Rubber Handle Knives

This fixed blade knife is 10.63" (27cm) overall. 5.75" (14.61cm) black Cerakote finish saber ground 80CrV2 carbon steel blade. Black TPE handle. Black composite MOLLE compatible belt sheath. Made in Finland.

Stainless blade. Black and tan TPR handle. Includes: 18" overall machete with 12" satin finish sawback tanto blade; 4.5" closed linerlock with 3.5" black stonewash blade; 5" overall fixed blade with 2.5" blade. Fire starter integrated in sheath. Black molded plastic belt sheath. Clam packed. Made in China.

This lockback pocket knife is 4.88" (12.4cm) closed. 3.5" (8.89cm) satin finish partially serrated stainless clip point blade. Black textured rubber handle. Thumb stud. Black nylon belt sheath. Bulk packed. Made in China.

This fixed blade bowie knife is 15.25" (38.74cm) overall. 10" (25.4cm) satin finish bowie blade. Black rubber handle. Stainless guard and pommel. 7Cr13 stainless blade. Black leather belt sheath. Made in China.

This fixed blade knife is 15" (38.1cm) overall. 10.5" (26.67cm) 2Cr13 stainless blade. Black TPR handle. Lanyard hole. Stainless guard. Black and red coated blade. Black TPR leg sheath with polypropylene inner cover. Boxed. Made in China.

This fillet knife is 12.75" (32.39cm) overall. 7" (17.78cm) black titanium coated stainless fillet blade. Blue rubber handle. Lanyard hole. Includes two-step sharpener with tungsten carbide blades and fine ceramic rods. Blue ABS sheath. Clam packed. Made in China.

This fixed blade knife is 9.13" (23.19cm) overall. 4.25" (10.8cm) black Cerakote finish partially serrated 154CM stainless tanto blade. Black rubber handle. Full, extended tang. Lanyard hole. Black Automatic retention belt sheath that is Tek-Lok compatible. Boxed. Made in the USA.

7 5/8" closed lockback. 6 3/8" 420 J2 stainless titanium coated flexible blade. Blue glass reinforced polypropylene with TPE rubberized handle. Stainless guard. Lanyard. Made in China.

This fixed blade fillet knife is 11 1/8" overall. 6 3/8" blade. Titanium coated 420 J2 steel fillet blade. Gray and blue thermoplastic and rubber handle with stainless guard. Lanyard. Gray injection molded plastic sheath with integral belt clip and stylized drain hole. Made in China.

This fixed blade fillet knife is 14 3/8" overall. 9 5/8" blade. Titanium coated 420 J2 steel fillet blade. Gray and blue thermoplastic and rubber handle with stainless guard. Lanyard. Gray injection molded plastic sheath with integral belt clip and stylized drain hole. Made in China.

This fixed blade knife is 8 3/4" overall. 4 1/8" 420HC stainless hollow ground skinning blade with guthook. Textured black rubber handle. Brass guard and pommel. Heavy duty black nylon belt sheath. Made by Buck Knives in the USA.

This fixed blade hunting knife is 8" overall. 4 1/8" 420HC stainless hollow ground drop point blade. Brass guard and pommel. Textured black rubber handles. Heavy duty black nylon belt sheath. Made in the USA.

Includes two 7" overall daggers with 3 7/8" stainless double edged blades. Black rubber handles with lanyard hole. Both daggers store in a black nylon belt sheath. Made in China.

This fixed blade dive knife is 9" overall. 4 5/8" 420 J2 stainless blade with sawback and line cutter. Gray rubberized handle with blue inserts. Molded ABS sheath with rubber arm/leg straps. Made in China.

This fixed blade fillet knife is 12" overall. 6 1/2" blade. Stainless partially serrated blade. Black checkered rubber handle with lanyard hole. Black plastic belt sheath. Made in China.

This fixed blade is 24 1/2" overall. 18" stainless sawback blade. Full tang. Black and gray rubber handles with hand guard. Lanyard. Black nylon belt sheath. Made in China.

This fixed blade dagger is 19 3/4" overall. 13" blade. Black polypropylene construction. Made in Taiwan.

This fixed blade knife is 11 7/8" overall. 6 3/8" blade. One piece rubber construction. Bulk packed. Made in Taiwan.

This fixed blade knife is 11 5/8" overall. 6 3/4" blade. Black Santoprene construction. Lanyard hole. Made in Taiwan.

This fixed blade knife is 13 1/8" overall. 8 1/8" blade. One piece rubber construction. Used as a training tool. Bulk packed. Made in Taiwan.

This fixed blade knife is 11 1/2" overall. 6 3/4" blade. Black Santoprene construction. Lanyard hole. Bulk packed. Made in Taiwan.

This fixed blade knife is 12" overall. 7" blade. All black Santoprene construction. The SF has been carefully fashioned to look as realistic as possible so it can be effectively used in solo practice, training drills, disarm drills, demonstrations and any other activity where you want a reasonably close approximation of realism but not the extreme danger and risk associated with an actual knife. The Santoprene rubber blade is soft enough to prevent the likelihood of most bodily injury. It does however, have a level of firmness that might cause injury to the face or the eyes, so it is recommended that appropriate eye protection or a fencing mask is utilized at all times when using a Cold Steel rubber training knife. Made in Taiwan.

This fixed blade is 23 1/4" overall. 18" 1075 high carbon steel blade with black epoxy powder coating. High impact black polypropylene handle with lanyard hole. No sheath. Made in El Salvador.

This fixed blade knife is 9 1/8" overall. 4 1/2" stainless blade. Olive green textured rubber handle with OD green composition trim. OD green plastic sheath. Bulk packed. Made in Sweden.

This fixed blade is 18 3/4" overall. 10 3/4" black oxide coated high carbon steel blade with sawback. Black Gator textured non-slip handle. Riveted black nylon belt sheath. Hang packaged. Made in China.

This fixed blade knife is 9 3/4" overall. 4 3/4" black oxide finish 420HC stainless partially serrated drop point blade. Full tang. Checkered black rubberized overmold handle. Window punch pommel. M. O. L. L. E. compatible hard synthetic sheath with ballistic nylon backing, belt loop and single strap. Made in U.S.A.

This fixed blade knife is 12 1/2" overall. 7" black coated 440 stainless blade. Black rubberized handle with black sure-grip inlays. Lanyard hole. Black heavy nylon belt sheath. Made in China.

This boot knife is 9" overall. 4 3/4" stainless double edge dagger blade. Black grooved rubber handles. Lanyard hole. Black nylon belt sheath. Made in China.

This fixed blade fillet knife is 10 1/2" overall. 6" flexible stainless fillet blade. Black rubber soft grip handle with logo shield. Stainless finger guard. Black leatherette belt sheath with plastic liner. Comes with pocket sharpener. Hang packaged. Made in China.

Includes 3" caping knife, 4 1/4" guthook skinner, 6" boning/fillet, 6" wood/bone saw, ribcage spreader, tungsten carbide V-sharpener, game cleaning gloves and nylon roll-pack/belt scabbard. Knives have 420 stainless blades and black rubberized handles. Assembled in China with imported parts - Quality control and packing done by Outdoor Edge in the US.

Includes 10 3/4" overall all purpose cleaver with 5 1/4" blade, a 9 1/4" overall guthook hunter with 4 1/2" blade, and a 6 1/2" overall caping knife with 3 1/8" blade. Knives feature a matte finish stainless blade and black checkered rubber handle. All three knives store in a black heavy nylon belt sheath. Made in China.

This boot knife is 7 1/2" overall. 3 1/2" black powder coated stainless false edge dagger blade. Black rubberized handle. Lanyard hole. Black molded composition boot clip sheath. Made in China.

This boot knife is 9 1/8" overall. 4 7/8" black finish stainless double edge blade. Black rubberized handle with lanyard hole. Black leather belt/boot clip sheath. Made in China.

This folding pocket knife is 4 1/4" closed linerlock. Black Teflon coated 4034 stainless standard edge tactical style blade with dual thumb studs. Dark gray anodized aircraft aluminum handles with black rubberized inlay and integrated glass breaker. Black finish stainless pocket clip. M.A.G.I.C. assisted opening blade. Made in Taiwan.

This folding pocket knife is 4 1/4" closed linerlock. 4034 stainless tactical style blade with dual thumb studs. Dark gray anodized aircraft aluminum handles with black rubberized inlay and integrated glass breaker. Black finish stainless pocket clip. M. A. G. I. C. assisted opening blade. Black Teflon coated blade. Made in China.

This folding pocket knife is 4 1/4" closed. Partially serrated black Teflon coated 4034 stainless tactical style blade with dual thumb studs. Desert tan anodized aircraft aluminum handles with black rubberized inlay and integrated glass breaker. Black finish stainless pocket clip. M. A. G. I. C. assisted opening blade. Made in China.

This folding pocket knife is 4 1/4" closed linerlock. 4034 stainless tanto blade with dual thumb studs. Dark gray anodized aircraft aluminum handles with black rubberized inlay and integrated glass breaker. Black finish stainless pocket clip. M.A.G.I.C. assisted opening blade. Black Teflon Coated Blade. Made in Taiwan.

This fixed blade is 17" overall. 11 1/2" blade. Black epoxy powder coated carbon steel blade. Black rubber handle. Leather and cordura sheath. Made in Taiwan.

This fixed blade fillet knife is 12 1/4" overall length. 7 1/8" 420 J2 stainless fillet blade. Black task force rubber handle with neon orange trim. Black ABS plastic sheath. Made in Taiwan.

This fixed blade knife is 9 1/8" overall. 5 1/8" stainless tanto blade with Chinese dragon etching. Black checkered rubber handle with nickel silver guard and pommel. Black imitation leather belt sheath. Made in China.

This folding pocket knife is 5" closed. 3 1/2" black finish 4034 stainless standard edge assisted opening blade with thumb lug. Blade is etched M&P. Black aluminum handles with black sure grip rubberized inlay. Integrated glass breaker. Pistol style side safety lock. Black finish stainless pocket clip. Made in Taiwan.

This folding pocket knife is 5" closed. 3 1/2" black finish 4034 stainless partially serrated assisted opening blade with thumb lug. Blade is etched M&P. Black finish aluminum handles with black sure grip rubberized inlay. Integrated glass breaker. Pistol style side safety lock. Black finish stainless pocket clip. Made in Taiwan.