Shop by Knife Designer

4 7/8" closed framelock. 3 1/2" stonewash finish S35VN stainless clip point blade with extended tang. 6AL4V titanium handles with skull artwork. Ball bearing system for smooth opening. Titanium pocket clip. Comes with cleaning cloth. Designed by Matt Cucchiaria Custom Knives. Made in China.

Anglesey "Lite Gear" products were created by law enforcement, military, and outdoorsmen who saw a need for working gear that weighed less but stood up to the rigors of extreme operational use and nature's demands. Blade Steel: 440C. Blade Hardness: 57-58. Blade Style: Full tang double hollow ground. Blade Surface: Bead Blasted. Grips: Black G-10 with Grenade Pattern. Quillions: Wide to guard hand. Blade Length: 7 inches, Tang Length: 5.5 inches. Weight: 12 oz. Sheath: Black Kydex, Molle lok compatible. Designed by A. B. Lovell Made in the USA.

4 7/8" closed. 3 3/8" 440C stainless blade with dual thumb studs. Grooved G-10 handles with Rear-Ergo Grip and Index Divot to safely pivot the knife while transitioning through different holds and applications and to properly index those grips for optimum operations. When blade is closed, knife can be used as an Impact Weapon with serrated surface on end. Can also be used as a Compliance Tool. Lanyard hole. Reversible black stainless pocket clip. Designed by Brian Hoffner, renowned Defensive Knife Trainer. 3 3/8" matte finish partially serrated blade. Black handles. Made in China.

4 7/8" closed. 3 3/8" 440C stainless blade with dual thumb studs. Grooved G-10 handles with Rear-Ergo Grip and Index Divot to safely pivot the knife while transitioning through different holds and applications and to properly index those grips for optimum operations. When blade is closed, knife can be used as an Impact Weapon with serrated surface on end. Can also be used as a Compliance Tool. Lanyard hole. Reversible black stainless pocket clip. Designed by Brian Hoffner, renowned Defensive Knife Trainer. 3 3/8" matte finish standard edge blade. Black handles. Made in China.

4 7/8" closed. 3 3/8" 440C stainless blade with dual thumb studs. Grooved G-10 handles with Rear-Ergo Grip and Index Divot to safely pivot the knife while transitioning through different holds and applications and to properly index those grips for optimum operations. When blade is closed, knife can be used as an Impact Weapon with serrated surface on end. Can also be used as a Compliance Tool. Lanyard hole. Reversible black stainless pocket clip. Designed by Brian Hoffner, renowned Defensive Knife Trainer. 2 7/8" red finish blunt tip training blade. Red handles. Made in China.

4 7/8" closed linerlock. 3 1/2" black finish 440 stainless partially serrated blade with dual thumb studs. Grooved olive G-10 handles with Rear-Ergo Grip and Index Divots to safely pivot the knife while transitioning through different holds and applications and to properly index those grips for optimum operations. When blade is closed, knife can be used as an Impact Weapon with serrated surface on end. Can also be used as a Compliance Tool. Lanyard hole. Reversible black finish stainless pocket clip. Designed by Brian Hoffner, renowned Defensive Knife Trainer. Made in China.

11 7/8" overall. 7" black stonewash finish 440C stainless drop point tanto blade. Full tang. Khaki ergonomic G-10 "Grippy" handles with Index Divots. Includes khaki Click-Lok Kydex sheath with ambidextrous belt mount. Designed by Brian Hoffner, renowned Defensive Knife Trainer. Made in China.

11 7/8" overall. 7" black stonewash finish 440C stainless drop point tanto blade. Full tang. Olive ergonomic G-10 "Grippy" handles with Index Divots. Includes olive green Click-Lok Kydex sheath with ambidextrous belt mount. Designed by Brian Hoffner, renowned Defensive Knife Trainer. Made in China.

4" closed. 2 7/8" Damascus steel blade with dual thumb studs. Black G-10 handles with Rear-Ergo Grip and Index Divots to safely pivot the knife while transitioning through different holds and applications and to properly index those grips for optimum operations. When blade is closed, knife can be used as an Impact Weapon with serrated surface on end. Can also be used as a Compliance Tool. Lanyard hole. Reversible black finish stainless pocket clip. Designed by Brian Hoffner. Made in China.

8 7/8" overall. 4" blade. Rough black micarta grips. Lanyard loop. Entire knife has blued finish. Handmade leather sheath. Designed by C. T. Boddington. Handmade in the USA.

Wilderness Explorer. 10.75" overall. 5.75" satin finish CPM Cru-Wear steel drop point blade. Green canvas micarta handle. Stainless guard. Full tang. Lanyard hole. Designed by Bob Loveless. Brown leather belt sheath. Boxed.

Please note: Blade steel may change without notice, depending on availability of materials at time of manufacture. Made in the USA.

Los Lobos. 12" overall. 6.25" satin finish A2 tool steel blade. Antique ivory micarta handle. Lanyard hole. Full tang. Black leather belt sheath. Designed by Shane Wink. Boxed. Made in the USA.

Los Lobos. 12" overall. 6.25" satin finish A2 tool steel blade. Black canvas micarta handle. Full tang. Lanyard hole. Brown leather belt sheath. Designed by Shane Wink. Boxed. Made in the USA.

Los Lobos. 12" overall. 6.25" satin finish A2 tool steel blade. Green canvas micarta handle. Lanyard hole. Full tang. Brown leather belt sheath. Designed by Shane Wink. Boxed. Made in the USA.

Los Lobos. 12" overall. 6.25" satin finish A2 tool steel blade. Brown canvas micarta handle. Lanyard hole. Full tang. Brown leather belt sheath. Designed by Shane Wink. Boxed. Made in the USA.

15.13" overall. 9" satin finish CPM-3V carbon steel blade. Black canvas micarta handle. Full tang. Lanyard hole. Chris Tanner design. Brown leather belt sheath. Boxed. Made in the USA.

11.45" overall. 6.5" satin finish CPM-154 stainless blade. Black linen micarta handle. Brass guard and pommel. Saber grip. Designed by Jim Stewart. Brown leather belt sheath. Boxed.

Please note: Blade steel may change without notice, depending on availability of materials at time of manufacture. Made in the USA.

11.45" overall. 6.5" satin finish CPM-154 stainless blade. Green canvas micarta handle. Brass guard and pommel. Saber grip. Designed by Jim Stewart. Brown leather belt sheath. Boxed.

Please note: Blade steel may change without notice, depending on availability of materials at time of manufacture. Made in the USA.

11.45" overall. 6.5" satin finish CPM-154 stainless blade. Natural canvas micarta handle. Brass guard and pommel. Saber grip. Designed by Jim Stewart. Brown leather belt sheath. Boxed.

Please note: Blade steel may change without notice, depending on availability of materials at time of manufacture. Made in the USA.

5" closed linerlock. 3" 8Cr14MoV satin finish partially serrated modified sheepsfoot blade with dual thumb studs. Contoured red and black G-10 handles. Satin finish stainless pocket clip. Factory production of knife maker Sean Kendrick's custom design. Made in China.

8 1/4" overall. 3 3/4" stainless guthook blade. Checkered black Zytel handle with integrated finger guard. Lanyard hole. Black nylon belt sheath. Designed by R.W. Loveless. Made in Japan.

8 1/4" overall. 3 3/4" stainless blade. Checkered black Zytel handles with integrated finger guard. Lanyard hole. Black nylon belt sheath. Designed by R.W. Loveless. Made in Japan.

8 1/4" overall. 3 3/4" stainless skinner blade. Checkered black Zytel handles with integrated finger guard. Lanyard hole. Black nylon belt sheath. Designed by R.W. Loveless. Made in Japan.

9 3/4" overall. 4 3/4" gray finish 440C stainless blade. Full tang. Textured black G-10 handles. Black cord lanyard. Deluxe molded black Kydex sheath with Tec-Lok, firestarter, and striker with ruler. Sami Stinner design. Made in China.

Edited by Joe Kertzman. 312 page paperback. Includes: Directory of Custom Knifemakers, useful information on the latest trends in designs and materials, many useful and informative articles, and numerous color photos. 312 page paperback. Made in the USA.

7.5" overall. 3.63" satin finish T6MoV stainless blade. Guayacan Ebony wood handle. Full tang. Lanyard hole. Brown leather belt sheath. Designed by Jerry Lairson. Boxed. Made in Argentina.

7.5" overall. 3.63" satin finish T6MoV stainless blade. Stag handle. Full tang. Lanyard hole. Brown leather belt sheath. Designed by Jerry Lairson. Boxed. Made in Argentina.

8.5" overall. 3.5" satin finish 14C28N Sandvik stainless blade. Black G10 handle. Full tang. Lucas Burnley design. Black Kydex belt sheath. Boxed. Made in Germany.

4" closed. 2.88" satin finish Bohler N690 stainless blade. Stainless handle with Rosewood insert. Features the interlock system, which provides a simple and effective means of disengaging the blade. Serialized. Certificate of Authenticity. Red nylon pouch. Designed by Wilfried Gorski. Gift boxed. Made in Germany.

5" closed. 3.5" Damascus steel drop point blade. Grenadill wood handle. Stainless bolster(s). Limited to 199 units world wide. Designed by Chad Nichols. Gift boxed. Made in Germany.

3.88" closed. 2.75" Bohler N690 stainless blade. Gray smooth titanium handle with carbon fiber inlay. Includes drawstring storage sleeve. Designed by Wilfried Gorski. Boxed. Made in Germany.

4" closed. 3" satin finish CPM-154 stainless drop point blade. Stonewash finish titanium handle. Extended tang. Lanyard hole. Pocket clip. Designed by Lucas Burnley. Boxed. Made in Germany.

Fellow Classic Lockback. 4.25" closed. 3.3" Damascus steel blade. Black oak handle. Nickel silver bolster(s). Includes storage bag. Limited edition of 500 pieces. Designed by Chad Nichols. Boxed. Made in Germany.

4.1" closed. 3.3" Damascus steel blade. Black textured oak handle. nickel silver bolster(s). Includes storage bag. Designed by Chad Nichols. Boxed. Made in Germany.

4" closed. 3" two-tone finish CPM-154 stainless drop point blade. Damascus steel handle. Extended tang. Designed by Les Voorhies. Limited to 199 pieces worldwide. Gift boxed. Made in Germany.

4.5" closed. 3.25" Damascus steel blade. Ironwood handle. Nickel silver bolster(s). Inlay shield. Serialized limited run of 999 pieces. Comes in frame display case. Designed by Chad Nichols. Boxed. Made in Germany.

7 1/2" overall. 3 1/8" D2 tool steel blade. Full tang. Green canvas micarta scales. Lanyard. Black leather belt sheath. Serialized. Designed by Thomas Künzi. Made in Germany.

9 1/8" overall. 4 5/8" N690BO stainless blade. Full tang. Grooved canvas micarta handles with stainless finger guard. Lanyard hole. Black leather belt sheath. Designed by Armin Stutz from the Austrian Knife Forge "Steirer Eisen". Made in Germany.

8.5" overall. 3.88" satin finish Bohler N690 stainless drop point blade. Black canvas micarta handle. Full tang. Lanyard hole. Brown leather belt sheath. Designed by Lucas Burnley. Boxed. Made in Germany.

Cinch. 6.5" overall. 2.88" satin finish 440C stainless blade. Stag handle. Full tang. Blade etching. Designed by Don Hethcoat. Sheath contains sewn-in magnet. Brown leather belt sheath. Boxed. Made in China.

2.75" closed. 1.75" bead blast finish AUS-8 stainless blade. Thumb stud. Lanyard hole. Pocket clip. Black FRN front handle with brushed stainless back handle. Designed by Chad Los Banos. Boxed. Made in Taiwan.

12" overall. 7" satin finish 440C stainless blade. Black micarta handle. Stainless guard and pommel. Designed by John H. Davis. Limited to 1999 pieces worldwide. Certificate of Authenticity. Black leather belt sheath. Gift boxed. Made in China.

4.2" closed. 3" satin finish VG-10 stainless blade. Black smooth carbon fiber handle. Lanyard hole. Pocket clip. Features IKBS (internal knife ball bearing). Designed by Lucas Burnley. Boxed. Made in China.

4.88" closed. 3.5" stonewash finish 440C stainless drop point blade. Sculpted titanium handle. Extended tang. Thumb stud. Pocket clip. Designed by Mikkel Willumsen. Boxed. Made in China.

4" closed. 3" satin finish VG-10 stainless tanto blade. Tumbled finish titanium handle. Extended tang. Pocket clip. Designed by Brad Zinker. Boxed. Made in China.

4.5" closed. 3.75" satin finish VG-10 stainless drop point blade. Cocobolo wood handle. Extended tang. Pocket clip. Designed by Brad Zinker. Boxed. Made in China.

3.5" closed. 3" satin finish VG-10 stainless drop point blade. Tumbled finish titanium handle. Extended tang. Pocket clip. Designed by Brad Zinker. Boxed. Made in China.

4.5" closed. 3.25" satin finish VG-10 stainless blade. Matte and satin finish titanium handle. Thumb stud. Pocket clip. Lanyard hole. Designed by Steve Kelly. Boxed. Made in China.

4.63" closed. 3.38" stonewash finish D2 tool steel tanto blade. Stonewash finish stainless handle. Extended tang. Thumb stud. Pocket clip. Lanyard hole. Japanese sun artwork on handle. Designed by Lucas Burnley. Boxed. Made in China.

4.25" closed. 3.75" black stonewash finish D2 tool steel drop point blade. Black stonewash finish stainless handle. Extended tang. Pocket clip. Lanyard hole. Designed by Jason B. Stout. Boxed. Made in China.

6.75" overall. 3" satin finish AUS-8 stainless drop point blade. Green G10 handle. Full tang. Lanyard hole. Designed for Mickey Yurco. Black leather belt sheath. Boxed. Made in China.

7.88" overall. 3.25" satin finish 14C28N Sandvik stainless blade. Black sculpted G10 handle. Full, extended tang. Finger ring. Designed by John Gray. Comes with ball chain lanyard and belt adapter. Black Kydex neck sheath. Boxed. Made in China.

9.63" overall. 4.75" black stonewash finish 14C28N Sandvik stainless drop point blade. Black G10 handle. Full, extended tang. Lanyard hole. Designed by Sandor Hegyes. Black Kydex belt sheath. Boxed. Made in China.

12 1/2" overall. 7 1/4" black acid wash finish 440C stainless clip point blade. Fileworked spine. Full tang. Ranger green G-10 handles. Lanyard hole. Black leather belt sheath. Designed by Norbert Müller. Made in Taiwan.

4.38" overall. Machined brass construction. Compatible with Fisher Space Pen cartridge #PR4. Designed by Thomas Braunagel. Boxed. Made in China.

5" overall. Designed by Rainer Wenning and knifemaker Thomas Braunagel. Bolt action mechanism with click open and close. The Clip Integrated Design (CID) offers easy placement in the pocket and has minimal give. CNC milled brass construction. Compatible with LAMY #M22 ink refills. Boxed. Made in China.

5.13" overall. Pocket clip. Bayonet mechanism with lateral slider. Compatible with Fisher Space pen PR4 refill and Parker style refill. Designed by Darriel Caston. Aluminum construction. Color: Black. Boxed. Made in China.

4.5" closed. 3.5" satin finish Elmax steel drop point blade. Black G10 handle. Thumb stud. Pocket clip. Designed by Jukka Hankala. Boxed. Made in Finland.

4" closed. 3.14" black DLC coated S35VN steel drop point blade. Thumb stud. Pocket clip. Marbled carbon fiber handle with Damasteel DS93X bolster. Black Paperstone display box. Designed by Mark Mclean. Certificate of Authenticity. Serialized limited edition of 150. Boxed. Made in the USA.

Overall: 6.75"; Blade: 2.25" l Tool Steel l Standard Edge; Other Info: One piece D-2 tool steel construction. Finger ring with glass breaker. Black Kydex sheath with belt clip. Co-designed by Rob Walker and Colin Despins of Max Venom. Boxed. Made in the USA.

5 3/4" overall. 2 1/4" modified tanto blade. One piece bead blast finish 8Cr13MoV stainless construction with machined hole cutout designed handles. Black molded glass-reinforced nylon neck sheath with J-hook. Black quick release cord lanyard. Versatile carry options. Designed by Pat and Wes Crawford. Made in China.

7 1/2" overall. 2 7/8" black powder coated 8Cr13MoV stainless modified drop point blade. Full tang. OD green cord wrapped handle with braided lanyard. Black molded glass-reinforced nylon MOLLE compatible neck sheath. Includes gear compatible J-hook clip and black quick release cord lanyard which may be attached to sheath for a variety of carry options. Designed by Pat and Wes Crawford. Made in China.

2.48" overall. One piece 8Cr13MoV stainless construction. Hardened to 58-59 HRC. Features integrated seat belt cutter, oxygen tank opener, 1/4" wrench, bottle opener, flathead screwdriver, lanyard hole and keyring. Black form fit, vinyl slip-sheath. Designed by Ray Kirk. Made in China.

7 5/8" overall. 3 3/8" gray TiNitride finish 8Cr14MoV stainless clip point blade with etched pattern. Hardened to 56-58 HRC. Full tang. Black faux ray skin handle with black paracord wrap. Black molded glass filled nylon sheath with black cord lanyard and silver skull bead. Includes a sturdy belt carry system and hardware that attaches to the grommets on the sheath. Designed by Lucas Burnley. Made in China.

6 1/4" overall. 3" 5Cr15MoV stainless wharncliffe blade with bead blast finish. Full tang. Textured black and brown G-10 handles with braided lanyard. Molded black neck sheath with black cord neck lanyard. Packaged with clip which may be attached to sheath for pocket carry. Designed by Alan Folts. Made in China.

4 3/4" overall. 2" bead blast finish 5Cr15MoV stainless needle sharp hawkbill blade with thumb ridge and lashing hole. Full tang. Hardened to 55-57 HRC. Fingergrooved black and green polished resin infused fiber handles. Black braided lanyard. Black molded glass filled nylon neck sheath with black nylon cord lanyard. Includes belt clip. Designed by Alan Folts. Made in China.

4 1/2" closed. 3 1/8" two tone mirror polished and brushed finish 8Cr13MoV stainless modified tanto blade with flipper. Hardened to 57-59 HRC. IKBS ball bearing pivot system. Unique angular Ti-Nitride finish 2Cr13 stainless handles with blue accents. Lanyard hole. Reversible stainless pocket clip. Designed by Terry Renner. Made in China.

2 1/2" closed. 1 1/2" stonewashed finish serrated 5Cr13MoV stainless tanto blade with thumb stud. Stonewashed finish 6AL4V titanium handle with 1/2" carabiner loop. Lanyard hole. Designed by Hans Florine. Made in China.

Closed: 4.875"; Blade: 3.75" | 8Cr13MoV Stainless | Standard Edge | Satin Finish; Other Info: Lanyard Hole | Thumb Slot | Thumb Ridge | Pocket Clip. Kukri style blade. 2Cr13 stainless handles. Designed by Lucas Burnley. Boxed. Made in China.

6 1/4" overall. 2 7/8" Ti-Nitride gray finish 8Cr13MoV stainless drop point slight recurve blade with acid etch pattern. Neon green faux ray skin handle with black cord wrap. Black molded glass-reinforced nylon neck sheath with black nylon lanyard and skull bead accent. Includes gear compatible J-hook clip for a variety of carry options. Designed by Lucas Burnley. Made in China.

6 1/4" overall. 2 3/8" gray titanium nitride finish 8Cr13MoV stainless upswept drop point blade with acid etch pattern. Neon green faux ray skin handle with black cord wrap. Black molded glass-reinforced nylon neck sheath with J-hook and lashing holes. Black nylon lanyard with skull bead accent. Designed by Lucas Burnley. Made in China.

2 1/8" closed. 2" stonewash finish 8Cr13MoV stainless hollow ground drop point blade with dual thumb studs. Stonewash finish 2Cr13 stainless handles with lanyard slot. Stainless pocket clip. Designed by Lucas Burnley. Made in China.

2 1/8" closed. 2" black finish 8Cr13MoV stainless hollow ground drop point blade with dual thumb studs. Black stonewash finish 2Cr13 stainless handles with lanyard slot. Black finish stainless pocket clip. Designed by Lucas Burnley. Made in China.

Overall: 16"; Blade: Carbon Steel | Standard Edge; Handle: Brown; Other Info: 5" 1055 forged carbon steel axe head with 3.5" cutting edge. Tennessee hickory wood handle. Black molded sheath. Designed by Elmer Roush. Hang packaged. Made in China.

7 1/4" overall. 3" satin finish 8Cr13MoV stainless drop point blade. Hardened to 58-60 HRC. Full tang. G-10 handles with red mosaic pins. Lanyard hole. Dark purple braided cord lanyard. Brown basket weave style leather belt sheath. Includes an extra black braided cord lanyard. Designed by Larry Fischer. 100% of the net profits of this knife go to the Pancreatic Cancer Action Network in memory of Larry Fischer. Made in China.

4 1/2" closed framelock. 3 5/8" black corrosion resistant finish AUS-8A stainless modified tanto blade with thumb lug. Hardened to 57-59 HRC. Features the manual LAWKS® safety system. Black G-10 handle on front and black finish 420 J2 stainless handle on back. Lanyard hole. Reversible black stainless pocket clip. Designed by James Williams. Compact version of the popular Otanashi noh Ken. Made in China.

7 1/8" closed. 11" open. 6" 5Cr13MoV stainless satin finish fillet blade. Innovative "Tail Lock" safety bar folds to securely lock the blade. Black glass filled nylon handles with green plastic trim. Black nylon belt sheath. Designed by Ken Steigerwalt. Made in China.

9 1/4" overall. 4 1/2" satin finish 1075 high carbon steel drop point blade with Scandi grind. Hardened to 50-55 HRC. Full tang. Ergonomic walnut handles with brass pins. Lanyard hole. Black leather belt sheath. Includes a special steel Bushcraft's accessory tool that can help wedge, pry, collect pitch, strike a fire starter and assist in a variety of tasks. Designed by Abe Elias. Made in El Salvador.

4 3/4" closed linerlock. 8Cr13MoV stainless standard edge blade with sharpened straight chisel tip edge and dual thumb studs. Hand contoured black and white swirled micarta handles. Handle features a rounded cross section, deep finger choil, and pommel swell, plus grip notches at the finger tips and friction grooves at the thumb. LAWKS safety system. Removable black finish stainless pocket clip. Designed by Jon and Josh Graham. Made in China.

4 1/2" closed buttonlock. 3 3/8" satin finish 8Cr13MoV stainless drop point blade with dual grind, dual thumb studs and flipper. Hardened to 58-60 HRC. Grooved and textured 6061-T6 aluminum handles. Lanyard hole. Stainless pocket clip. Designed by Brian Tighe. Made in China.

2 7/8" closed Slip-Joint gentleman's folder. 2 1/4" 8Cr13MoV stainless wharncliffe blade. Mother of pearl handles with stainless bolsters. Designed by Ken Steigerwalt. Made in China.

3 7/8" closed linerlock. 2 7/8" bead blast finish 8Cr13MoV stainless standard edge drop point blade with gray titanium nitride coating and thumb stud. OutBurst® assisted opening, FireSafe® blade opening mechanism which is incorporated into the thumb stud. To open, simply depress the thumb stud while pressuring the blade open and the system releases the blade fully open. Black G-10 handles. Black stainless pocket clip. Designed by Ken Steigerwalt. Made in China.

5 1/8" closed. 4" stonewash finish AUS-8 stainless modified tanto blade with dual grind, fuller groove and thumb lug. Hardened to 57-59 HRC. Black G-10 handles with the Terzuola dragon logo. Stainless pocket clip. Designed by Bob Terzuola. Made in China.

Single weave. Color: Fuchsia. Size: Large. Goes around your wrist and saves your hide. Designed to let you quickly deploy an emergency paracord for tourniquets, lashing or anything else, all with easy-to-use pull tabs. Simply pull on the tab to loosen the loop and easily deploy the paracord. Contains approximately 7' of cord. CRKT medallion with dual threading holes. Designed by Jason Scarvalas. Made in China.

Single weave. Color: Fuchsia. Size: Small. Goes around your wrist and saves your hide. Designed to let you quickly deploy an emergency paracord for tourniquets, lashing or anything else, all with easy-to-use pull tabs. Simply pull on the tab to loosen the loop and easily deploy the paracord. Contains approximately 6.25' of cord. CRKT medallion with dual threading holes. Designed by Jason Scarvalas. Made in China.

Type: Lockback; Closed: 5.25"; Blade: 4" | CTS-XHP Stainless | Standard Edge | Black Finish; Handle: Tan | G-10; Other Info: Pocket Clip | Thumb Stud(s). Clip point blade. Comes with extra pocket clip. Designed in collaboration with celebrity wrestler Mr. Steve Austin. Boxed. Made in Taiwan.

Type: Lockback; Closed: 5.25"; Blade: 4" | CTS-XHP Stainless | Standard Edge | Black Finish; Handle: Green | G-10; Other Info: Pocket Clip | Thumb Stud(s). Clip point blade. Comes with extra pocket clip. Designed in collaboration with celebrity wrestler Mr. Steve Austin. Boxed. Made in Taiwan.

Closed: 5.25"; Blade: 4" | CTS-XHP Stainless | Standard Edge | Black Finish; Handle: Blue | G-10; Other Info: Pocket Clip | Thumb Stud(s). Clip point blade. Comes with extra pocket clip. Designed in collaboration with celebrity wrestler Mr. Steve Austin. Boxed. Made in Taiwan.

Type: Lockback; Blade: CTS-XHP Stainless; Handle: Orange | G-10; Other Info: Pocket Clip | Thumb Stud(s). Clip blade. Comes with extra pocket clip. Designed in collaboration with celebrity wrestler Mr. Steve Austin. Boxed. Made in Taiwan.

Type: Lockback; Closed: 5.25"; Blade: 4" | CTS-XHP Stainless | Standard Edge | Black Finish; Handle: Pink | G-10; Other Info: Pocket Clip | Thumb Stud(s). Clip point blade. Comes with extra pocket clip. Designed in collaboration with celebrity wrestler Mr. Steve Austin. Boxed. Made in Taiwan.

Type: Lockback; Closed: 5.25"; Blade: 4" | CTS-XHP Stainless | Standard Edge | Black Finish; Handle: Gray | G-10; Other Info: Pocket Clip | Thumb Stud(s). Clip point blade. Comes with extra pocket clip. Designed in collaboration with celebrity wrestler Mr. Steve Austin. Boxed. Made in Taiwan.

37 3/4" overall. 32" black finish 1055 carbon steel blade. Black cord wrapped rayskin handle. Black heavy-duty leather scabbard with leather belt frog and blued steel fittings. A newly developed fighting saber for the modern martial artist designed by Cold Steel President Lynn Thompson. Made in Taiwan.

44.38" overall. Rubber tip. Renowned martial artist Steven Seagal worked with Cold Steel President Lynn C. Thompson, bringing together their combined knowledge, to create this signature edition walking stick. Elements of the Bokken design are incorporated into this utterly unique crook topped walking stick. Polymer construction. Color: Black. Made in Taiwan.

Close Range/Control Response Medium ImPact Tool. 5 3/4" closed. 2 3/4" 8Cr13MoV stainless, non-cutting, linerlocking, blunt tip blade with grabbing teeth all around the blade and thumb hole pull. Hardened to 58 HRC. Blue G-10 handles. Integrated seat belt cutter and lanyard hole. Reversible wide stainless pocket clip. A non-lethal mini-expandable tool that can expand and retract all within use of force allowing for trapping, control, takedown, impact and restraint of individuals. Can easily be used against other tools or weapons of opportunity with measured force. CRMIPT is equipped with Flex cuff cutter/seat belt cutter/clothing cutter to be used for safety and emergency rescue situations. CRMIPT Ramp and Cutter both act as glass/windshield breakers for emergency situations. CRMIPT is a personal defensive impact rescue tool. Designed by Bram Frank. Made in China.

5" closed linerlock. 3 7/8" matte finish high carbon 400 series stainless spring assisted opening blade with dual thumb studs. Max-Lock system double-locks the blade open and closed. Textured black composition handles. Removable/reversible stainless pocket clip. Ron Lake design. Hang packaged. Made in China.

5" closed linerlock. 3 7/8" black finish partially serrated high carbon 400 series stainless spring assisted opening blade with dual thumb studs. Max-Lock system double-locks the blade open and closed. Textured black composition handles. Black finish removable/reversible stainless pocket clip. Ron Lake design. Hang packaged. Made in China.

7 1/2" overall. 3 1/2" Vanadium molybdenum steel wide bellied blade with thumb ridge and lashing hole. Hardened to 55 HRC. Black micarta handles with finger guard. Dual lanyard/lashing holes. Embossed black leather belt sheath. Designed by A. Corts. Made in Spain.

5 3/4" overall. One piece 154CM stainless construction with integrated finger hole. 2 5/8" claw blade. Black cord wrapped handle. Black molded Kydex belt sheath. Bulk packed. Designed and handmade in USA by Dirk Pinkerton.

4 1/8" overall. One piece 154CM stainless construction with integrated finger hole. 1 5/8" double edge dagger blade. Black cord wrapped handle. Black molded Kydex sheath with neck chain. Bulk packed. Designed and handmade in USA by Dirk Pinkerton.

Due to PayPal restrictions, we must 'shut off' this item to ensure it will not be paid for with PayPal. Please call us if you would like to place an order. We apologize for any inconvenience this may cause.

4 1/2" overall. 1 7/8" tanto blade. One piece black stonewash finish 154CM stainless construction. Handle features dual lashing holes and grooves for the ability to wrap the handle in paracord. Molded black friction-fit Kydex sheath. Black beaded neck chain. Designed by Master Sergeant Grady Burrell. Made in the USA.

16 1/2" overall. 11 1/4" 440C heat treated, rust resistant stainless blade. Black leather wrapped handle. Brass extra large handguard and pommel. Antique style black/brown leather scabbard with classic old western style floral pattern. Features classic styling and modern durability. Designed by James Black. Made in Taiwan.

The joining of Tactical and Practical making this knife at home in the American forests or the battlefields around the world. 11 1/8" overall. 5 7/8" black powder coated 1095 carbon steel blade etched Chestnut Mountain Proving Grounds, Marion, NC. Blade features sharpened upper swedge which enhances penetration. Black canvas micarta handles. Black Kydex sheath with adjustable tensioner, clip plate, paracord, and cord lock. Sheath hardware: 4 each - screws, rubber washers, and barrel nuts. Designed by Terrill Hoffman. Made in the USA.

6.25" overall. 2.5" black stonewash finish 1095HC steel drop point blade. Orange G10 handle. Full tang. Lanyard hole. Designed by Cody Rowan. Brown leather belt sheath. Boxed. Made in the USA.

7 5/8" overall. 3 1/2" stonewash finish 1095 uncoated carbon steel drop point blade with a flat grind. Full tang. Contoured green micarta handles. Handles are removable to allow the user to apply a traditional patina to the blade without the need for removing a blade coating. Lanyard hole. Embossed brown leather belt sheath. Includes survival card. Serialized. Designed by James Gibson. Made in the USA.

7.63" overall. 3.5" stonewash finish 1095HC steel drop point blade. Canvas micarta handle. Full tang. Lanyard hole. Brown leather belt sheath. Designed by James Gibson. Bulk packed. Made in the USA.

8 1/8" overall. 3 1/2" stonewash finish uncoated 1095 high carbon steel drop blade with Scandi blade grind and Camp Lore blade etch. Full tang. Removable OD green canvas micarta handles. Tan leather belt sheath. Includes survival information card and Esee window sticker. Designed by Reuben Bolieu. Made in the USA.

6.75" overall. 2.5" drop point blade. Finger ring. One piece black oxide finish, flat ground Elmax steel construction. Striking pommel. Black Kydex belt sheath with IWB clip. Designed by Ryan Hoover. Boxed. Made in the USA.

6.5" overall. 2.5" unsharpened blunt tip blade. Finger ring. One piece red aluminum construction with striking pommel. Black Kydex belt sheath with IWB clip. Designed by Ryan Hoover. Boxed. Made in the USA.

7 3/8" overall. 3 1/4" 440C stainless sheepsfoot blade with thumb ridge. Full tang. Black 3D machined G-10 handles with drilled hole design. Lanyard hole. Black Kydex belt sheath. Designed by renowned knife designer Les George. Made in the USA.

7 3/8" overall. 3 1/4" 440C stainless sheepsfoot blade with thumb ridge. Full tang. Black 3D machined G-10 handles. Lanyard hole. Black Kydex belt sheath. Designed by renowned knife designer Les George. Made in the USA.

Grade 5 titanium construction. Stonewash finish. Hardware kit includes three titanium barrel spacers, two center body screws, and ten screws for the spacers and pocket clip (one spare). Uses stock pivot assembly. The handle kit weighs about 3.25 oz. and adds just under 3 ounces to the standard Benchmade Griptilian model. Designed by TJ Schwartz. Bulk packed. Made in China.

Carbon fiber construction. Hardware kit includes three titanium barrel spacers, two center body screws, and ten screws for the spacers and pocket clip (one spare). Uses stock pivot assembly. The handle kit weighs about 1.15 oz. and adds roughly a half an ounce to the standard Benchmade Griptilian model. Designed by TJ Schwartz. Bulk packed. Made in China.

14 1/2" overall. 9 1/2" black finish N690Co Cobalt Vanadium stainless kukri blade. Full tang. Black Forprene handles. Integral guard and lanyard ring. Black Cordura M.O.L.L.E. compatible belt sheath with leg straps. Boris Sterm design. Made in Italy.

14 1/2" overall. 9 1/2" black finish N690Co Cobalt Vanadium stainless kukri blade. Full tang. Black Forprene handles. Integral guard and lanyard ring. Black Cordura M.O.L.L.E. compatible belt sheath with leg straps. Boris Sterm design. Made in Italy.

4 3/4" closed. 3 3/4" N690Co Cobalt Vanadium stainless blade with black DLC coating. Black G-10 handles with tempered stainless glass breaker tip. Lanyard hole. Black finish stainless pocket clip. Black nylon zippered storage pouch. Design by Borut Kincl Official trainer of Slovenija Army. Made in Italy.

Includes two 8 3/4" overall steak knives with 4 5/8" stainless standard edge blades. Hardened to 58 HRC. Oval designed masur birch wood handles with aluminum ferrule. Gift boxed. Designed by award-winning chef Mathias Dahlgren. Made in Sweden.

6 7/8" overall. 3 3/8" S35VN stainless drop point blade. Blue "Reptile" Zytel handles. Brown custom leather sheath with six grommet holes. Comes with 8' of purple and green stripe paracord, custom pewter lanyard bead with stylized Snody "S" logo, and extra set of interchangeable purple "Dolla Holla" handles. Designed by Mike Snody. Made in U.S.A.

9" overall. 4 1/2" S35VN stainless drop point blade. Blue "Reptile" Zytel handles. Brown custom leather sheath with eight grommet holes. Comes with 8' of purple and green stripe paracord, custom pewter lanyard bead with stylized Snody "S" logo, and extra set of interchangeable purple "Dolla Holla" handles. Designed by Mike Snody. Made in U.S.A.

6 1/2" overall neck knife. 2 3/8" blade. One-piece S35VN stainless construction with finger ring. Lime green molded sheath. Comes with blue and green cord lanyard and custom designed stainless lanyard bead. Mike Snody design. Made in U.S.A.

8.5" overall. 4.75" satin finish S35VN steel blade. Black G10 handle. Full tang. Black Kydex belt sheath. Designed by Dirk Pinkerton. Boxed. Made in China.

3.75" closed. 2.75" stonewash finish CPM S35VN stainless drop point blade. Gray matte finish titanium handle. Pocket clip. Designed by Justin Lundquist. camo nylon zippered storage case. Boxed. Made in China.

4 1/4" closed. 3 1/4" S35VN stainless drop point blade with extended tang. Gray finish titanium handle. Titanium pocket clip. Digital camo zippered storage pouch. Designed by Michael Vagnino. Made in China.

4 3/4" closed. 3 1/4" S35VN stainless recurve drop point blade with extended tang. Gray finish titanium handle. Titanium pocket clip. Digital camo zippered storage pouch. Designed by Michael Vagnino. Made in China.

4 3/4" closed framelock. 3 1/2" stonewash finish S35VN stainless clip point blade with extended tang. 6AL4V titanium handles. Ball bearing system for smooth opening. Titanium pocket clip. Comes with cleaning cloth. Designed by Matt Cucchiaria Custom Knives. Made in China.

4 3/4" closed framelock. 3 1/2" stonewash finish S35VN stainless clip point blade with extended tang. 6AL4V titanium handles with skull artwork. Ball bearing system for smooth opening. Titanium pocket clip. Comes with cleaning cloth. Designed by Matt Cucchiaria Custom Knives. Made in China.

4 7/8" closed framelock. 3 1/2" stonewash finish S35VN stainless clip point blade with extended tang. 6AL4V titanium handles. Ball bearing system for smooth opening. Titanium pocket clip. Comes with cleaning cloth. Designed by Matt Cucchiaria Custom Knives. Made in China.

5 1/8" closed. 3 7/8" stonewash finish CPM-S35VN stainless standard edge drop point blade with extended tang. Gray finish 6AL4V titanium handles. Milled titanium pocket clip. Designed by Matt Cucchiara. Made in China.

5 1/8" closed. 3 7/8" stonewash finish CPM-S35VN stainless standard edge blade with extended tang. Stonewash finish 6AL4V titanium handles with a blue anodized dragon etched outline and machined border. Milled stonewash finish titanium pocket clip. Designed by Matt Cucchiara. Made in China.

5 1/2" closed. 4 1/8" stonewash finish CPM-S35VN stainless standard edge recurve spear blade with extended tang and thumb ridge. Gray finish 6AL4V titanium handles. Lanyard hole. Milled titanium pocket clip. Designed by Matt Cucchiara. Made in China.

5 1/2" closed. 4 1/8" stonewash finish CPM-S35VN stainless standard edge blade with extended tang and thumb ridge. Stonewash finish 6AL4V titanium handles with blue anodized Big Dog bombs etchings. Milled stonewash finish titanium pocket clip. Designed by Matt Cucchiara, Made in China.

4 7/8" closed. 3 1/2" stonewash finish CPM-S35VN stainless standard edge drop point blade with extended tang. Grooved light gray finish 6AL4V titanium handles. Milled titanium pocket clip. Designed by Matt Cucchiara. Made in China.

4 7/8" closed. 3 1/2" stonewash finish CPM-S35VN stainless standard edge drop point blade with extended tang. Grooved dark gray finish 6AL4V titanium handles. Milled titanium pocket clip. Designed by Matt Cucchiara. Made in China.

10.5" overall. 6.5" blade. Lanyard hole. One piece brushed finish 420 stainless construction. Weight: 12.5oz. Designed by Russian Throwing Knife Instructor, Grandmaster V.S. Kovrov. Boxed. Made in Russia.

4 1/2" closed linerlock. 3 1/2" bead blast finish 8Cr13MoV stainless blade with dual thumb studs and extended tang. Black 3-D machined G-10 handles with slot cutouts. Reversible stainless pocket clip. Designed by Todd Rexford. Made in China.

4" closed framelock. 3" black-oxide BlackWash finish 8Cr13MoV stainless drop point blade with flipper. SpeedSafe assisted opening. Black-oxide BlackWash finish 420 stainless handles. Reversible pocket clip. Todd Rexford design. Made in China.

6 3/4" closed. 3 1/4" black finish tanto blade with thumb stud. Black finish stainless gun shaped frame with finger hole. Textured black G-10 onlay handles. Black finish stainless pocket clip. May be held in various positions as shown on enclosed information sheet. Designed by Jeff Thenier. Made in France.

9 1/4" overall. 3 1/2" ATS-34 stainless drop point blade. Ebony wood comfort grip handle with stainless finger guard and pommel with lanyard hole. Handle features a unique glow stick light system. Two light conductive cones of acrylic glass which are encased in aluminum rings, are inserted into the wood handles. When using the knife in the dark, activate a glow stick by slight bending and shaking until it glows. Unscrew pommel end of knife and insert glow stick. Yellow light will glow for several hours. 20 glow sticks are included. Black leather belt sheath. Packaged in deluxe cardboard gift/storage box. Designed by Peter Rosenkaimer. Made in Germany.

4 3/4" closed. 3 1/8" matte finish 440C stainless blade with dual thumb studs, thumb slot, and extended tang. Black G10 handles. Front handle has green G10 trim. Lanyard hole. Two position stainless pocket clip. Mikkel Willumsen design. Made in China.

5 1/2" closed. 3 3/4" matte finish Sandvik 12C27 stainless blade with dual thumb studs, thumb slot, and extended tang. Black G10 handles. Front handle has green G10 trim. Lanyard hole. Two position stainless pocket clip. Mikkel Willumsen design. Made in China.

4 3/8" closed. 2 3/4" two tone brushed and stonewash finish 440C stainless blade. Black textured nylon handles. Lanyard hole. Four-way position stonewash finish stainless pocket clip. Designed by Mikkel Willumsen. Boxed. Made in China.

Three Rapid Exchange. 4" closed. 2 7/8" stonewash finish Bohler M390 stainless drop point blade with removable flipper. Hardened to 60-61 HRC. This knife is equipped with a patented system that allows the user to carry the knife with or without the flipper feature. Titanium 6AI4V frame with finely milled grooved matte gray finish titanium handles. IKBS ball-bearing pivot system to improve the knife opening and closing and give the T.R.E. knife an ultra-fast opening action. Lanyard hole. Reversible blue finish titanium pocket clip. Includes a keyring with both Torx T6 and Torx T8 bits for the positioning or the removal of the flipper, thumb stud and the pocket clip. Packaged in wooden box that holds all. The user may choose three ways to equip his knife: a simple basic version without the flipper and pin on the blade, a thumb stud version with the pin on the blade or adding the flipper for a quick opening action. Designed by Molletta Pensato Michele. Made in Italy.

Three Rapid Exchange. 4" closed. 2 7/8" stonewash finish Bohler M390 stainless drop point blade with removable flipper. Hardened to 60-61 HRC. This knife is equipped with a patented system that allows the user to carry the knife with or without the flipper feature. Titanium 6AI4V frame with finely milled grooved matte gray finish titanium handles. IKBS ball-bearing pivot system to improve the knife opening and closing and give the T.R.E. knife an ultra-fast opening action. Lanyard hole. Reversible bronze finish titanium pocket clip. Includes a keyring with both Torx T6 and Torx T8 bits for the positioning or the removal of the flipper, thumb stud and the pocket clip. Packaged in wooden box that holds all. The user may choose three ways to equip his knife: a simple basic version without the flipper and pin on the blade, a thumb stud version with the pin on the blade or adding the flipper for a quick opening action. Designed by Molletta Pensato Michele. Made in Italy.

Three Rapid Exchange. 4" closed. 2 7/8" stonewash finish Bohler M390 stainless drop point blade with removable flipper. Hardened to 60-61 HRC. This knife is equipped with a patented system that allows the user to carry the knife with or without the flipper feature. Titanium 6AI4V frame with black carbon fiber handle on front and finely milled grooved matte gray finish titanium handle on back. IKBS ball-bearing pivot system to improve the knife opening and closing and give the T.R.E. knife an ultra-fast opening action. Lanyard hole. Reversible titanium pocket clip. Includes a keyring with both Torx T6 and Torx T8 bits for the positioning or the removal of the flipper, thumb stud and the pocket clip. Packaged in wooden box that holds all. The user may choose three ways to equip his knife: a simple basic version without the flipper and pin on the blade, a thumb stud version with the pin on the blade or adding the flipper for a quick opening action. Designed by Molletta Pensato Michele. Made in Italy.

4" closed. 2 7/8" stonewash finish Bohler M390 stainless drop point blade with flipper. Features IKBS ball-bearing pivot system for ultra-fast opening action. Black G-10 front handle. Titanium 6AI4V back handle/frame with finely milled grooved matte gray finish. Lanyard hole. Reversible gray finish titanium pocket clip. Designed by Molletta Pensato Michele. Made in Italy.

4" closed. 2 7/8" stonewash finish Bohler M390 stainless drop point blade with flipper. Features IKBS ball-bearing pivot system for ultra-fast opening action. Green G-10 front handle. Titanium 6AI4V back handle/frame with finely milled grooved matte gray finish. Lanyard hole. Reversible gray finish titanium pocket clip. Designed by Molletta Pensato Michele. Made in Italy.

4" closed. 2 7/8" stonewash finish Bohler M390 stainless drop point blade with flipper. Features IKBS ball-bearing pivot system for ultra-fast opening action. Orange G-10 front handle. Titanium 6AI4V back handle/frame with finely milled grooved matte gray finish. Lanyard hole. Reversible gray finish titanium pocket clip. Designed by Molletta Pensato Michele. Made in Italy.

4" closed. 2 7/8" stonewash finish Bohler M390 stainless drop point blade with flipper. Features IKBS ball-bearing pivot system for ultra-fast opening action. Pink G-10 front handle. Titanium 6AI4V back handle/frame with finely milled grooved matte gray finish. Lanyard hole. Reversible gray finish titanium pocket clip. Designed by Molletta Pensato Michele. Made in Italy.

Three Rapid Exchange. 4" closed. 2 7/8" stonewash finish Bohler M390 stainless drop point blade with removable flipper. Hardened to 60-61 HRC. This knife is equipped with a patented system that allows the user to carry the knife with or without the flipper feature. Titanium 6AI4V frame with finely milled grooved matte gray finish titanium handles. IKBS ball-bearing pivot system to improve the knife opening and closing and give the T.R.E. knife an ultra-fast opening action. Lanyard hole. Reversible titanium pocket clip. Includes a keyring with both Torx T6 and Torx T8 bits for the positioning or the removal of the flipper, thumb stud and the pocket clip. Packaged in wooden box that holds all. The user may choose three ways to equip his knife: a simple basic version without the flipper and pin on the blade, a thumb stud version with the pin on the blade or adding the flipper for a quick opening action. Designed by Molletta Pensato Michele. Made in Italy.

Type: Framelock; Closed: 4.5"; Blade: 3.25" | Damascus Steel | Standard Edge; Other Info: Lanyard Hole | Pocket Clip | Thumb Slot. Sandblasted titanium handles with glass breaker end. Designed by Chad Nichols. Comes in plexiglass tube. Bulk packed. Made in Italy.

11 1/2" overall. 6 1/2" 440 stainless blade with filework. Brown rich grain wood handle with polished stainless guard and pommel. Brown leather belt sheath. Designed by Nicolai Lilin. Made in Italy.

10" overall. 4 5/8" bead blast finish ELMAX modified clip point blade with sharpened top edge, Apocalyptic grind, finger choil and thumb ridge. Full tang. 3D machined black carbon fiber handles with finger guard. Heart shaped lanyard hole. Black molded carbon fiber finish Kydex sheath with Blade-Tech clips and black nylon cord lanyard. Date of manufacture. Certificate of Authenticity metal plate. Designed by Anthony Marfione and Sean Marfione. Made in the USA.

8 3/8" overall. AUS-8 stainless interchangeable drop point skinner and guthook blades. Simply push the lock button to change the blade. Black rubberized Kraton handles. Black nylon belt sheath. The Swing blade is an international knife combining the design efforts of Outdoor Edge president David Bloch, EKA Knives of Sweden (founded in 1882) and professional Swedish hunter Thomas Ekberg. Assembled in China with imported parts - Quality control and packing done by Outdoor Edge in the US.

17 3/8" overall. 10 1/2" black powder coated 55 Mn carbon spring steel bowie blade with sawback and thumb ridge. Contoured dark brown rubberized TPR handle with glass/nylon core and rubber inlay shield. Black nylon belt sheath. Hang packaged. Designed by custom knifemaker Jerry Hossom. Made in China.

8 3/8" overall. AUS-8 stainless interchangeable drop point skinner and guthook blades. Simply push the lock button to change the blade. Blaze orange rubberized Kraton handles. Black nylon belt sheath. The Swing blade is an international knife combining the design efforts of Outdoor Edge president David Bloch, EKA Knives of Sweden (founded in 1882) and professional Swedish hunter Thomas Ekberg. Assembled in China with imported parts - Quality control and packing done by Outdoor Edge in the US.

12" overall. 6 3/4" Sandvik 14C28N stainless Santoku blade. Amber Ultem transparent handle with black Kraton grip. Designed by Dan Maragni. Made in the USA.

15 1/4" overall. 9 7/8" Sandvik 14C28N stainless serrated blade with rounded tip. Hardened to 57-59 HRC. Full tang. Amber Ultem transparent handle with black Kraton grip. Designed by Dan Maragni. Made in the USA.

9 1/4" overall. 5" Sandvik 14C28N stainless serrated blade. Amber Ultem transparent handle with black Kraton grip. Designed by DanMaragni. Made in the USA.

7 1/2" overall. 3 3/8" Sandvik 14C28N stainless blade. Hardened to 57-59 HRC. Full tang. Amber Ultem transparent handle with black Kraton grip. Designed by Dan Maragni. Made in the USA.

Includes one 14 3/4" overall chef's knife with 9 3/8" blade and one 7 1/2" overall paring knife with 3 3/8" blade. Both knives feature Sandvik 14C28N stainless blades, hardened to 57-59 HRC, full tangs and amber Ultem transparent handles with black Kraton grips. Designed by Dan Maragni. Made in the USA.

Wilderness Survival Knife. 10" overall. 5" SK5 steel blade. Full tang. Black micarta handle. Tan nylon MOLLE compatible belt sheath with protective insert. Designed by Paul Scheiter. Boxed. Made in the USA.

10" overall. 5" 154CM stainless blade with SOC (Special Operations Capable) black powder coat finish. Full tang. Black micarta handles. Lanyard slot. Black nylon M.O.L.L.E. compatible belt sheath. Designed by Paul Scheiter. Made in the USA.

Closed: 4.38"; Blade: 3.25" | Sandvik 12C27 Stainless | Standard Edge | Mirror Polish Finish; Other Info: Intricate "sinusoidal" marqueterie design wood handle. Each handle is unique. Safety ring for locking the blade. Velvet slip pouch. Designed by Bruno Chaperon. Gift boxed. Boxed. Made in France.

Closed: 3.63"; Blade: 2.75" | Sandvik 12C27 Stainless | Standard Edge | Mirror Polish Finish; Other Info: Intricate "sinusoidal" marqueterie design wood handle. Each handle is unique. Safety ring for locking the blade. Velvet slip pouch. Designed by Bruno Chaperon. Gift boxed. Boxed. Made in France.

39 1/2" overall. 28 7/8" sharpened carbon steel blade. Black leather-over-cranberry rayskin handle. Stainless hilt and pommel. Rosewood scabbard with matching metal fittings. Designed by Scott M. Rodell. Made in China.

39.5" overall. 29" 5160 carbon steel blade. Black cord wrapped handle. Metal alloy guard and metal alloy pommel. Rolled tip. Safe blunted edges. Designed by Scott Rodell. Boxed. Made in China.

8 5/8" overall. 4" stainless blade with black finish. Full tang. Black and gray G-10 handles. Black nylon belt sheath. Serialized. Limited edition of 200. Les George design. Made in U.S.A.

8 5/8" overall. 4" stainless blade with black and green splash finish. Full tang. Black G-10 handles. Black nylon belt sheath. Serialized. Limited edition of 200. Les George design. Made in U.S.A.

8 5/8" overall. 4" OD green finish stainless blade. Full tang. Textured black G-10 handles. Les George design. Black nylon belt sheath. Serialized. Made in the USA.

8 5/8" overall. 4" stainless blade with sand camo stripe finish. Full tang. Black G-10 handles. Black nylon belt sheath. Serialized. Limited edition of 200. Les George design. Made in U.S.A.

5 1/4" closed button lock. 4" black DLC finish 154CM stainless manual opening blade with thumb stud. Black anodized aluminum handles with sterling silver skull inlay shield, black finish stainless pocket clip and integrated glass breaker tip. Enlarged lanyard loop with braided black and gray cord lanyard with skull bead. Black nylon MOLLE adaptable belt sheath. Designed by Bruce Shaw. Serialized. Limited edition of 500. Made in the USA.

The Banshee is the second instalment from the newest designer to the team Jakub Wieczorkiewicz (Poltergeist Works). The anti-slip under teeth under the belly and that run across the top of the blade allow for stronger control of what the user desires of the knife. The blade is a Hawkbill curved blade that looks as fierce as it’s name meaning pertains. Blade: D2 Blade Length: 85 mm / 3.35 in Blade Thickness: 3.05 mm / 0.12 in Total Length: 200 mm / 7.87 in Handle: G10 Made in China.

6.25" overall. 2.5" stonewash finish 8Cr14MoV stainless blade. Black cord wrapped handle. Lanyard hole. Developed and designed by Ostap Hel precisely for usage in survival situations. With three milled out holes along the body the knife can be used as a spear for hunting. Black Kydex neck sheath. Boxed. Made in China.

4 1/4" closed. 3 1/4" black stonewashed finish 8Cr14MoV stainless drop point blade with dual thumb studs and extended tang. OD green textured G-10 handles with lanyard hole and dual lanyard/lashing holes. Stainless pocket clip. Designed by Liang Gang. Made in China.

4 1/4" closed. 3 1/4" black stonewashed finish 8Cr14MoV stainless drop point blade with dual thumb studs and extended tang. Coyote tan textured G-10 handles with lanyard hole and dual lanyard/lashing holes. Stainless pocket clip. Designed by Liang Gang. Made in China.

4 1/4" closed. 3 1/4" stonewashed finish 8Cr14MoV stainless drop point blade with dual thumb studs and extended tang. Black textured G-10 handles with lanyard hole and dual lanyard/lashing holes. Stainless pocket clip. Designed by Liang Gang. Made in China.

4 3/4" closed linerlock. 3 5/8" stonewash finish Sandvik 14C28N stainless standard edge drop point blade with dual thumb studs, extended tang and thumb ridge. Black fingergrooved G-10 handles. Lanyard hole. Reversible stainless pocket clip. Designed by Liang Gang. Made in China.

4 3/4" closed linerlock. 3 5/8" stonewash finish Sandvik 14C28N stainless standard edge drop point blade with dual thumb studs, extended tang and thumb ridge. Dark earth brown fingergrooved G-10 handles. Lanyard hole. Reversible stainless pocket clip. Designed by Liang Gang. Made in China.

4.63" closed. 3.5" satin finish stainless drop point blade. Gray smooth titanium handle. Thumb pull. Pocket clip. Carbon fiber handle inlays. Serialized. Certificate of Authenticity. Designed by Carson Huang. Boxed. Made in China.

4.88" closed. 3.5" stonewash finish CTS-204P stainless drop point blade. Titanium handle with carbon fiber onlay. Thumb stud. Pocket clip. Designed by Carson Huang. Boxed. Made in China.

Type: Assisted Opening; Closed: 4"; Blade: 3.125" l 8Cr13MoV Stainless l Standard Edge l Black Stonewash Finish; Handle: Black l GRN; Other Info: Thumb Stud(s) l Pocket Clip. Drop point blade with Ruger on front and CRKT on back. Outburst assisted opening mechanism. Fire Safe blade safety. Ruger American Rifle inspired handles Designed by Ken Steigerwalt. Boxed. Made in China.

Type: Assisted Opening; Closed: 4"; Blade: 3.125" l 8Cr13MoV Stainless l Partially Serrated Edge l Black Stonewash Finish; Handle: Black l GRN; Other Info: Pocket Clip l Thumb Stud(s). Drop point blade with Ruger on front and CRKT on back. Outburst assisted opening mechanism. Fire Safe blade safety. Ruger American Rifle inspired handles Designed by Ken Steigerwalt. Boxed. Made in China.

Type: Assisted Opening; Closed: 4"; Blade: 3.125" l 8Cr13MoV Stainless l Standard Edge l Stonewash Finish; Handle: Black l GRN; Other Info: Pocket Clip l Thumb Stud(s). Drop point blade with Ruger on front and CRKT on back. Outburst assisted opening mechanism. Fire Safe blade safety. Ruger American Rifle inspired handles Designed by Ken Steigerwalt. Boxed. Made in China.

Type: Assisted Opening; Closed: 4"; Blade: 3.125" l 8Cr13MoV Stainless l Partially Serrated Edge l Stonewash Finish; Handle: Black l GRN; Other Info: Pocket Clip l Thumb Stud(s). Drop point blade with Ruger on front and CRKT on back. Outburst assisted opening mechanism. Fire Safe blade safety. Ruger American Rifle inspired handles Designed by Ken Steigerwalt. Boxed. Made in China.

Closed: 6.25"; Blade: 5" l 8Cr13MoV Stainless l Standard Edge l Stonewash Finish; Handle: Black l Aluminum; Other Info: Thumb Stud(s) l Thumb Ridge. Drop point blade with Ruger on front and CRKT on back. Hard anodized sure grip handles with drilled hole design. Black nylon belt sheath. Designed by Bill Harsey. Boxed. Made in China.

Closed: 6.25"; Blade: 5" l 8Cr13MoV Stainless l Veff Serrated Edge l Stonewash Finish; Handle: Black l Aluminum; Other Info: Thumb Stud(s) l Thumb Ridge. Drop point blade with Ruger on front and CRKT on back. Hard anodized sure grip handles with drilled hole design. Black nylon belt sheath. Designed by Bill Harsey. Boxed. Made in China.

Type: Linerlock; Closed: 4.375"; Blade: 3.5" l 8Cr13MoV Stainless l Standard Edge l Stonewash Finish; Handle: Black l Aluminum; Other Info: Thumb Stud(s) l Thumb Ridge. Drop point blade with Ruger on front and CRKT on back. Hard anodized sure grip handles with drilled hole design. Black nylon belt sheath. Designed by Bill Harsey. Boxed. Made in China.

Type: Linerlock; Closed: 4.375"; Blade: 3.5" l 8Cr13MoV Stainless l Veff Serrated Edge l Stonewash Finish; Handle: Black l Aluminum; Other Info: Thumb Ridge l Thumb Stud(s). Drop point blade with Ruger on front and CRKT on back. Hard anodized sure grip handles with drilled hole design. Black nylon belt sheath. Designed by Bill Harsey. Boxed. Made in China.

Closed: 4.875"; Blade: 4" l 8Cr13MoV Stainless l Standard Edge l Black Stonewash Finish; Handle: G10; Other Info: Thumb Stud(s) l Thumb Ridge l Lanyard Hole l Pocket Clip. Drop point blade with Ruger on front and CRKT on back. Black and gray handles with black stainless bolster and revolver cylinder-style pivot point. Designed by Bill Harsey. Boxed. Made in China.

Closed: 4.875"; Blade: 4" l 8Cr13MoV Stainless l Veff Serrated Edge l Black Stonewash Finish; Handle: G10; Other Info: Lanyard Hole l Pocket Clip l Thumb Ridge l Thumb Stud(s). Drop point blade with Ruger on front and CRKT on back. Black and gray handles with black stainless bolster and revolver cylinder-style pivot point. Designed by Bill Harsey. Boxed. Made in China.

Closed: 5.5"; Blade: 4" l 8Cr13MoV Stainless l Standard Edge l Black Stonewash Finish; Other Info: Thumb Ridge l Extended Tang l Lanyard Hole l Pocket Clip. Tanto blade with Ruger logo on front and CRKT on back. Black machined hard anodized aluminum front handle. Black stonewash finish stainless back handle. Designed by Robert Carter. Boxed. Made in China.

Closed: 5.5"; Blade: 4" l 8Cr13MoV Stainless l Veff Serrated Edge l Black Stonewash Finish; Other Info: Extended Tang l Lanyard Hole l Pocket Clip l Thumb Ridge. Tanto blade with Ruger logo on front and CRKT on back. Black machined hard anodized aluminum front handle. Black stonewash finish stainless back handle. Designed by Robert Carter. Boxed. Made in China.

Closed: 5"; Blade: 3.625" l 8Cr13MoV Stainless l Standard Edge l Black Stonewash Finish; Other Info: Extended Tang l Lanyard Hole l Pocket Clip l Thumb Ridge. Tanto blade with Ruger logo on front and CRKT on back. Black machined hard anodized aluminum front handle. Black stonewash finish stainless back handle. Designed by Robert Carter. Boxed. Made in China.

Closed: 5"; Blade: 3.625" l 8Cr13MoV Stainless l Veff Serrated Edge l Black Stonewash Finish; Other Info: Extended Tang l Pocket Clip l Thumb Ridge l Lanyard Hole. Tanto blade with Ruger logo on front and CRKT on back. Black machined hard anodized aluminum front handle. Black stonewash finish stainless back handle. Designed by Robert Carter. Boxed. Made in China.

Overall: 8.875"; Blade: 4.375" l 8Cr13MoV Stainless l Standard Edge l Satin Finish; Handle: Black l Rubber; Other Info: Full Tang l Inlay Shield l Lanyard Hole. Drop point blade. Aluminum finger guard. Black nylon belt sheath. Designed by Bill Harsey. Boxed. Made in China.

Overall: 9"; Blade: 4.375" l 8Cr13MoV Stainless l Standard Edge l Satin Finish; Handle: Black l Rubber; Other Info: Full Tang l Inlay Shield l Lanyard Hole. Rising clip point blade. Aluminum finger guard. Black nylon belt sheath. Designed by Bill Harsey. Boxed. Made in China.

4 1/8" closed linerlock. CPM-S30V standard edge blade with thumb hole pull. Carbon fiber handle. Reversible black finish stainless heavy wire pocket clip. The Sage represents Spyderco's 30-year pledge to knife crafting and learning to make better knives at every available opportunity. This model is in recognition of knife maker Michael Walker. Made in Japan.

4 1/8" closed linerlock. CPM-S30V standard edge blade with thumb hole pull. Titanium handles. Reversible stainless heavy wire pocket clip. This knife is the second in the Sage Series. The Sage Series manifests Spyderco's three decades of pioneering knife-crafting and innovating. This model is in recognition of knifemaker Chris Reeve. Made in Taiwan.

4 1/2" closed framelock. 3 3/8" black finish CTS -204P steel blade with thumb hole and flipper. Features Reeve Integral Lock (R.I.L.) mechanism. Textured black G-10 front handle. Black finish titanium back handle. Lanyard hole. Stainless pocket clip. Designed by Brad Southard. Made in Taiwan.

4 7/8" closed. 2 7/8" satin finish VG-10 stainless drop point blade with thumb hole and tang lever. Black G-10 handles. Black faux leather slip pouch with stainless clip. Designed by Filip De Leeuw. Made in Japan.

An extremely stout folding knife built on a framework of solid stainless steel handle liners. 4 1/4" closed. 3 7/8" hybrid tanto-style blade is saber ground from VG-10 stainless steel and features a sweeping point, an index-finger choil, and an unsharpened swedge. Textured black G-10 handle scales. Lanyard hole. Reversible wire style stainless pocket clip. Designed by Alexandru Diaconescu, better known as "Dialex". Made in Japan.

4.5" closed. 2.25" black TiCN coated VG-10 stainless hawkbill blade. Black textured G10 handle. Thumb pull. Pocket clip. Includes karambit ring at the butt end. Designed by Ernest Emerson. Boxed. Made in Japan.