Nightstick Lights

Dimensions: 6.1" x 3.5" x 12". Water resistant. Impact resistant. Rechargeable. LED. Black aluminum casing. Multi-angle tilt and swivel fixture design. Includes AC/DC power supplies. Magnetic base for hands-free operation. Adjustable comfort grip handle. Single sealed push button switch. Tempered glass lens. Powder coated. Requires (1) Lithium battery (included). Boxed.

May not ship to Australia. May not ship Post Office. Made in China.

5.5" overall. Water resistant. Impact resistant. Clip. Strobe. CREE LED. Modes: High (100 lumens, 1h 30m runtime); Medium (60 lumens, 3h runtime); Low (30 lumens, 4h 30m runtime). 51m beam distance. Requires (2) AAA batteries (included). Aluminum construction. Color: Black. Clam packed. Made in China.

6" overall. Strobe. Water resistant. Impact resistant. Clip. CREE LED. Modes: High (265 lumens, 2h 30m runtime); Medium (130 lumens, 8h runtime); Low (90 lumens, 18h runtime). 100m beam distance. Requires (2) AA batteries (included). Aluminum construction. Color: Black. Clam packed. Made in China.

Water resistant. Impact resistant. CREE LED. Spotlight (30 lumens), floodlight (15 lumens), and Dual-Light (35 lumens). Black polymer housing. Single switch on top of light. Adjustable ratchet tilt head. Non-slip elastic head strap. 19m beam distance. Requires (3) AAA batteries (included). Clam packed. Made in China.

7" overall. Strobe. Rechargeable. Water resistant. Impact resistant. CREE LED. Black anodized aluminum housing. Single side switch. Adjustable ratchet tilt head. Adjustable elastic head strap. 2 foot USB (Type A) to male micro-USB (Type B) included. Requires (1) Lithium battery (included). Clam packed. Made in China.

Dimensions: 2.5" x 1.1" x 1.2". Strobe. Water resistant. Impact resistant. LED. Ambidextrous rear-facing toggle switches. Momentary or constant-on flashlight. 136m beam distance. Serialized. 550 lumens with 2.5 hour runtime. Includes four modular rail inserts, 2 spare Allen screws, and Allen wrench. Requires (1) CR123A battery (included). Aluminum construction. Color: Black. Boxed with hanging tab. Made in China.

Dimensions: 3.75" x 1.5" x 1.5". Water resistant. Impact resistant. LED. Remote pressure switch. Sharp focused beam for distance illumination. Glass filled nylon polymer toggle switch. 245m beam distance. Serialized. Includes Picatinny rail connector, alcohol pad, adhesive backed Velcro mounting strip, one set cross rail inserts, (4) cross rail mounting cap head screws, and Allen wrench. Requires (2) CR123A batteries (included). Aluminum construction. Color: Black. Boxed with hanging tab. Made in China.

9.5" overall. Strobe. Water resistant. Keychain. Tailcap switch. Rechargeable. CREE LED. Super-bright Xtreme Lumens design. Modes: High (650 lumens, 3h runtime); Medium (300 lumens, 6h runtime); Low (150 lumens, 14h runtime). Deep parabolic reflector. 304m beam distance. Unfocused wide-beam floodlight for close-up illumination. Black glass-filled nylon polymer housing. Serialized. Requires (1) Lithium battery (included). Boxed. Made in China.

Water resistant. Impact resistant. Weapon mountable. Rechargeable. Fits Glock G42, G43, G43X, G48. Green laser. Includes MagMate USB charger. Dual low-profile switches. Programmable trigger lock included. 150 lumens. 45 minute runtime. 104m beam distance. Requires (1) Lithium battery (included). Aluminum construction. Color: Black. Boxed with hanging tab. May not ship Post Office or International. Made in China.

Rechargeable. Water resistant. Impact resistant. Fits GLOCK G26, G27, G33, G39. Green laser. Includes all new MagMate USB charging cable. Dual low-profile switches. Designed for a perfect profile fit. Combination gun lock included. 150 lumens with 45 minute runtime. 104m beam distance. Requires (1) Lithium battery (included). Boxed with hanging tab. Made in China.

Weapon mountable. Rechargeable. Water resistant. Impact resistant. Fits SIG Sauer P365, XL, SAS. Green laser. Includes MagMate USB charger. Dual low-profile switches. Programmable trigger lock included. 150 lumens. 45 minute runtime. 104m beam distance. Requires (1) Lithium battery . Aluminum construction. Color: Black. Boxed with hanging tab. May not ship Post Office or International. Made in China.

Water resistant. Impact resistant. Rechargeable. Fits Springfield Armory Hellcat Series pistols. Green laser. 150 lumens. 45 minute runtime. 104m beam distance. Dual low-profile switches. Ambidextrous toggle switches on each side. Two GFN housings designed to lock onto the front of the pistol's trigger guard for secure installation and low profile. Includes: MagMate USB charging cable and combination gun lock for secure charging, Allen screwdriver for installation and adjustments. Boxed with hanging tab. Made in China.

Water resistant. Impact resistant. Weapon mountable. Rechargeable. Tailcap switch. 1500 lumens. 1 hour, 30 minute runtime. 304m beam distance. Momentary or constant-on operation. Includes: Standard and offset Picatinny mounts, Remote pressure switch, RPS rail mount, Wire management clamp, Battery charger, USB charger cable, Allen wrench, Alcohol prep pad, Velcro, and instruction manual. Requires (2) Lithium batteries (included). Aluminum construction. Color: Black. Boxed with hanging tab. May not ship Post Office or International. Made in China.

2.5" overall. Water resistant. Impact resistant. Weapon mountable. Fits full size and compact handguns. Daylight visible green laser. Battery safe mode. Ambidextrous, intuitive operation. 550 lumens. 2 hour, 30 minute runtime. 136m beam distance. Includes: (5) Rail inserts, (2) Spare screws, Allen wrench, and instruction manual. Requires (2) CR123A batteries (included). Aluminum construction. Color: Black. Boxed with hanging tab. Made in China.

Strobe. Water resistant. Impact resistant. Fits full and compact handguns. Compatible with most existing weapon light holsters. Ambidextrous operation. Safe-mode battery shut-off. 550 max lumens with 2.5 hour max runtime. 136m beam distance. Includes: (5) rail inserts, (6) screws, (1) Allen wrench. Requires (1) CR123A battery (included). Aluminum construction. Color: Black. Boxed with hanging tab. May not ship to Australia. May not ship Post Office. Made in China.

3.5" overall. Water resistant. Strobe. Impact resistant. Mounts to most handguns. 850 max lumens with 1.75 hour runtime. 245m beam distance. Sharp focused beam. Intuitive switches. Momentary and constant-on operation. Includes: (3) inserts, (2) screws, Allen wrench, and instruction manual. Requires (2) CR123A batteries (included). Aluminum construction. Color: Black. Boxed with hanging tab. May not ship to Australia. May not ship Post Office. Made in China.

3" overall. Water resistant. Impact resistant. 850 max lumens. 1.45 hour max runtime. 245m beam distance. Mounts to any Picatinny rail. Single switch control. Includes: (2) screws, (3) inserts, Allen wrench, and instruction manual. Requires (2) CR123A batteries (included). Aluminum construction. Color: Black. Boxed with hanging tab. May not ship to Australia. May not ship Post Office. Made in China.

2.75" overall. Water resistant. Impact resistant. Weapon mountable. 550 lumens. 2.5 hour runtime. 136m beam distance. Mounts to any Picatinny rail. Safety mode. Momentary and constant-on operation. Requires (1) CR123A battery (included). Aluminum construction. Color: Black. Boxed with hanging tab. May not ship Post Office or International. Made in China.

The Heavy-Weighted Magnetic Base fits the 1060, 1160, 1170, 1180 and 1260 series LED lights. It's design includes a padded magnet so that it can be attached to any metal surface either horizontally or vertically. The padded magnet will protect the metal's finish. Made in China.

The Magnetic Clip fits around the body of the 1000, 1100 and 1200 series Multi-Purpose LED Lights. It can be positioned anywhere along the length of the light and allows the light to be rotated within the clip. The powerful magnet will support the light any position. Made in USA.

The Safety Cone fits the 1060, 1160, 1170, 1180 and 1260 series LED Lights. Fits over the flashlight/spotlight and turns it into a safety light for a multitude of uses including traffic direction and roadside hazards. Ideal for night time use. Available in red or yellow. Made in China.

The Safety Cone fits the 1060, 1160, 1170, 1180 and 1260 series LED Lights. Fits over the flashlight/spotlight and turns it into a safety light for a multitude of uses including traffic direction and roadside hazards. Ideal for night time use. Available in red or yellow. Made in China.

This replacement lens fits the NSR-2168B and NSR-2168R Multi-Purpose LED Work Lights and includes a new magnetic hanging hook. Made in China.

This nesting safety cone is designed to fit the Nightstick USB-558XL and USB-588XL tactical flashlights. By placing this cone over the flashlight end, the now illuminated cone can be used to direct traffic and illuminate roadside hazards. Ideal for nighttime use. When not in use, the cone can be removed and the flashlight nested inside for storage. Made in Indonesia.

This nesting safety cone is designed to fit the Nightstick USB-558XL and USB-588XL tactical flashlights. By placing this cone over the flashlight end, the now illuminated cone can be used to direct traffic and illuminate roadside hazards. Ideal for nighttime use. When not in use, the cone can be removed and the flashlight nested inside for storage. Made in Indonesia.

The LGL-160 Long Gun Light Kit is a complete weapon lighting system for your rifle, carbine, or shotgun. Made of 6061-T6 aluminum and hard anodized black, it features a super-bright LED rated at 1100 lumens with a 2-hour runtime. Designed around a high-efficiency deep parabolic reflector, the LGL-160's tightly focused beam reaches out to 300 meters. The light comes installed with a standard tail-cap switch and reversible thumb-screw Picatinny mount. It can alternatively be mounted with the included offset Picatinny mount, providing flexible options to clear front sights and other mounted equipment while allowing easy support hand activation. Both the tail-cap switch as well as the included 6'' remote pressure pad/switch feature momentary or constant-on modes. The kit also includes an RPS Picatinny rail mount and Nightstick-exclusive wire management rail clamp to prevent cable snags. Made in China.

The LGL-180-IR long gun light with IR illuminator is a dual-wavelength weapon lighting system for your rifle, carbine, or shotgun. A hybrid dual reflector with two dedicated LEDs (IR and VIS) means each beam is optimally focused for ultra-high intensity and maximum distance. The 180-IR projects 1100 lumens of visible white light out to 229 meters for 2 hours, while a separate 1400mw 940nm IR illuminator beam provides a similar range and runtime during night vision use. A rotating collar on the bezel allows the user to select visible (VIS) or infrared (IR) modes, or OFF. The light comes installed with a standard tail cap switch and reversible thumbscrew Picatinny mount. It can alternatively be mounted with the included offset Picatinny mount, providing flexible options to clear front sights and other mounted equipment while allowing easy support hand activation. Both the tail cap switch as well as the included 6'' remote pressure pad/switch feature momentary or constant-on modes. The kit also includes an RPS Picatinny rail mount and Nightstick-exclusive wire management rail clamp to prevent cable snags. The 180-IR weapon light kit includes (2) CR123 batteries. As a bonus, the multi-fuel 180-IR also runs on a single 18650 lithium-ion battery. Made in China.

This non-rechargeable Mini-TAC light use an LED and has a deep parabolic reflector creating a tight, long throw beam for distance illumination. With a water resistant design, it is constructed from aircraft-grade 6061-T6 aluminum with a Type II hard anodized finish. The tail switch provides momentary or constant-on functionality. The light comes with a removable pocket clip. The MT-100 is powered by two included AAA batteries. Made in China.

This non-rechargeable Mini-TAC light use a CREE LED and has a deep parabolic reflector creating a tight, long throw beam for distance illumination. With a water resistant design, it is constructed from aircraft-grade 6061-T6 aluminum with a Type II hard anodized finish. The tail switch provides momentary or constant-on functionality.  The light comes with a removable pocket clip and a removable wrist lanyard.  The MT-110 is powered by one included AA battery. Made in China.

This non-rechargeable Mini-TAC light use an LED and has a deep parabolic reflector creating a tight, long throw beam for distance illumination. With a water resistant design, it is constructed from aircraft-grade 6061-T6 aluminum with a Type II hard anodized finish. The tail switch provides momentary or constant-on functionality.  The light comes with a removable pocket clip and a removable wrist lanyard. The MT-120 is powered by two included AA batteries. Made in China.

This non-rechargeable Mini-TAC Pro light uses an LED and has a deep parabolic reflector creating a tight, long throw beam for distance illumination. With a waterproof design, it is constructed from aircraft-grade 6061-T6 aluminum with a Type III hard anodized finish. The tail switch provides momentary or constant-on functionality, a set of user-selectable high, medium or low-brightness settings as well as a disorienting strobe. This light is 150 lumens with a run time up to 4 hours. The light comes with a removable pocket clip and is powered by two included AAA batteries. Made in China.

This non-rechargeable Mini-TAC UV light uses an Ultraviolet LED rated at 365 Nanometers for the purpose of detecting hidden security markings in documents, spotting leak detection fluids and as an aid in visually locating proteins in forensics work.  With a water resistant design, it is constructed from aircraft-grade 6061-T6 aluminum with a Type II hard anodized finish. The tail switch provides momentary or constant-on functionality.  The light comes with a removable pocket clip.  The MTU-106 is powered by two included AAA batteries. Made in China.

The Safety Light combines a full-size flashlight and a flood/flashing safety light in an all LED compact light-weight package. Two body mounted push buttons control the lighting functions. The top button powers the tight-beam, long-throw 150 lumens flashlight in either momentary or constant-on mode. The bottom button controls the safety light. Pressing the bottom button once, turns on both sets of the safety lights at full-power. Pressing the button a second time, causes the safety lights to alternately strobe between the two colors. For added utility, there's a removable magnetic clip and lanyard ring included with each light. Powered by 4 AA batteries (included). This safety light / flashlight is the perfect choice when directing traffic or marking a hazardous area. Made in China.

Model NSP-1170-K01 Safety Light Combo Kit includes the Nighstick NSP-1170 Safety Light, the Heavy Weighted Magnetic Base and the Red Safety Cone into a single package. The Model 1170 Safety Light combines a full-size flashlight and a flood/flashing safety light in an all LED compact light-weight package. Two body mounted push buttons control the lighting functions. The top button powers the tight-beam, long-throw 150 lumens flashlight in either momentary or constant-on mode. The bottom button controls the safety light. Pressing the bottom button once, turns on the RED/BLUE safety lights at full-power. Pressing the button a second time causes the RED/BLUE safety lights to alternate flash. 4 AA batteries (included). For added utility, there's a removable magnetic clip and lanyard ring included with each light. The Heavy Weighted Magnetic Base makes it possible to stand the light up on its own, or attach the light magnetically to any metal object, while the Red Safety Cone turns the 1170 into the perfect tool for directing traffic. Made in China.

The Safety Light combines a full-size flashlight and a flood/flashing safety light in an all LED compact light-weight package. Two body mounted push buttons control the lighting functions. The top button powers the tight-beam, long-throw 150 lumens flashlight in either momentary or constant-on mode. The bottom button controls the safety light. Pressing the bottom button once, turns on both sets of the safety lights at full-power. Pressing the button a second time, causes the safety lights to alternately strobe between the two colors. For added utility, there's a removable magnetic clip and lanyard ring included with each light. Powered by 4 AA batteries (included). This safety light / flashlight is the perfect choice when directing traffic or marking a hazardous area. Made in China.

The Model 1174 Safety Light Combo Kit includes the Model 1174 Safety Light, the Heavy Weighted Magnetic Base and the Red Safety Cone into a single package. The Model 1174 Safety Light combines a full-size flashlight and a flood/flashing safety light in an all LED compact light-weight package. Two body mounted push buttons control the lighting functions. The top button powers the tight-beam, long-throw 150 lumens flashlight in either momentary or constant-on mode. The bottom button controls the safety light. Pressing the bottom button once, turns on the WHITE safety lights at full-power. Pressing the button a second time, turns off the WHITE safety lights and causes the AMBER safety lights to strobe. Powered by 4 AA batteries (included). For added utility, there's a removable magnetic clip and lanyard ring included with each light. The Heavy Weighted Magnetic Base makes it possible to stand the light up on its own, or attach the light magnetically to any metal object, while the Red Safety Cone turns the 1174 into the perfect tool for directing traffic or marking a hazardous area. Made in China.

The Model 1632 LED Red Traffic Wand features a bright lumen output with a red cone and a black-formed handle for ultimate grip and comfort. Body mounted push button controls the on/strobe/off lighting functions. Pressing the button once, turns the light on constant-on mode, pressing the button a second time causes the light to strobe, and a third press of the button turns the light off. Power comes from 3 premium AAA batteries (included). This lightweight nightstick is ideal for day or night applications and is the perfect choice for air ground crews, directing traffic, or marking a potentially hazardous area. Made in China.

The Model 1632 LED Red Traffic Wand features a bright lumen output with a red cone and a black-formed handle for ultimate grip and comfort. Body mounted push button controls the on/strobe/off lighting functions. Pressing the button once, turns the light on constant-on mode, pressing the button a second time causes the light to strobe, and a third press of the button turns the light off. Power comes from 3 premium AAA batteries (included). This lightweight nightstick is ideal for day or night applications and is the perfect choice for air ground crews, directing traffic, or marking a potentially hazardous area. Made in China.

This Dual-Light Flashlight uses an LED rated at 300 lumens paired with a high-efficiency deep parabolic reflector, creating a flashlight beam with an effective range of 201 meters. Additionally, built into the handle is a 200 lumen floodlight. Unlike the flashlight beam, the floodlight does not have a reflector so the light spreads out in a wide, even, unfocused pattern of light...perfect for lighting up things that are close. Additionally, both the flashlight and the floodlight can be turned on at the same time for even more versatile lighting options. The waterproof design, in combination with a PC/ABS chemical, heat, and impact resistant housing, make this product a great value. Additionally, the integrated magnets, located in the base of the handle and the pocket clip, provide for almost limitless hands-free usage. Powered by 3 AA batteries (included). Made in China.

This Dual-Light Flashlight uses an LED rated at 300 lumens paired with a high-efficiency deep parabolic reflector, creating a flashlight beam with an effective range of 201 meters. Additionally, built into the handle is a 200 lumen floodlight. Unlike the flashlight beam, the floodlight does not have a reflector so the light spreads out in a wide, even, unfocused pattern of light...perfect for lighting up things that are close. Additionally, both the flashlight and the floodlight can be turned on at the same time for even more versatile lighting options. The waterproof design, in combination with a PC/ABS chemical, heat, and impact resistant housing, make this product a great value. Additionally, the integrated magnets, located in the base of the handle and the pocket clip, provide for almost limitless hands-free usage. Powered by 3 AA batteries (included). Made in China.

The NSP-410 Adjustable Beam Flashlight uses a CREE LED rated at 115 lumens that works in conjunction with a TIR lens to create a usable beam distance of 72 meters. This compact flashlight features both momentary and constant-on functionality and has a rotating bezel ring that allows the user to adjust the focus of the beam. The housing and tail-cap are made from aircraft-grade 6061-T6 aluminum and have a Type III hard anodized finish. Power comes from a single AA battery (included). Made in China.

The NSP-420 Adjustable Beam Multi-Function Flashlight uses an LED rated at 275 lumens that works in conjunction with a TIR lens to create a usable beam distance of 133 meters. This compact flashlight features momentary or constant-on functionality, user-selectable high, medium or low-brightness settings and a rotating bezel ring that allows the user to adjust the focus of the beam. The housing and tail-cap are made from aircraft-grade 6061-T6 aluminum and have a Type III hard anodized finish. Power comes from 3 AAA batteries (included). Made in China.

The NSP-430 Adjustable Beam Flashlight uses an LED rated at 275 lumens that works in conjunction with a TIR lens to create a usable beam distance of 109 meters. This compact flashlight features either momentary or constant-on functionality and has a rotating bezel ring that allows the user to adjust the focus of the beam. The housing and tail-cap are made from aircraft-grade 6061-T6 aluminum and have a Type III hard anodized finish. Power comes from 2 AA batteries (included). Includes nylon belt holster. Made in China.

This Dual-Light Multi-function Headlamp features a multi-position tilt head design and includes an elastic head strap with a non-slip lining. Utilizing Nightstick's exclusive Dual-Light design, this headlamp combines a tight-beam long-throw spotlight, with a wide-beam close area floodlight. Rated at 100 & 60 lumens respectively, the high and low-brightness spotlight beams on this headlamp are designed for distance illumination. This headlamp also has two wide-beam floodlight settings rated at 180 & 100 lumens. The floodlight spreads out in a wide even pattern of light expressly for the purpose of providing illumination of areas that are close by. Additionally any combination of spotlight & floodlight settings can be selected simultaneously for even greater functionality. The top mounted dual switches provide high/low-brightness spotlight and high/low-brightness floodlight. Made in China.

This 3 AAA Dual-Light Headlamp w/Hard Hat Clip & Mount features a multi-position tilt head design and includes an integrated Stainless Clip and adhesive hard hat mounting bracket for hands-free operation. Utilizing Nightstick's exclusive Dual-Light design, this headlamp combines a tight-beam long-throw spotlight, with a wide-beam close area floodlight. Rated at 100 & 60 lumens respectively, the high and low-brightness spotlight beams on this headlamp are designed for distance illumination. This headlamp also has two wide-beam floodlight settings rated at 180 & 100 lumens. The floodlight spreads out in a wide even pattern of light expressly for the purpose of providing illumination of areas that are close by. Additionally any combination of spotlight & floodlight settings can be selected simultaneously for even greater functionality. The top mounted dual switches provide high/low-brightness spotlight and high/low-brightness floodlight. Made in China.

This intrinsically safe, helmet-mounted, multi-function flashlight is the most versatile choice for hands-free lighting. This light outshines the competition with its powerful 360 lumen tightly focused flashlight and a beam distance rating of 218 meters (715 feet). Choose a lower 180 lumen setting for increased runtime or the 30 lumen survival mode for 30 hours. Fits on any fire helmet (or side-brim hard hat) regardless of whether it has an up-turned or down-turned brim thanks to the multi-angle mount. This feature makes it possible to not only avoid goggles, face shields, and other helmet-worn gear but also to place the light exactly where its needed. The XPP-5465 is IP-X7 rated waterproof and meets the requirement for NFPA-1971-8.6 (2013). Powered by 2 CR123 batteries (included). Not compatible with rechargeable batteries. Made in China.

The NSP-4650B Helmet-mounted Multi-Function Dual-Light Flashlight is the most versatile choice for helmet-mounted hands-free lighting. The 4650 outshines the competition with its powerful 220 lumen tightly-focused Flashlight and a beam distance rating of 183 meters (600 feet). The user can choose from two additional lower lumen settings at 100 or 30 lumens for the ability to dial-in just the right amount of concentrated light. But the 4650's lighting options don't stop there. Located just below the Flashlight and perfectly angled at 45 degrees to the flashlight, is a user-selectable brightness Floodlight. Since Floodlights don't have a reflector, the light pattern doesn't have a bright center spot, instead the Floodlight's soft unfocused light pattern is perfect for lighting up nearby objects. Reading the gauge on a respirator, inspecting or working on things within arm's reach and illuminating the ground as the user walks are now possible thanks to the integrated Floodlight. Brightness settings for the floodlight give the user the choice of 100 or 50 Lumens for typical use, as well as a Survival mode at 15 lumens for emergency situations when having less light that runs for 60+ hours might just make the difference. Additionally, in Dual-Light mode (both the Flashlight and the Floodlight turned on at the same time) the user can light up the distance and the ground at the same time for maximum versatility and user safety. The 4650 also has a green, rear facing LED light so that others can easily identify team personnel in smoke-filled or dusty environments. The 4650 will fit on any Fire Helmet (or side-brim hard hat) regardless of whether it has an up-turned or down-turned brim thanks to the multi-angle adjustment feature that allows the user to fine tune the exact position and angle of the light. This feature makes it possible to not only avoid goggles, face shields and other helmet-worn gear, but also place the light exactly where it's needed. The 4650 is IP-X7 rated water proof and meets the requirement for NFPA-1971-8.6 (2013). Power comes from 2 included CR-123 batteries. Made in China.

The product features a rechargeable Li-ion battery and multi-angle tilt and swivel fixture design. It has high/low brightness modes with LED technology and includes AC and DC power supplies. The magnetic base allows hands-free use, while the adjustable handle and powder-coated finish ensure durability. Made in China.

The product features a rechargeable Li-ion battery and multi-angle tilt and swivel fixture design. It has high/low brightness modes with LED technology and includes AC and DC power supplies. The magnetic base allows hands-free use, while the adjustable handle and powder-coated finish ensure durability. Made in China.

The Nightstick Xtreme Lumens Rechargeable Multi-Purpose LED Work Light is all about super-bright hands-free lighting. The floodlight has two brightness modes, high at 600 lumens and low at 225. The single push button body switch located on the handle controls all lighting modes. It has three heavy-duty magnets built into the light, one at the tip one at the mid-point of the body and one built into the base for multiple hands-free uses. The flat-bottom design of the handle means the light will stand up on most flat surfaces, and the octagonal shape to the handle keeps the floodlight aimed in the correct direction when you lay the light on its side. Further adding to the work light's hands-free features is the detachable magnetic hook. It can be attached to either the body or tip magnets and can be rotated 360 degrees for even more hands-free versatility. The integrated Lithium-ion battery can be recharged with the included AC or DC power supply/charger. Made in China.

The Nightstick Xtreme Lumens Rechargeable Multi-Purpose LED Work Light is all about super-bright hands-free lighting. The floodlight has two brightness modes, high at 600 lumens and low at 225. The single push button body switch located on the handle controls all lighting modes. It has three heavy-duty magnets built into the light, one at the tip one at the mid-point of the body and one built into the base for multiple hands-free uses. The flat-bottom design of the handle means the light will stand up on most flat surfaces, and the octagonal shape to the handle keeps the floodlight aimed in the correct direction when you lay the light on its side. Further adding to the work light's hands-free features is the detachable magnetic hook. It can be attached to either the body or tip magnets and can be rotated 360 degrees for even more hands-free versatility. The integrated Lithium-ion battery can be recharged with the included AC or DC power supply/charger. Made in China.

This duty/personal-size rechargeable metal multi-function Xtreme Lumens Dual-Light Flashlight uses an LED rated at 650 lumens that works in conjunction with a high-efficiency deep parabolic reflector to create a usable beam rated at 275 meters. A 200 lumens unfocused floodlight is integrated in to the housing which is perfect for close-up illumination. Additionally both the flashlight (any brightness mode) and the floodlight can be turned on at the same time for maximum safety and versatility. The flashlight body and tail switches provide momentary or constant-on functionality, a set of user-selectable high, medium or low-brightness settings as well as a disorienting strobe. Both flashlight switches operate in tandem with each other. The second body switch operates the floodlight. The housing, tail-cap and bezel are made from aircraft-grade 6061-T6 aluminum with a Type III hard anodized finish. Power comes from a rechargeable Lithium-ion battery. Made in China.

Clamp helps secure the cable on remote pressure switch-enabled weapon lights from snag hazards. Made from glass-filled nylon and a stainless steel cross slot bolt, the NS-WM1's molded channel underside allows the user to route the Remote Pressure Switch (RPS) cable straight through or perpendicular to the entry point for maximum flexibility. Package contains two clamps and Allen wrench. Made in China.

The SFL-11WL shotgun forend weapon light is a complete forend replacement for your 12 gauge Mossberg 500/590/590A1 or Shockwave pump-action shotgun. Built from a one-piece body of heavy-duty glass-filled nylon with an over-molded rubber grip area, it features a super-bright LED rated at 1200 lumens with an hour and a half runtime. Designed around a high-efficiency deep parabolic reflector, the tightly focused beam has a 203-meter beam distance. The SFL forend features ambidextrous switches positioned intuitively towards the front for easy activation. Both buttons are surrounded by a small raised bump guard that helps prevent accidental activation while racking the action or laying it on its side. The light also features an ergonomic palm swell design to improve grip during light activation and weapon manipulation under stress. Each SFL comes with an optional hand stop/safety strap and Nightstick's SFL action tube nut wrench for removal of factory-installed castle nut and pump handle fore-end. Comes with two CR123 batteries, but can be upgraded to li-ion rechargeable with optional 18650-KIT. Limited lifetime warranty. Made in China.

The SFL-12GL shotgun forend weapon light in less-lethan orange is a complete forend replacement for your 12 gauge Mossberg 500/590/590A1 or Shockwave pump-action shotgun. Built from a one-piece body of heavy-duty glass-filled nylon with an over-molded rubber grip area, it features a super-bright LED rated at 1200 lumens with an hour and a half runtime. Designed around a high-efficiency deep parabolic reflector, the tightly focused beam has a 203-meter beam distance. The SFL forend features ambidextrous switches positioned intuitively towards the front for easy activation. Both buttons are surrounded by a small raised bump guard that helps prevent accidental activation while racking the action or laying it on its side. The light also features an ergonomic palm swell design to improve grip during light activation and weapon manipulation under stress. Each SFL comes with an optional hand stop/safety strap and Nightstick's SFL action tube nut wrench for removal of factory-installed castle nut and pump handle fore-end. Comes with two CR123 batteries, but can be upgraded to li-ion rechargeable with optional 18650-KIT. Limited lifetime warranty. Made in China.

The SFL-12WL shotgun forend weapon light in less-lethal orange is a complete forend replacement for your 12 gauge Mossberg 500/590/590A1 or Shockwave pump-action shotgun. Built from a one-piece body of heavy-duty glass-filled nylon with an over-molded rubber grip area, it features a super-bright LED rated at 1200 lumens with an hour and a half runtime. Designed around a high-efficiency deep parabolic reflector, the tightly focused beam has a 203-meter beam distance. The SFL forend features ambidextrous switches positioned intuitively towards the front for easy activation. Both buttons are surrounded by a small raised bump guard that helps prevent accidental activation while racking the action or laying it on its side. The light also features an ergonomic palm swell design to improve grip during light activation and weapon manipulation under stress. Each SFL comes with an optional hand stop/safety strap and Nightstick's SFL action tube nut wrench for removal of factory-installed castle nut and pump handle fore-end. Comes with two CR123 batteries, but can be upgraded to li-ion rechargeable with optional 18650-KIT. Limited lifetime warranty. Made in China.

The SFL-13GL shotgun forend weapon light with green laser is a complete forend replacement for your 12 gauge Remington 870 and TAC-14 pump-action shotgun. Built from a one-piece body of heavy-duty glass-filled nylon with an over-molded rubber grip area, it features a super-bright LED rated at 1200 lumens with an hour and a half runtime. Designed around a high-efficiency deep parabolic reflector, the tightly focused beam has a 203-meter beam distance. The SFL forend features ambidextrous switches positioned intuitively towards the front for easy activation. Both buttons are surrounded by a small raised bump guard that helps prevent accidental activation while racking the action or laying it on its side. The light also features an ergonomic palm swell design to improve grip during light activation and weapon manipulation under stress. Each SFL comes with an optional hand stop/safety strap and Nightstick's SFL action tube nut wrench for removal of factory-installed castle nut and pump handle fore-end. Comes with two CR123 batteries, but can be upgraded to li-ion rechargeable with optional 18650-KIT. Limited lifetime warranty. Made in China.

The SFL-13WL shotgun forend weapon light is a complete forend replacement for your 12 gauge Remington 870 or TAC-14 pump-action shotgun. Built from a one-piece body of heavy-duty glass-filled nylon with an over-molded rubber grip area, it features a super-bright LED rated at 1200 lumens with an hour and a half runtime. Designed around a high-efficiency deep parabolic reflector, the tightly focused beam has a 203-meter beam distance. The SFL forend features ambidextrous switches positioned intuitively towards the front for easy activation. Both buttons are surrounded by a small raised bump guard that helps prevent accidental activation while racking the action or laying it on its side. The light also features an ergonomic palm swell design to improve grip during light activation and weapon manipulation under stress. Each SFL comes with an optional hand stop/safety strap and Nightstick's SFL action tube nut wrench for removal of factory-installed castle nut and pump handle fore-end. Comes with two CR123 batteries, but can be upgraded to li-ion rechargeable with optional 18650-KIT. Limited lifetime warranty. Made in China.

The SFL-14GL shotgun forend weapon light with green laser in less-lethal orange is a complete forend replacement for your 12 gauge Remington 870 and TAC-14 pump-action shotgun. Built from a one-piece body of heavy-duty glass-filled nylon with an over-molded rubber grip area, it features a super-bright LED rated at 1200 lumens with an hour and a half runtime. Designed around a high-efficiency deep parabolic reflector, the tightly focused beam has a 203-meter beam distance. The SFL forend features ambidextrous switches positioned intuitively towards the front for easy activation. Both buttons are surrounded by a small raised bump guard that helps prevent accidental activation while racking the action or laying it on its side. The light also features an ergonomic palm swell design to improve grip during light activation and weapon manipulation under stress. Each SFL comes with an optional hand stop/safety strap and Nightstick's SFL action tube nut wrench for removal of factory-installed castle nut and pump handle fore-end. Comes with two CR123 batteries, but can be upgraded to li-ion rechargeable with optional 18650-KIT. Limited lifetime warranty. Made in China.

The SFL-14WL shotgun forend weapon light in less-lethal orange is a complete forend replacement for your 12 gauge Remington 870 or TAC-14 pump-action shotgun. Built from a one-piece body of heavy-duty glass-filled nylon with an over-molded rubber grip area, it features a super-bright LED rated at 1200 lumens with an hour and a half runtime. Designed around a high-efficiency deep parabolic reflector, the tightly focused beam has a 203-meter beam distance. The SFL forend features ambidextrous switches positioned intuitively towards the front for easy activation. Both buttons are surrounded by a small raised bump guard that helps prevent accidental activation while racking the action or laying it on its side. The light also features an ergonomic palm swell design to improve grip during light activation and weapon manipulation under stress. Each SFL comes with an optional hand stop/safety strap and Nightstick's SFL action tube nut wrench for removal of factory-installed castle nut and pump handle fore-end. Comes with two CR123 batteries, but can be upgraded to li-ion rechargeable with optional 18650-KIT. Limited lifetime warranty. Made in China.

The Nightstick TAC-300 is 2 CR123 LED Tactical Polymer Flashlight that outperforms most other lights that cost twice as much. With a CREE LED rated at 180 lumens and its high-efficiency deep parabolic reflector, the TAC-300s beam has an effective range of 190 meters (over 620 feet). Its waterproof design in combination with its impact and chemical resistant glass-filled nylon polymer housing, make the TAC-300 one of the toughest tactical lights around. The large tail-cap switch provides momentary or constant-on light operations. Running on a pair of included CR123 Lithium batteries, the TAC-300 is rated at 3 hours of run-time. Made in China.

This compact, rechargeable, polymer tactical flashlight uses a CREE LED rated at 800 lumens that works in conjunction with a high-efficiency, deep parabolic reflector to create a usable beam rated at 205 meters. The tail-cap switch provides momentary or constant-on functionality. The housing is made from glass-filled nylon polymer. Power comes from a rechargeable lithium-ion battery and includes the ability to run from a pair of CR-123 batteries (not included) thanks to the CR-123 battery carrier (included). Made in China.

This compact, rechargeable, multi-function tactical flashlight uses a CREE LED rated at 800 lumens that works in conjunction with a high-efficiency deep parabolic reflector to create a usable beam rated at 205 meters. The tail-cap switch provides momentary or constant-on functionality, a set of user-selectable high, medium or low-brightness settings as well as a disorienting strobe. The housing is made from glass-filled nylon polymer. Power comes from a rechargeable lithium-ion battery and includes the ability to run from a pair of CR-123 batteries (not included) thanks to the CR-123 battery carrier (included). Includes AC/DC power supply/charger. Made in China.

This compact recharge-compatible multi-function metal Xtreme Lumens tactical flashlight uses an LED rated at 800 lumens that works in conjunction with a high-efficiency deep parabolic reflector to create a usable beam rated at 205 meters.  The tail-cap switch provides momentary or constant-on functionality, a set of user-selectable high, medium or low-brightness settings as well as a disorienting strobe.  Power comes from a pair of CR-123 batteries (included) installed into the CR-123 battery carrier (included).  The housing and tail-cap are made from aircraft-grade 6061-T6 aluminum and have a Type III hard anodized finish.  This light can be upgraded to a rechargeable model by adding the optional rechargeable lithium-ion battery, charger, and power cords. Made in China.

This compact, rechargeable, multi-function, metal tactical flashlight uses an LED rated at 800 lumens that works in conjunction with a high-efficiency deep parabolic reflector to create a usable beam rated at 205 meters. The tail-cap switch provides momentary or constant-on functionality, a set of user-selectable high, medium or low-brightness settings as well as a disorienting strobe. The housing and tail-cap are made from aircraft-grade 6061-T6 aluminum and have a Type III hard anodized finish. Power comes from a rechargeable lithium-ion battery and includes the ability to run from a pair of CR-123 batteries (not included) thanks to the CR-123 battery carrier (included). Made in China.

This compact dual-switch rechargeable tactical flashlight uses an 1100 lumen LED that works in conjunction with a high-efficiency deep parabolic reflector to create a usable beam rated at 228 meters. Both the bezel and tail-cap switches provide momentary or constant-on functionality. The light is made from aircraft-grade 6061-T6 aluminum with a Type III hard-anodized finish. A rapid drop-in charger is included. Power comes from a rechargeable Lithium-ion battery and includes the ability to run from a pair of CR123 batteries (batteries not included) thanks to the CR123 Battery Carrier (included). Not compatible with rechargeable CR123-style batteries. Made in China.

The TCM-10 features completely ambidextrous and intuitive rear-facing toggle switches on each side of the light to operate the momentary-on and constant-on lighting modes, as well as the three operational modes (light, laser, or light & laser). A user-programmable strobe mode and battery-safe mode are available when needed. Constructed from aircraft-grade 6061-T6 aluminum with a polymer rear housing, the light includes four handgun-specific modular rail inserts (pre-configured with C1 insert for Glock pistols), two spare Allen screws, an Allen wrench, and one CR123 Lithium battery. Made in China.

The TCM-10-GL Compact Weapon-Mounted Light w/Green Laser produces 650 lumens from a single CR123 battery. An engineered TIR lens projects a tight bright spot for threat identification and confirmation that reaches 136 meters. The lens also produces a crisply defined outer halo for additional situational feedback. A daylight-visible green aiming laser provides added peace of mind. The TCM-10 features completely ambidextrous and intuitive rear-facing toggle switches on each side of the light to operate the momentary-on and constant-on lighting modes, as well as the three operational modes (light, laser, or light & laser). A user-programmable strobe mode and battery-safe mode are available when needed. Constructed from aircraft-grade 6061-T6 aluminum with a polymer rear housing, the light includes five handgun-specific modular rail inserts (pre-configured with C1 insert for Glock pistols), two spare Allen screws, an Allen wrench, and one CR123 Lithium battery. Made in China.

The TCM-5B-GL Subcompact Weapon-Mounted Light with Green Laser for Short Rail handguns produces 650 lumens from a single CR123 battery. Its unique rail clamp is designed specifically for narrow-rail / short-rail subcompact pistols. An engineered TIR lens projects a tight bright spot for threat identification and confirmation that reaches 136 meters. The lens also produces a crisply defined outer halo for additional situational feedback. A 520nm green laser aids in aiming confirmation in both bright outdoor as well as interior spaces.

The TSM-14G Subcompact Tactical Weapon-Mounted Light with Green Laser for Glock G43X MOS and G48 MOS pistols uses a super-bright LED rated at 150 lumens working in conjunction with a precision-engineered miniature reflector to create a bright white beam of light rated at 100 meters. This weapon light features completely ambidextrous and intuitive toggle switches on each side of the light to operate the momentary-on and constant-on lighting modes or Class IIIa 532nm daylight-visible green laser. These lighting modes include white light, laser, or both light and laser. The two glass-filled nylon plastic housings of the TSM-11G is designed to lock onto the front of the pistol's trigger guard for secure installation and the lowest profile possible. The weapon light includes a Nightstick MagMate USB magnetically coupled charger, a combination gun lock for secure charging, and an Allen screwdriver for installation and laser aim adjustments.

The TSM-15G Subcompact Tactical Weapon-Mounted Light with Green Laser for Smith & Wesson M&P Shield 9/.40 pistols uses a super-bright LED rated at 150 lumens working in conjunction with a precision-engineered miniature reflector to create a bright white beam of light rated at 100 meters. This weapon light features completely ambidextrous and intuitive toggle switches on each side of the light to operate the momentary-on and constant-on lighting modes or Class IIIa 532nm daylight-visible green laser. These lighting modes include white light, laser, or both light and laser. The two glass-filled nylon plastic housings of the TSM-15G is designed to lock onto the front of the pistol's trigger guard for secure installation and the lowest profile possible. The weapon light includes a USB magnetically coupled charger, a combination gun lock for secure charging, and an Allen screwdriver for installation and laser aim adjustments.

The TWM-350 Tactical Weapon-Mounted Light uses a CREE LED rated 350 lumens working in conjunction with a high-efficiency deep parabolic reflector to create a usable beam of light rated at 215 meters. This weapon light features a unique and completely ambidextrous toggle switch on each side of the light to operate the momentary-on and constant-on lighting modes. The housing of the TWM-350 is constructed from aircraft-grade 6061-T6 aluminum with a glass-filled nylon polymer battery door and toggle switch. Includes 4 Sets of Cross-Rail Inserts (2 inserts each to fit GLOCK, 1913, TSW/99, 90two), 4 Cross-Rail Mounting Cap Head Screws, Allen Wrench, and 2 CR123 Lithium batteries. Made in China.

The USB-320 USB Rechargeable Every-Day-Carry (EDC) metal flashlight uses a CREE LED rated at 320 lumens for 1.5 hours. At only 4.5 inches long and weighing only 3 oz, this compact flashlight includes a removeable deep concealment clip for ease of use in and out of a pocket. With both momentary or constant-on functionality, the USB-320 features an IP-X7 rated waterproof housing with sleeved collar that discretely opens for direct USB charging turning from red to green when fully charged. Meeting the requirements of NFPA-1971-8.6 (2013), the USB-320 is also chemical, heat and impact resistant, and includes a 2 foot USB charging cable and lithium-ion rechargeable battery. Made in China.

The Nightstick Multi-Flood Headlamp is designed to be a lightweight area flood light with white, green, or red light. The light can be worn alone with the included strap or attached to the brim of a ball cap with the adjustable clip. This waterproof headlamp is manufactured from rugged engineered polymer and features a multi-color LED. In white light mode, the headlamp is rated at 250 Lumens for 7 hours in high mode and 60 Lumens for up to 35 hours while in low. The red and green light modes run for over 12 hours. The front-mounted dual switches provide quick access to the different light modes for easy, intuitive operation. With a built-in charge indicator and included USB-C charging cable, the integrated LiPo battery supplies power. Made in China.

The Nightstick Multi-Flood Headlamp is designed to be a lightweight area flood light with white, green, or red light. The light can be worn alone with the included strap or attached to the brim of a ball cap with the adjustable clip. This waterproof headlamp is manufactured from rugged engineered polymer and features a multi-color LED. In white light mode, the headlamp is rated at 250 Lumens for 7 hours in high mode and 60 Lumens for up to 35 hours while in low. The red and green light modes run for over 12 hours. The front-mounted dual switches provide quick access to the different light modes for easy, intuitive operation. With a built-in charge indicator and included USB-C charging cable, the integrated LiPo battery supplies power. Made in China.

The USB-558XL USB Rechargeable Tactical Flashlight uses a CREE LED rated at 900 lumens on high for 2 hours but can be extended up to 16.75 hours in low mode at 100 lumens. At only 5.9'' long, and weighing only 5.7 oz, this metal tactical flashlight is multi-functional, cycling between high, medium, and low modes with an optional strobe when you press twice in succession. The USB-558XL is rated IP-X7 waterproof and features a discretely sleeved collar that opens for direct USB charging. The built-in charging indicator turns from red to green when fully charged. Included is a 2 foot USB charging cable, lithium-ion rechargeable battery and CR123 battery carrier (batteries not included) for added convenience. Made in China.

The USB-558XL USB Rechargeable Tactical Flashlight uses a CREE LED rated at 900 lumens on high for 2 hours but can be extended up to 16.75 hours in low mode at 100 lumens. At only 5.9'' long, and weighing only 5.7 oz, this metal tactical flashlight is multi-functional, cycling between high, medium, and low modes with an optional strobe when you press twice in succession. The USB-558XL is rated IP-X7 waterproof and features a discretely sleeved collar that opens for direct USB charging. The built-in charging indicator turns from red to green when fully charged. Included is a 2 foot USB charging cable, lithium-ion rechargeable battery and CR123 battery carrier (batteries not included) for added convenience. Made in China.

The USB-578XL USB Dual-Light Tactical Flashlight uses an LED rated at 900 lumens on high for 3 hours but can be extended up to 22 hours in low mode (150 lumens). At only 5.8 inches long and weighing only 6.9 oz, this metal tactical flashlight is multi-functional, cycling between high, medium, and low modes with an optional strobe when you press twice in succession on the upper tail-cap switch. The secondary switch located below provides 250 lumens for 3.5 hours. Press both buttons independently to go into exclusive dual-light mode at 500 lumens for 2.5 hours which is ideal to light up your downward facing proximity and at a distance for maximum illumination. The USB-578XL is rated IP-X7 waterproof and features a discretely sleeved collar that opens for direct USB charging. The built-in charging indicator turns from red to green when fully charged. Included is a 2 foot USB charging cable, lithium-ion rechargeable battery and CR123 battery carrier (batteries not included) for added convenience. Made in China.

The USB-588XL USB Dual-Light Rechargeable Tactical Flashlight features a flashlight rated at 1100 lumens, in addition to a 350-lumen downward-facing flood light. In Dual-Light mode, the USB-588XL puts out a combined 850 lumens. At only 6'' long and weighing only 5.9oz, this metal tactical flashlight is multi-functional, cycling between high, medium, and low modes. The USB-588XL is rated IP-X7 waterproof and features a discretely sleeved collar that opens for direct USB charging. The built-in charging indicator turns from red to green when fully charged. Included is a 2-foot USB-C charging cable, lithium-ion rechargeable battery, and CR123 battery carrier (batteries not included). Made in China.

This flashlight is cETLus, ATEX, and IECEx listed intrinsically-safe for use in both above and below ground hazardous locations where explosive gases and dusts may be present. The XPP-5418GX uses an LED rated at 200 lumens that works in conjunction with a high-efficiency, deep parabolic reflector to create a usable flashlight beam rated at 143 meters. The tail switch provides momentary or constant-on functionality. Meets the requirements of NFPA-1971-8.6 (2013). Power comes from 3 AA batteries (not included). Made in China.

The XPP-5422GMX uses an LED rated at 210 lumens that works in conjunction with a high-efficiency deep parabolic reflector to create a usable flashlight beam rated at 187 meters. A 130 lumen, unfocused floodlight is integrated into the housing which is perfect for close-up illumination. Additionally both the flashlight and the floodlight can be turned on at the same time for maximum versatility. The dual body switches provide momentary or constant-on functionality for the flashlight and on/off functionality for the floodlight. Additionally, the integrated magnets located in the base of the handle and the pocket clip, provide for almost limitless hands-free usage. Power comes from 3 AA batteries (not included). Made in China.

This 3 AAA dual-function headlamp is cETLus, ATEX, INMETRO and IECEx listed Intrinsically Safe. This headlamp features a multi-position tilt head design and includes an elastic head strap with a non-slip lining and a heavy-duty rubber head strap for use on a hard hat. The top mounted switch provides user selectable high or low brightness spotlight operation. Power comes from 3 AAA batteries (included). Headlamp is 90 lumens for 13 hours on high and 50 lumens for 22 hours on low. Made in China.

The DICATA Intrinsically Safe Low-Profile Dual-Light Headlamp is cULus, ATEX and IECEx listed Intrinsically Safe and is designed specifically to work on fire helmets and hard-hats that have a flip-up face shield. The unique low-profile shape allows the user to work without having to remove the headlamp when raising or lowering their face shield. The XPP-5462RX is manufactured from glass-filled nylon polymer and features a multi-position tilt head design. Both the spotlight and the floodlight use LEDs and an advanced (TIR) Total Internal Reflection lens designed to optimize lumen output and beam pattern. Front mounted dual switches provide easy access to the spotlight for distance illumination, the floodlight for close-up illumination, and Dual-Light for maximum lighting, versatility and user safety. The XPP-5462RX includes a heavy-duty rubber head strap for use on a fire helmet or hard-hat, and is powered by 3 AA batteries (included). Made in China.

This intrinsically safe, helmet-mounted, multi-function flashlight is the most versatile choice for hands-free lighting. This light outshines the competition with its powerful 360 lumen tightly focused flashlight and a beam distance rating of 218 meters (715 feet). Choose a lower 180 lumen setting for increased runtime or the 30 lumen survival mode for 30 hours. Fits on any fire helmet (or side-brim hard hat) regardless of whether it has an up-turned or down-turned brim thanks to the multi-angle mount. This feature makes it possible to not only avoid goggles, face shields, and other helmet-worn gear but also to place the light exactly where its needed. The XPP-5465 is IP-X7 rated waterproof and meets the requirement for NFPA-1971-8.6 (2013). Powered by 2 CR123 batteries (included). Not compatible with rechargeable batteries. Made in China.

The FORTEM intrinsically safe dual-light flashlight is the most versatile choice for helmet-mounted hands-free lighting. With 250 flashlight lumens that is powerful enough to cut through dense smoke combined with a serious independent 115 lumen floodlight mounted at a 45 degree downward angle, the 5466 is designed for professionals who appreciate performance and convenience. Made in China.

The Intrant Intrinsically-Safe Dual-Light Angle Light is a flashlight, a floodlight and a dual-light angle light that is cULus, ATEX, and IECEx certified intrinsically-safe. This light pivots 90 degrees up and down with a 45 degree downward angled floodlight. The flashlight setting offers user-selectable brightness settings of 200, 110 and 60 Lumens with a 401 meter beam distance. The ultra-tight beam is perfect for cutting through smoke and lighting up objects at great distances. The floodlight setting has user-selectable brightness settings of 100 or 40 lumens, and a survival mode of 20 lumens that provides just enough light in an emergency situation with a run-time of 33 hours. The dual-light mode allows the user to simultaneously see objects at a distance or through the smoke, as well as see the ground in front of them as they walk or work. Light is powered by 3 included AA batteries and can be upgraded to a rechargeable model by adding the optional rechargeable Lithium-ion battery pack and the charger. It is IP-67 dustproof/waterproof and meets requirements of NFPA-1971-8.6. Made in China.

The Intrant Intrinsically-Safe Dual-Light Angle Light is a flashlight, a floodlight and a dual-light angle light that is cULus, ATEX, and IECEx certified intrinsically-safe. This light pivots 90 degrees up and down with a 45 degree downward angled floodlight. The flashlight setting offers user-selectable brightness settings of 200, 110 and 60 Lumens with a 401 meter beam distance. The ultra-tight beam is perfect for cutting through smoke and lighting up objects at great distances. The floodlight setting has user-selectable brightness settings of 100 or 40 lumens, and a survival mode of 20 lumens that provides just enough light in an emergency situation with a run-time of 33 hours. The dual-light mode allows the user to simultaneously see objects at a distance or through the smoke, as well as see the ground in front of them as they walk or work. Light is powered by 3 included AA batteries and can be upgraded to a rechargeable model by adding the optional rechargeable Lithium-ion battery pack and the charger. It is IP-67 dustproof/waterproof and meets requirements of NFPA-1971-8.6. Made in China.

The XPR-5542GMX Rechargeable Dual-Light Flashlight with Magnet is cULus, ATEX, and IECEx listed intrinsically-safe for use in both above and below ground hazardous locations where explosive gases and dusts may be present. It uses a CREE LED rated at 400 lumens that works in conjunction with a high-efficiency deep parabolic reflector to create a usable beam rated at 215 meters. A 225 lumens unfocused floodlight is integrated in to the housing which is perfect for close-up illumination. Additionally both the flashlight and the floodlight can be turned on at the same time for maximum safety and versatility. The flashlight body switch provides momentary or constant-on functionality, a set of user-selectable high, medium or low-brightness settings as well as a strobe and the second body switch operates the floodlight. The powerful magnet built into the tail-cap provides for hands-free use. Power comes from a rechargeable Lithium-ion battery (included). Made in China.

The Intrant Intrinsically-Safe Dual-Light Angle Light is a flashlight, a floodlight and a dual-light angle light that is cULus, ATEX, and IECEx certified intrinsically-safe. This light pivots 90 degrees up and down with a 45 degree downward angled floodlight. The flashlight setting offers user-selectable brightness settings of 200, 110 and 60 Lumens with a 401 meter beam distance. The ultra-tight beam is perfect for cutting through smoke and lighting up objects at great distances. The floodlight setting has user-selectable brightness settings of 100 or 40 lumens, and a survival mode of 20 lumens that provides just enough light in an emergency situation with a run-time of 33 hours. The dual-light mode allows the user to simultaneously see objects at a distance or through the smoke, as well as see the ground in front of them as they walk or work. Light is powered by 3 included AA batteries and can be upgraded to a rechargeable model by adding the optional rechargeable Lithium-ion battery pack and the charger. It is IP-67 dustproof/waterproof and meets requirements of NFPA-1971-8.6. Made in China.

The Intrant Intrinsically-Safe Dual-Light Angle Light is a flashlight, a floodlight and a dual-light angle light that is cULus, ATEX, and IECEx certified intrinsically-safe. This light pivots 90 degrees up and down with a 45 degree downward angled floodlight. The flashlight setting offers user-selectable brightness settings of 200, 110 and 60 Lumens with a 401 meter beam distance. The ultra-tight beam is perfect for cutting through smoke and lighting up objects at great distances. The floodlight setting has user-selectable brightness settings of 100 or 40 lumens, and a survival mode of 20 lumens that provides just enough light in an emergency situation with a run-time of 33 hours. The dual-light mode allows the user to simultaneously see objects at a distance or through the smoke, as well as see the ground in front of them as they walk or work. Light is powered by 3 included AA batteries and can be upgraded to a rechargeable model by adding the optional rechargeable Lithium-ion battery pack and the charger. It is IP-67 dustproof/waterproof and meets requirements of NFPA-1971-8.6. Made in China.