws. Made in USA.

2". Hardware included. Bulk packed. Made in China.

The International Mount Kit is designed to be used with the International Holster, International with Light Holster, International Duty Holster or International Duty with Light Holster.

Set of tie-downs for the Classic Lite and Classic Lite 2.0 shoulder systems. Includes both holster and ammo-side tie-downs. This modernized second-generation design generally fits users between 5' and 6'10" tall, whether long or short-waisted. The height at which the belt/pants are worn, and the height at which the system components are worn, may significantly affect the fit of the tie downs. Galco recommends wearing the components relatively high. Those in the upper end of the height range may need to lower the components in order to secure the tie downs to the belt. Available in natural color.

This comprehensive repair kit includes a variety of essential hardware needed to service Safariland holsters. It consists of 75 Allen screws in 8 sizes, 10 small rollers, 10 large rollers, 40 washers in 4 styles, 5 T-nuts and 5 metal paddle hooks. It also includes 3 bushings for SLS holsters. Ideal for rangemasters and armorers at law enforcement agencies. These components come organized in a compartmentalized plastic tool box. An Allen wrench is included.

For use with Safariland 3-hole patterned holsters. Positions upper portion of holster farther away from body without spacing the bottom any further, giving an increased outward cant. Designed to customize holster placement to accommodate various shapes. The kit includes 2 oval spacers and various hardware components. An Allen wrench is included.

The QUICK-Kit2 includes one each of the QLS 19 Locking Fork and QLS 22L Receiver Plate components. Constructed of injection molded nylon, the receiver plate can be attached at different angles according to user preference. The QLS (Quick Locking System) allows for quick transfer of gear between attachment points such as a belt loop, tactical leg shroud or other stable platform. The QLS fork and plate combination passes the Level I Retention pull test.

The Rapid Force Tactical Adapter gives you the freedom to mount your Rapid Force holster shell onto your existing non-Rapid Force quick attachment system.

The Cantable Belt Loop (CUBL) allows the user to choose the cant position on their holster based on their preference. Extremely adaptable, the CUBL integrates with Safariland UBL products and 3-hole patterned holsters.

Designed to fit any BLACKHAWK! injection-molded concealment holster, this Paddle Loop Platform comes with mounting screws.

This package from Blackhawk contains two holster spacer kits, designed to be used with the company's range of carbon fiber composite holsters. The three-point spacer design and 8-32 screws are compatible with concealment holsters. The spacer increases the distance between the holster and your body, making it easier to access while wearing heavy body armor or other protective equipment or compensate for waist to hip contours. Its adjustable screws allow you to set the spacing for the easiest, most comfortable draw. It also makes it easy to adjust the angle of the holster for easier access.

This package from Blackhawk contains two holster spacer kits, designed to be used with the company's range of carbon fiber composite holsters. The three-point spacer design and 8-32 screws are compatible with concealment holsters. The spacer increases the distance between the holster and your body, making it easier to access while wearing heavy body armor or other protective equipment or compensate for waist to hip contours. Its adjustable screws allow you to set the spacing for the easiest, most comfortable draw. It also makes it easy to adjust the angle of the holster for easier access.

The SERPA High Ride Duty Belt Loop Attachment is a convenient accessory from Blackhawk! designed for compatibility with their popular line of SERPA duty holsters. The molded slots allow for a higher ride position of holsters along duty belts. The raised height offers numerous tactical advantages, including improved concealment of handguns beneath a shirt or jacket and greater wearer comfort when worn in a seated position--ideal for officers spending long periods of time inside a vehicle. The twin belt slots provide plenty of stability and securely fastens to a 2-inch or 2.25-inch duty belt.

The Jacket Slot Duty Belt Loop from Blackhawk is a quick, convenient and cost-effective solution when exchanging sidearms on a fully-loaded duty belt. Tactical rigs and duty belts are essential for carrying the tools necessary for successful law enforcement work. The carrier threads through each radio, flashlight, handcuff, baton, holster and other essential duty gear items, making removal and exchange of items time consuming and a pain. The Jacket Slot Belt Loop features a folding attachment style, allowing for securement to any belt or rig without having to unthread other gear. The loop simply wraps around the belt and is fastened together by a set of screws. The belt loop can be fixed to any three-hole holster, to allow for quick and efficient holster removal and attachment.