Knives with N690 Steel Blades

12 1/8" overall. 7" partially serrated N690 stainless cobalt steel tanto blade with black finish. Black Forprene handle with visible tang end. Lanyard hole. Black INPAX belt sheath. Made in Italy.

11 1/2" overall. 6" N690 stainless partially serrated blade with Testudo finish. Black Forprene handle. Full tang. Lanyard hole. Black rigid ABS polymer sheath features six polymer D-Ring attachments, a tactical kit with two leg belts, and a removable belt to provide more length. The belt on the back of the sheath can be set in two positions which allows two different lengths on the leg. The security lace, with two snaps, is reversible for left handers. Made in Italy.

12 1/4" overall. 7" partially serrated BOHLER N690 stainless cobalt steel blade with MIL-C-13924 black finish. Black rigid ABS polymer sheath features six polymer D-Ring attachments, a tactical kit with two leg belts, and a removable belt to provide more length. The belt on the back of the sheath can be set in two positions which allows two different lengths on the leg. The security lace, with two snaps, is reversible for left handers. Made in Italy.

12" overall. 7" black finish N690 cobalt reinforced stainless steel blade. Grooved black nylon handle with black finish metal guard and pommel. Comes with standard side sheath which includes automatic retention system, protective flap and is M.O.L.L.E. compatible. Made in Italy.

12" overall. 7" Geo-camo finish N690 cobalt reinforced stainless steel blade. Grooved desert tan nylon handle with black finish metal guard and pommel. Comes with a special HCS coyote tan sheath specifically developed for SOF units. Made in Italy.

5 5/8" closed. N690 stainless blade with Testudo finish. Extra safe locking device is a steel pin that is hand screwed into place, locking blade open or closed. Black anodized anticorodal aluminum alloy handles. Lanyard. OD green nylon sheath is MOLLE compatible and holds diamond sharpener. Sheath can accommodate knife in open or closed position. Made in Italy.

5 1/4" closed linerlock. N690 stainless cobalt steel drop point blade with Testudo finish and dual thumb studs. Blade features extended tang for easier one hand opening. Black anodized anticorodal aluminum handles. Reversible pocket clip. Glass breaker tip built into end of handle. Made in Italy.

5 1/4" closed linerlock. N690 stainless cobalt steel drop point blade with Testudo finish and dual thumb studs. Blade features extended tang for easier one hand opening. Black anodized anticorodal aluminum handles. Integrated seat belt cutter. Reversible pocket clip. Glass breaker tip built into end of handle. Made in Italy.

6" closed linerlock. N690 stainless cobalt steel drop point blade with Testudo finish and dual thumb studs. Blade features extended tang of easier one hand opening. Black anodized anticorodal aluminum handles. Reversible pocket clip. Glass breaker tip built into end of handle. Made in Italy.

6" closed linerlock. N690 cobalt stainless drop point blade with Testudo finish and dual thumb studs. Blade features extended tang for easier one hand opening and special "Col Moschin" etching. Black anodized anticorodal aluminum handles with etch. Reversible pocket clip. Glass breaker tip built into end of handle. Made in Italy.

6" closed. 4 1/2" Geo-Camo finish N690 stainless cobalt steel drop point blade with extended tang for easier one hand opening. Desert warfare (tan) finish aluminum alloy handles with integrated sub-hilt. Sub hilt provides a stable grip that prevents slipping. Reversible black finish stainless pocket clip. Glass breaker tip built into end of handle. Made in Italy.

4 1/4" closed. N690 cobalt stainless drop point blade with Testudo finish and dual thumb studs. Blade features extended tang for easier one hand opening. Black anodized anticorodal aluminum handles. Reversible pocket clip. Glass breaker tip built into end of handle. Made in Italy.

4" closed linerlock. Black finish N690 stainless cobalt steel drop point blade with dual thumb studs. Black anodized aluminum handles with reversible pocket clip. Made in Italy.

4" closed linerlock. Black finish N690 stainless cobalt steel tanto blade with dual thumb studs. Black anodized aluminum handles with reversible pocket clip. Made in Italy.

5" closed linerlock. Black finish N690 stainless cobalt steel drop point blade with dual thumb studs. Black anodized aluminum handles with reversible pocket clip. Made in Italy.

5 7/8" closed linerlock. Black finish N690 stainless cobalt steel blade with dual thumb studs. Black anodized anticorodal aluminum handles. Reversible pocket clip. Made in Italy.

5 7/8" closed lockback. Black finish N690 stainless cobalt steel blade with dual thumb studs. Black anodized aluminum handles with reversible stainless pocket clip. End of handle is tempered steel making it an effective glass breaker. Lanyard hole. Manual safety lock. Made in Italy.

8 3/8" overall. 4 1/4" partially serrated N690 stainless cobalt steel tanto blade with black finish. Black Forprene handle with visible tang end. Black ABS sheath with Tek-Lok. Made in Italy.

8 1/2" overall. 4 1/4" N690 geo camo finish blade. Desert tan handle and blade trim. Desert tan molded Tek-Lok sheath can be worn vertically or horizontally. Made in Italy.

8 1/2" overall. 3 3/4" N690 stainless blade with Testudo finish. Black Forprene handle. Full tang. Lanyard hole. Black hard sheath has a Tek-Lok which means it can be positioned either vertically or horizontally. The only security on the sheath is automatic with a pressure point for removal and insertion. Made in Italy.

12 1/8" overall. 7" black finish partially serrated N690 stainless cobalt steel tanto blade. Black Forprene handle with black finish steel guard and pommel. Black ABS and nylon belt sheath with integrated wire cutter. Made in Italy.

11 3/4" overall. 7" black finish N690 stainless cobalt steel double edge blade. Black textured polyamide handle with skull crusher pommel. Lanyard hole. Black nylon and ABS sheath. Made in Italy.

11 5/8" overall. 5 5/8" black matte finish N690 stainless cobalt steel blade with partially serrated top edge and line cutter. Back textured polyamide handle with skull crusher pommel. Handle may be disassembled so blade may be attached to pole or spear. Black ABS and nylon belt sheath with arm/leg straps. Also comes with Tek-Lok. Knife comes in plastic storage case. Made in Italy.

12 1/2" overall. 7 1/4" BOHLER N690 stainless steel MIL-C-13924 black finish blade. NATO MIL-SPEC elastomer Forprene handle. Full tang. Double sheath style. The outer sheath is a nylon soft sheath with straps. Inside there is a hard sheath made of a nylon composite with 15% fiberglass. This is where the blade actually sits. The 39-09 double sheath is designed to be strapped to the calf in the style of Italian parachutists. Removable hard inner sheath. Hard side storage case. Made in Italy.

12 1/2" overall. 7 1/4" BOHLER N690 stainless steel MIL-C-13924 black finish blade. NATO MIL-SPEC elastomer Forprene handle. Full tang. Double sheath style. The outer sheath is a nylon soft sheath with straps. Inside there is a hard sheath made of a nylon composite with 15% fiberglass. This is where the blade actually sits. The 39-09 double sheath is designed to be strapped to the calf in the style of Italian parachutists. Removable hard inner sheath. Hard side storage case. Made in Italy.

5" closed linerlock. 3 3/4" black finish N690Co cobalt vanadium stainless blade with dual thumb studs. Green and black micarta handles with aggressive texture. Lanyard hole. Black leather belt sheath. Features L.A.W.K.S. system. Fox knives - Made in Italy.

5 1/4" closed linerlock. 3" black Teflon coated N690Co vanadium stainless blade with thumb slot and extended tang. Black G-10 handles with black finish stainless pocket clip. Integrated finger hole. Made in Italy.

8 3/4" overall. 4" N690Co cobalt vanadium stainless blade. Full tang. Olive wood handles. Ring pommel. Brown leather belt sheath. Made in Italy.

12" overall. 6 5/8" partially serrated N690Co steel drop point blade with black Teflon coating. USMC tang stamp. Contoured black rubber handle. Lanyard loop. Black nylon sheath with leg strap. Made in Italy.

6" closed linerlock. CN690Co Cobalt Vanadium steel tanto blade with gray DLC coating. Blade features sawback top edge and dual thumb studs. L. A. W. K. S. blade locking system. CNC machined, coarse textured black G-10 handles. Lanyard hole. Integrated glass breaker and seat belt cutter. Heavy camouflage nylon belt sheath may be worn horizontally or vertically. Made in Italy.

8 1/4" overall. 3 3/4" satin finish N690Co cobalt vanadium steel blade. Full tang. Green canvas micarta handles. Brown leather belt sheath. Made in Finland.

From the Greek language, the "thing" is a field knife, solid and heavy but still compact. 12" overall. 6 1/2" black finish N690 stainless cobalt steel blade with sawback section. Black Forprene handle. OD green MOLLE. compatible nylon side sheath. A survival kit is carried in a pocket which is fastened to the nylon sheath by a MOLLE. system, making the Ontos a true survival tool. Survival kit contains: Water bag; Nylon cord; Button compass; Candle, Flint & Striker; Fishing kit; Mini multi-tool; Matches; Sewing kit; Water purification tablets; Single edge razor; Mayday mirror; Whistle; Snare wire; Wire saw; Pencil and Survival instructions. A fluorescent stick (lasting for 12 hours) and a diamond sharpener are also included. Made in Italy.

12.25" overall. 6.25" MIL-C-13924 burnished Bohler N690 stainless blade. Tan Forprene handle. Desert tan/green MOLLE compatible reinforced nylon belt sheath with adjustable leg strap. Lanyard hole. Boxed. Made in Italy.

Overall: 12.25"; 6.25" Bohler N690 Cobalt Stainless MIL-C-13924 black coated blade. Forprene handle. OD green MOLLE compatible reinforced nylon belt sheath with adjustable leg strap. Lanyard Hole. Boxed. Made in Italy.

4 1/4" closed linerlock. 2 3/4" Geo-Camo finish N690 stainless cobalt steel drop point blade with dual thumb studs, extended tang and safety lock. Desert tan anodized anticorodal handle. Black finish stainless reversible pocket clip. Made in Italy.

4" closed linerlock. 2 3/4" Geo-Camo finish N690 stainless cobalt steel drop point blade with dual thumb studs. Desert tan anodized anticorodal handle. Black finish stainless reversible pocket clip. Made in Italy.

5" closed linerlock. 3 1/2" Geo-Camo finish N690 stainless cobalt steel drop point blade with dual thumb studs and safety lock. Desert tan anodized anticorodal handle. Black finish stainless reversible pocket clip. Made in Italy.

5 3/4" closed lockback. 4 1/2" Geo-Camo finish N690 stainless cobalt steel partially serrated clip point blade with dual thumb studs. Desert warfare (tan) finish aluminum handles. Reversible black finish stainless pocket clip. Lanyard hole. Glass breaker tip built into end of handle. Manual safety lock. Made in Italy.

8 3/8" overall. 4 1/4" Geo Camo finish N690 stainless cobalt steel partially serrated tanto blade. Full tang. Desert warfare (tan) Forprene handle with black finish steel guard with lashing hole and visible tang end. Lanyard hole. Desert warfare (tan) ABS sheath with Tek-Lok. Made in Italy.

8 1/2" overall. 4 1/4" black MIL-C-13924 coated N690 stainless cobalt steel blade. Black Forprene handle. Lanyard hole. Black molded Tek-Lok sheath. Made in Italy.

8 1/2" overall. 4 1/4" Geo-Camo finish N690 stainless cobalt steel blade. Desert warfare tan Forprene handle. Lanyard hole. Desert molded Tek-Lok sheath. Made in Italy.

8 3/4" overall. 4 1/4" N690 stainless dagger blade with black finish. Black Forprene handles with lanyard hole. Black injection molded ABS sheath. Made in Italy.

4" closed. 2 3/4" N690Co stainless matte finish blade with thumb stud. Also includes flat screwdriver, bottle opener, can opener and marlin spike. Black aluminum handles with bail. Stainless pocket clip. Made in Italy.

12 1/4" overall. 7" N690Co stainless blade with sawback and black Teflon coating. Full tang. OD green Forprene handle. Integral guard and lanyard ring/glass breaker. OD green cordura belt sheath with multiple tie down options. Comes with survival kit that is packaged in tin and a green cordura sheath that can be attached to the main sheath. Made in Italy.

12" overall. 6 1/2" black finish N690Co cobalt vanadium stainless modified tanto blade. Full tang. Extended tang with lanyard hole. Integral guard. Green and black micarta handles with aggressive texture. Black nylon belt sheath with utility pouch, leg ties and cord lanyard. Made in Italy.

12" overall. 7 1/2" black finish N690Co cobalt vanadium stainless blade. Full tang. Extended tang with lanyard hole. Integral guard. Green and black micarta handles with aggressive texture. Black nylon belt sheath with utility pouch, leg ties and cord lanyard. Made in Italy.

5 7/8" closed. 3 7/8" matte finish partially serrated N690Co cobalt vanadium stainless blade with thumb hole pull. Red Forprene handles with neon yellow trim. Integrated seat belt cutter and glass breaker tip. Black finish stainless pocket clip. Black cordura belt sheath. Made in Italy.

5 1/4" closed linerlock. 3" stonewash finish N690Co cobalt vanadium stainless blade with thumb slot and extended tang. Gray anodized aluminum handles with finger ring and black finish stainless pocket clip. Made in Italy.

3 1/8" closed. 2" N690Co stainless blade with thumb hole. Textured black FRN handles. Stainless wire design pocket clip. Non-Locking Folder. Made in Italy.

3 1/8" closed. 2" N690Co stainless blade with thumb hole. Textured pink FRN handles. Stainless wire design pocket clip. A portion of the proceeds from the sale of this knife are donated to Y-ME National Breast Cancer Foundation. Non-Locking Folder. Made in Italy.

4 1/4" closed. 3 1/4" N690Co Cobalt vanadium steel blade with black traction coating and dual thumb studs. Black/blue G-10 handles. Black finish stainless pocket clip. Black nylon belt sheath. Comes with survival whistle. Made in the USA.

18 1/2" overall. 12 1/2" black finish N690 cobalt steel blade. Black Forprene handle with black cord lanyard. Black nylon M.O.L.L.E. compatible belt sheath with shoulder strap. Made in Italy.

14 7/8" overall. 9 1/2" black finish N690 stainless cobalt steel blade. Black Forprene handle. Black nylon belt sheath with leg straps and removable shoulder strap. Made in Italy.

14 1/2" overall. 9 1/2" black finish N690Co Cobalt Vanadium stainless kukri blade. Full tang. Black Forprene handles. Integral guard and lanyard ring. Black Cordura M.O.L.L.E. compatible belt sheath with leg straps. Boris Sterm design. Made in Italy.

14 1/2" overall. 9 1/2" black finish N690Co Cobalt Vanadium stainless kukri blade. Full tang. Black Forprene handles. Integral guard and lanyard ring. Black Cordura M.O.L.L.E. compatible belt sheath with leg straps. Boris Sterm design. Made in Italy.

8 1/4" overall. 3 3/4" satin finish N690Co stainless blade. Full tang. Green linen micarta handles. Lanyard hole. Brown leather belt sheath. Bulk packed. Made in Finland.

5" overall. 1 3/4" blade. One piece Bohler N690 stainless construction with black finish. Molded black Kydex neck sheath with black cord lanyard. Made in Italy.

5" overall. 1 3/4" blade. One piece Bohler N690 stainless construction with stonewash finish. Molded black Kydex neck sheath with black cord lanyard. Made in Italy.

The Selvan was developed in cooperation with master instructor Daniele Dal Canto of F.I.S.S.S. (Italian Survival Federation). The project was based on slightly modifying the military survival knife Ontos. The aim was to heighten and increase the performance of the knife as a working tool. A longer handle and a heavier blade offer a better chopping and cutting action. 12 1/4" overall. 6 1/4" Bohler N690 cobalt stainless blade with MIL-C-13924 black coating. Black Forprene handle. Desert tan/green heavy-duty, reinforced nylon belt sheath with adjustable leg strap. MOLLE compatible. Made in Italy.

19 1/2" overall. 13 1/2" black (Testudo) finish N690 stainless cobalt steel blade. Black Forprene handle. Black nylon belt sheath with leg straps and removable shoulder strap. Made in Italy.

Tactical Version Fixed Blade. 12 5/8" overall. 7 1/4" Böhler N690 stainless cobalt steel blade with black finish. Black Forprene (NATO MIL-SPEC elastomer) handles. Black Cordura belt sheath with leg strap. Made in Italy.

12 1/4" overall survival knife. 7 1/8" black finish N690Co Cobalt Vanadium stainless partially serrated sawback blade. Tan Forprene handle with integrated guard. Tan Forprene and nylon M.O.L.L.E. compatible belt sheath with stainless wire cutter and diamond sharpening plate. Cord lanyard. Made in Italy.

10" overall. (Special Warrior Operation Group). 4 1/2" black finish N690Co Cobalt Vanadium stainless blade. Full extended tang with lanyard hole. End may be used as a glass breaker. Textured black G-10 handles. Molded black Kydex sheath with M.O.L.L.E. clips. Made in Italy.

12 1/4" overall. 7 1/4" black finish N690Co Cobalt Vanadium stainless partially serrated blade. Top of blade has 1 3/4" sharpened section at the tip. Black Forprene handle. Black Forprene and nylon M.O.L.L.E. compatible belt sheath with stainless wire cutter and diamond sharpening plate. Cord lanyard. Made in Italy.

Black finish N690Co Cobalt Vanadium stainless blade. Green and black micarta handles with aggressive texture. Lanyard hole. Black leather belt sheath. Made in Italy.

12 1/2" overall. 7 5/8" black finish N690Co Cobalt Vanadium stainless sawback blade. Full, extended tang with lanyard slot. Grooved black G-10 handles. Black nylon M.O.L.L.E. compatible belt sheath with cord lanyard. Comes with survival tin which includes firestarter, matches, pocket knife, candle, snare, clothespin, whistle, razor blade, pencil & paper, bandages and more. Survival kit comes with individual black nylon belt sheath. Also comes with bonus 6" ChemLight green glow stick light. Made in Italy.

12" overall. 6 5/8" black finish N690Co Cobalt Vanadium stainless blade. Black Forprene handle. Black nylon M.O.L.L.E. compatible sheath with leg strap and utility pocket. Made in Italy.

An updated version of the original RAO. The RAO Avio is still a folder but is meant to be carried as a fixed blade. 10 3/8" open. 5 5/8" closed. 4 5/8" N690 stainless cobalt steel blade with black Testudo finish. Extra safe locking device is a steel pin that is hand screwed into place, locking blade open or closed. Black anodized Anticorodal aluminum alloy handles. Lanyard. Specially designed, heavy-duty, green nylon MOLLE compatible belt sheath with protective liner. Survival kit contains: whistle, compass, paracord, flint and striker, water purification tablets, snare wire, wire saw, light, and a diamond sharpener. Kit is stored in a heavy-duty green MOLLE compatible sheath. Kit can be carried as a separate unit, or attached to the sheath or a MOLLE vest. Closed kit measures approximately 5 1/2" x 3 1/4" x 2". Made in Italy.

5 3/4" closed. 4 3/4" black finish N690 cobalt steel drop point blade. Locking system with extra safety locks the knife in the open position to make a strong fixed blade knife. Black aluminum handles. Black elastic cord lanyard. Black nylon belt M.O.L.L.E. compatible belt sheath carries the knife in the open or closed position. Comes with 3" x 3/4" diamond sharpener. Made in Italy.

5 5/8" closed linerlock. 4 1/2" N690Co Cobalt Vanadium stainless blade with thumb slot and extended tang. Black micarta handles. Features Lake and Walker blade safety. Lanyard hole. Reversible stainless pocket clip. Made in Italy.

5 5/8" closed linerlock. 4 1/2" N690Co Cobalt Vanadium stainless blade with thumb slot and extended tang. Brown Ziricote wood handles. Features Lake and Walker blade safety. Lanyard hole. Reversible stainless pocket clip. Made in Italy.

4 3/4" closed. 3 1/2" black finish N690Co Cobalt Vanadium stainless recurve blade with extended tang. Textured black G-10 handles. Black finish stainless pocket clip. Lanyard hole. Deluxe black nylon zip-up storage pouch with belt loops, nylon keyring tab, storage pocket and embroidered logo. Designed by Jens Anso. Made in Italy.

3 7/8" closed lockback. 2 5/8" N690Co Cobalt Vanadium stainless blade. Textured black FRN handles. Stainless pocket clip. Jens Anso design. Made in Italy.

4 7/8" closed lockback. 3 1/2" N690Co Cobalt Vanadium stainless blade. Green micarta handles. Lanyard hole. Black leather belt sheath. Jens Anso design. Made in Italy.

6 3/4" closed lockback. 5 3/8" N690Co Cobalt Vanadium stainless blade with sandblast finish. Green micarta handles. Olive green nylon M.O.L.L.E. compatible belt sheath allows the knife to be carried in fixed blade position. Also includes additional sheath to carry knife in the closed position. Made in Italy.

5" closed. 2 1/2" black finish N690Co Vanadium stainless karambit blade with dual thumb studs. Textured black G-10 handles with finger ring. Four way reversible black finish stainless pocket clip. Made in Italy.

Military Special Projects Individual Equipment. 4 1/2" closed linerlock. 3 1/2" N690Co Cobalt Vanadium steel blade with black traction coating and dual thumb studs. Black finish 6061-T6 aircraft aluminum handles with machined slot cutouts. Black finish stainless pocket clip. Comes with survival whistle. Fleece liner, tan leather zip up storage pouch. Made in the USA.

5 1/4" closed. 4" satin finish Bohler N690Co stainless blade with swedge grind and dual thumb studs. Brown Cocobolo wood handles. Stainless pocket clip. Weight: 6.4 oz. Made in Italy.

5 1/4" closed. 4" satin finish Bohler N690Co stainless blade with swedge grind and dual thumb studs. Black carbon fiber handles. Stainless pocket clip. Weight: 6.4 oz. Made in Italy.

5 1/4" closed. 4" bead blast finish Bohler N690Co stainless blade with swedge grind and dual thumb studs. Black canvas micarta handles. Stainless pocket clip. Weight: 6.4 oz. Made in Italy.

5 5/8" closed. 4 1/4" satin finish N690Co stainless blade with dual thumb studs. Brown pau satin (cocobolo) wood handles. Stainless pocket clip. Made in Italy.

5 5/8" closed. 4 1/4" satin finish N690Co stainless blade with dual thumb studs. Black carbon fiber handles. Stainless pocket clip. Made in Italy.

4 3/4" closed lockback. 3 1/2" N690Co cobalt vanadium steel blade with dual thumb studs and nail nick. Contoured, ergonomic green canvas micarta handles. Integrated finger guard. Lanyard hole. Removable, reversible stainless pocket clip. Metal, foam lined, storage case. Made in Finland.

5" overall. 1 3/4" blade. One piece Bohler N690 stainless construction with Desert Warfare finish. Enlarged lanyard hole. Molded tan Kydex neck sheath with Desert Warfare cord lanyard. Made in Italy.

6" closed lockback. Bead blasted N690Co stainless wide bellied skinner blade. Fingergrooved OD green, high pressure laminate handles with lanyard hole and safety lock. Nylon sheath with MOLLE system. Made in Italy.

6" closed lockback. Bead blasted N690Co stainless wide bellied skinner blade. Fingergrooved white, high pressure laminate handles with lanyard hole and safety lock. Nylon sheath with MOLLE system. Made in Italy.

13" overall. 7" N690Co stainless double edge dagger blade with black finish. Full, extended tang with integrated guard, pointed pommel, and lanyard hole. Grooved black G-10 handles. Black leather M.O.L.L.E. compatible belt sheath with black cord lanyard. Made in Italy.

13" overall. 7" N690Co stainless double edge dagger blade with coyote tan finish. Full, extended tang with integrated guard, pointed pommel, and lanyard hole. Grooved black and coyote tan G-10 handles. Black leather M.O.L.L.E. compatible belt sheath with black cord lanyard. Made in Italy.

12 1/2" overall. 7 1/4" tan finish N690Co stainless blade with small sawback section and thumb ridge. Integral finger guard. Full, extended tang with lanyard loop. Grooved coyote tan Mil-Spec Forprene handles. OD green nylon M.O.L.L.E. compatible belt sheath. Comes with deluxe survival kit which stores in sealed aluminum box which fits in the sheath. The survival kit contains: Container for water; Nylon strap; Mini Compass; Candle; Flint; Saw wire; Fishing kit; Multi-tool; Matches; Needle and thread kit; Blade; Emergency whistle; Copper wire; SOS mirror; and pencil. Made in Italy.

10 1/2" overall. 4 3/4" gray finish N690Co cobalt steel sawback blade. Full tang. Green micarta handles with lashing holes. Black molded Kydex sheath with lashing holes. Made in Italy.

4 7/8" closed linerlock. 3 5/8" satin finish Bohler N690Co stainless recurve blade with grooved thumb pull with lashing hole and extended tang. Hardened to 58-60 HRC. Fully stainless thrust bearings. Carbon fiber handles with finger choil. Lanyard hole. Reversible matte finish stainless pocket clip. Designed by knife designer and teacher of the martial art “Krav Magà” for the Israeli Army, Boris Manasherov. Made in Italy.

4 7/8" closed linerlock. 3 5/8" stonewash finish Bohler N690Co stainless recurve blade with grooved thumb pull with lashing hole and extended tang. Hardened to 58-60 HRC. Fully stainless thrust bearings. Mixed color canvas micarta handles with finger choil. Lanyard hole. Reversible matte finish stainless pocket clip. Designed by knife designer and teacher of the martial art “Krav Magà” for the Israeli Army, Boris Manasherov. Made in Italy.

6 3/4" overall. 3 1/2" stonewash finish N690 stainless false edge blade. Full, extended tang with lanyard hole. Textured black G-10 handles. Brown leather belt sheath. Ideal for everyday carry. Made in the USA.

6 3/4" overall. 3 1/2" stonewash finish N690 stainless false edge blade. Full, extended tang with lanyard hole. Textured OD green G-10 handles. Brown leather belt sheath. Ideal for everyday carry. Made in the USA.

6 3/4" overall. 3 1/2" stonewash finish N690 stainless false edge blade. Full, extended tang with lanyard hole. Textured brown G-10 handles. Brown leather belt sheath. Ideal for everyday carry. Made in the USA.

6 3/4" overall. 3 1/2" stonewash finish N690 stainless false edge blade. Full, extended tang with lanyard hole. Textured black/blue G-10 handles. Brown leather belt sheath. Ideal for everyday carry. Made in the USA.

9" overall. 4 1/8" two tone satin and stonewash finish N690 stainless drop point blade with thumb ridge. Full tang. Checkered black G-10 handles. Lanyard hole. Dark brown leather belt sheath. Made in the USA.

8 3/8" overall. 3 1/2" black finish Bohler N690 stainless modified tanto blade. Integral finger guard with lashing hole. Blade is flat ground on both sides. Black Forprene handle. Heavy duty tip with enlarged lanyard hole. Deluxe molded black polymer belt sheath. Made in Italy.

8 3/8" overall. 3 1/2" desert warfare finish Bohler N690 stainless modified tanto blade. Integral finger guard with lashing hole. Blade is flat ground on both sides. Desert tan Forprene handle. Heavy duty tip with enlarged lanyard hole. Deluxe molded desert tan polymer belt sheath. Made in Italy.

6 1/4" closed linerlock. 4 1/4" black finish Bohler N690 stainless blade. Unique style blade has pointed double edge tip with sharpened edges. This blade style is designed to maximize penetration. Integral guard with lashing holes. Textured black aluminum handles. Back side of handle features a special tool to cut through plastic handcuffs. Rear glass breaker tip. Reversible black finish stainless pocket clip. Deluxe black molded ABS and Cordura M.O.L.L.E. compatible belt sheath with a variety of carrying options including attachment to a tactical jacket or vest, and side carry. Sheath is designed for knife to be carried in the open position. Designed in collaboration with G.I.G.N. (Special Unit of the French National Gendarmerir). Made in Italy.

4 3/4" closed linerlock. 2 1/2" matte finish Bohler N690 stainless tanto blade with dual thumb studs. Textured gray anticorodal anodized aluminum handles with machined slot cutouts. Marlin spike is located on the tang end of handle. Reversible matte finish stainless pocket clip. Plastic spiral design lanyard with quick release belt attachment. The length and flexibility of the lanyard allows you to work with the tool in the maximum operating area which a shorter lanyard would not allow. Made in Italy.

5 3/4" closed. 4 3/8" desert warfare finish Bohler N690 stainless flat ground Italian style blade with dual thumb studs. Back lock blade locking mechanism. An extra manual security lock is also found on the lever and prevents the blade from closing accidentally. Desert tan anticorodal anodized aluminum handles. Lanyard hole. Black finish stainless pocket clip. Made in Italy.

11 1/2" overall. 6 1/2" N690 steel double edge blade. Black anticorodal anodized aluminum handle with stainless guard and extended tang with lanyard hole. Black nylon MOLLE compatible belt sheath. Made in Italy.

7 3/4" overall. 4 3/4" black finish Bohler N690 stainless partially serrated dagger blade. Blade also has belt cutter and screw-pin shackle wrench. Finger grooved black Forprene handle. End of handle has sharpened tip and lanyard hole. Molded black Kydex sheath with Tek-Lock system. Developed in collaboration with Special Forces operators. Made in Italy.

5" closed linerlock. 3 1/2" N690Co stainless clip point blade with dual thumb studs. Contoured Cocobolo wood handles with lanyard hole. Brown leather belt sheath. Made in Italy.

4 1/2" closed linerlock. 3 1/2" black cerakote finish N690Co stainless modified tanto blade with thumb disk. Black G-10 handles. Stainless pocket clip. Comes in Fox custom zip case. Made in Italy.

10 3/8" overall. 5 3/8" black CeraKote finish N690Co stainless blade. Round design grooved black TPR rubber handle with tempered black finish stainless glass breaker pommel. Molded black nylon belt sheath with M.O.L.L.E. system and nylon web leg straps. Comes with interchangeable aluminum pommel cap. Also includes tool for removing handles and pommel. Made in Italy.

3 3/8" closed non-locking folder. 2 1/2" N690Co stainless leaf shaped blade with thumb hole. Lightweight black FRN handles. Reversible stainless wire design pocket clip. Made in Italy.

3" closed notched-joint. 2" N690Co stainless sheepfoot blade with double dent opener for fingernail-free two-handed opening. Black contoured fiberglass-reinforced nylon handles with notched-joint mechanism. Lanyard hole. Made in Italy.

3" closed notched-joint. 2 1/8" N690Co stainless sheepsfoot style blade with Double Dent symmetrical dimples in the blade that provide a fingernail-free two-handed opening. Blue FRN handle with index finger choil and lanyard hole. Made in Italy.

3" closed notched-joint. 2 1/8" N690Co stainless sheepsfoot style blade with Double Dent symmetrical dimples in the blade that provide a fingernail-free two-handed opening. Gray FRN handle with index finger choil and lanyard hole. Made in Italy.

3" closed notched-joint. 2 1/8" N690Co stainless sheepsfoot style blade with Double Dent symmetrical dimples in the blade that provide a fingernail-free two-handed opening. Orange FRN handle with index finger choil and lanyard hole. Made in Italy.

3" closed notched-joint. 2 1/8" N690Co stainless sheepsfoot style blade with Double Dent symmetrical dimples in the blade that provide a fingernail-free two-handed opening. Red FRN handle with index finger choil and lanyard hole. Made in Italy.

4 1/2" closed. 3 1/2" coyote tan traction coated N690Co cobalt vanadium steel drop point blade with dual thumb studs. Coyote tan traction coated 6061-T6 aircraft aluminum handles with machined cutouts. Coyote tan traction coated tool steel pocket clip. Comes in suede shearling lined zippered pouch with black emergency safety whistle. Made in the USA.

4 1/2" closed. 3 1/2" black traction coated N690Co cobalt vanadium steel drop point blade with dual thumb studs. Coyote tan traction coated 6061-T6 aircraft aluminum handles with machined cutouts. Black traction coated tool steel pocket clip. Comes in suede shearling lined zippered pouch with black emergency safety whistle. Made in the USA.

4 1/2" closed. 3 1/2" black traction coated N690Co cobalt vanadium steel tanto blade with dual thumb studs. Coyote tan traction coated 6061-T6 aircraft aluminum handles with machined cutouts. Black traction coated tool steel pocket clip. Comes in suede shearling lined zippered pouch with black emergency safety whistle. Made in the USA.

4 1/4" closed framelock. 2 7/8" satin finish N690 Bohler steel clip blade with thumb slot. Features ball bearing pivot opening system. Carbon fiber front handle. Matte finish titanium frame/back handle. Lanyard slot. Reversible matte finish pocket clip. Named after the Norse God Odin. Jesper Voxnaes design. Made in Italy.

4 1/4" closed framelock. 2 7/8" satin finish N690 Bohler steel clip blade with thumb slot. Features ball bearing pivot opening system. Matte finish Titanium front handle. Matte finish titanium frame/back handle. Lanyard slot. Reversible matte finish pocket clip. Named after the Norse God Odin. Jesper Voxnaes design. Made in Italy.

4 1/2" closed framelock. 3 1/2" stonewash finish N690Co stainless drop point blade with thumb slot. Carbon fiber front handle and stonewash finish back handle. Lanyard slot. Stainless pocket clip. Made in Italy.

4 1/4" closed framelock. 2 7/8" stonewash finish N690 Bohler steel clip blade with thumb slot. Features ball bearing pivot opening system. OD green G-10 front handle. Matte finish titanium frame/back handle. Lanyard slot. Reversible matte finish pocket clip. Named after the Norse God Odin. Jesper Voxnaes design. Made in Italy.

4 1/2" closed framelock. 3 1/2" stonewash finish N690Co stainless drop point blade with thumb slot. Titanium front handle and stonewash finish back handle. Lanyard slot. Stainless pocket clip. Made in Italy.

4 1/2" closed framelock. 3" black PVD coated N690Co stainless drop point blade with thumb slot. Carbon fiber front handle and stonewash finish stainless back handle. Lanyard slot. Stainless pocket clip. Made in Italy.

3 3/4" overall. 1 1/2" curved design Karambit blade. One-piece black Cerakote finish N690C stainless construction with integrated finger ring. Black Kydex sheath with beaded neck chain. Made in Italy.

3 3/4" overall. 1 1/2" curved design Karambit blade. One-piece stonewash finish N690C stainless construction with integrated finger ring. Black Kydex sheath with beaded neck chain. Made in Italy.

6 1/2" closed linerlock. 3 3/4" black finish Bohler N690 steel blade. Black aluminum handles. Lanyard hole. Made in Italy.

6 1/2" closed linerlock. 3 3/4" satin finish Bohler N690 steel blade. Black aluminum handles. Lanyard hole. Made in Italy.

5 3/4" closed. 4 3/4" black MIL-C-13924 burnished Bohler N690 stainless blade. Black anticorodal anodized aluminum handles. Made in Italy.

13" overall. 6 3/4" black finish N690Co stainless double edge dagger blade. Full tang. Black milled rib texture G-10 handles with guard, glass breaker end, and lanyard hole. Black polymer and nylon belt sheath. Made in Italy.

12 3/8" overall. 7 1/4" coyote tan finish N690Co Cobalt Vanadium stainless partially serrated tanto blade with blood groove and lashing hole. Hardened to 58-60 HRC. Grooved coyote tan Kraton handle with black stainless guard and pommel. Coyote brown cordura MOLLE compatible belt fastener with nylon reinforced fiberglass sheath with wire cutting plate and sharpening stone. OD green nylon leg ties. Made in Italy.

5 1/4" closed linerlock. 3" black finish N690Co Cobalt Vanadium stainless blade with thumb slot and extended tang. Black anodized aluminum handles with finger ring. Reversible black finish stainless pocket clip. Made in Italy.

5 1/4" closed linerlock. 3" stonewash finish N690Co Cobalt Vanadium stainless blade with thumb slot and extended tang. Black anodized aluminum handles with finger ring. Reversible stonewash finish stainless pocket clip. Made in Italy.

5 1/4" closed linerlock. 3" black finish N690Co Cobalt Vanadium stainless blade with thumb slot and extended tang. Dark earth G-10 handles with finger ring. Reversible black finish stainless pocket clip. Made in the USA.

4" closed lockback. 3" N690Co Cobalt Vanadium stainless blade with dual thumb studs. Black G-10 handles. Lanyard hole. Black leather belt sheath. Made in Italy.

4" closed framelock. 3 1/4" satin finish Bohler N690Co stainless drop point blade with flipper. Silver twill G-10 handles. Features titanium spring and stainless lock contact. Stainless pocket clip. Made in Italy.

Daily Assisted Needs. 4 1/2" closed Slip Joint Folder. 2 7/8" satin finish Bohler N690Co stainless drop point blade. Burgundy canvas micarta handles. Stainless pocket clip. Made in Italy.

Daily Assisted Needs. 4 1/2" closed Slip Joint Folder. 2 7/8" satin finish Bohler N690Co stainless drop point blade. Black carbon fiber handles. Stainless pocket clip. Made in Italy.

Daily Assisted Needs. 4 1/2" closed Slip Joint Folder. 2 7/8" satin finish Bohler N690Co stainless drop point blade. Silver Twill G10 handles. Stainless pocket clip. Made in Italy.

Daily Assisted Needs. 4 1/2" closed Slip Joint Folder. 2 7/8" satin finish Bohler N690Co stainless wharncliff blade. Burgundy canvas micarta handles. Stainless pocket clip. Made in Italy.

Daily Assisted Needs. 4 1/2" closed Slip Joint Folder. 2 7/8" satin finish Bohler N690Co stainless wharncliff blade. Black carbon fiber handles. Stainless pocket clip. Made in Italy.

Daily Assisted Needs. 4 1/2" closed Slip Joint Folder. 2 7/8" satin finish Bohler N690Co stainless wharncliff blade. Green G-10 handles. Stainless pocket clip. Made in Italy.

Daily Assisted Needs. 4 1/2" closed Slip Joint Folder. 2 7/8" satin finish Bohler N690Co stainless wharncliff blade. Silver Twill G10 handles. Stainless pocket clip. Made in Italy.

4 1/4" closed framelock. 3" satin finish N690Co stainless drop point blade with thumb slot. Titanium front handle and frame. Lanyard hole. Titanium pocket clip. Made in Italy.

4 1/4" closed framelock. 3" stonewash N690Co stainless drop point blade with thumb slot. Carbon fiber front handle with titanium frame. Lanyard hole. Titanium pocket clip. Made in Italy.

Overall: 8.625"; Blade: 4" | N690Co Stainless | Standard Edge | Stonewash Finish; Handle: Black | Micarta; Other Info: Full Tang | Lanyard Hole | Thumb Ridge. Finger groove. Black Kydex sheath. Boxed. Made in Italy.

Overall: 8.625"; Blade: 4" | N690Co Stainless | Standard Edge; Handle: Black | Micarta; Other Info: Full Tang | Lanyard Hole. Black PVD coated blade. Finger groove. Black Kydex sheath. Boxed. Made in Italy.

Type: Neck Knives; Overall: 4.5"; Blade: 2" | N690Co Stainless | Standard Edge | Stonewash Finish; Handle: Black | Micarta; Other Info: Full Tang | Lanyard Hole | Thumb Ridge. Finger grooved handle. Black Kydex neck sheath with ball chain lanyard. Boxed. Made in Italy.

Type: Neck Knives; Overall: 4.5"; Blade: 2" | N690Co Stainless | Standard Edge; Handle: Black | Micarta; Other Info: Full Tang | Lanyard Hole | Thumb Ridge. Black PVD coated blade. Finger grooved handle. Black Kydex neck sheath with ball chain lanyard. Boxed. Made in Italy.

11 1/2" overall. 5 1/2" satin finish Bohler N690 steel blade with lashing hole. Full tang. Comes with two different handles: one in santos rosewood with brown leather lanyard and one in forprene with black nylon cord lanyard. Brown Italian leather belt sheath with sharpener and stainless marlin spike. Made in Italy.

11 1/2" overall. 6 1/2" partially serrated Bohler N690 steel blade with Mil-C-13924 burnishing. Full tang. Black forprene handle with knuckle guard and glass breaker end. Desert tan nylon belt sheath with leg strap attachment. Made in Italy.

Closed: 5.25"; Blade: 3" | N690Co Stainless | Standard Edge | Stonewash Finish; Handle: Black | G-10; Other Info: Thumb Slot | Thumb Ridge | Extended Tang | Pocket Clip. 1" finger ring pommel. Boxed. Made in China.

Overall: 5.5"; Blade: 1.5" | N690Co Stainless | Standard Edge | Satin Finish; Handle: Stainless; Other Info: Stonewash finish handle with finger ring. Black Kydex sheath with clip. Boxed. Made in Italy.

Overall: 7.5"; Blade: 3.25" | N690Co Stainless | Standard Edge | Black Stonewash Finish; Handle: Black | G-10; Other Info: Full Tang | Thumb Ridge. Finger ring pommel. Black Kydex sheath. Boxed. Made in Italy.

Overall: 9.5"; Blade: 4.25" l Bohler N690 Stainless l Standard Edge; Handle: Black; Other Info: Lanyard Hole l Full Tang. MIL-C-13924 burnished tanto blade. Forprene handle with glass breaker. Black molded sheath can be worn vertical, horizontal, or oblique. Single automatic pressure activated security lock. Boxed. Made in Italy.

Overall: 8.5"; Blade: 4.25" l Bohler N690 Stainless l Standard Edge; Handle: Black; Other Info: Thumb Ridge l Full Tang l Lanyard Hole. MIL-C-13924 burnished drop point blade. Forprene handle with glass breaker. Black molded sheath can be worn vertical, horizontal, or oblique. Single automatic pressure activated security lock. Boxed. Made in Italy.

Type: Linerlock; Closed: 5.75"; Blade: 4.5" l Bohler N690 Stainless l Standard Edge l Stonewash Finish; Handle: Black; Other Info: Anticorodal anodized aluminum handles. Boxed. Made in Italy.

Closed: 3.75"; Blade: 3" l Bohler N690 Stainless l Standard Edge; Handle: Black; Other Info: MIL-C-13924 burnished blade. Anticorodal anodized aluminum handles. Boxed. Made in Italy.

Closed: 3.75"; Blade: 3" l Bohler N690 Stainless l Standard Edge l Stonewash Finish; Handle: Black; Other Info: Anticorodal anodized aluminum handles. Boxed. Made in Italy.

Overall: 12.125"; Blade: 7" l Bohler N690 Stainless l Standard Edge; Handle: Black; Other Info: Lanyard Hole l Full Tang. MIL-C-13924 burnished blade. Forprene handle with glass breaker. Black nylon belt sheath with leg strap. Boxed. Made in Italy.

Overall: 12"; Blade: 6.75" | Bohler N690 Stainless | Standard Edge; Handle: Black; Other Info: Full Tang | Lanyard Hole. Tanto blade with MIL-C-13924 burnishing. Black Forprene handles. Black nylon belt sheath. Boxed. Made in Italy.

Closed: 5"; Blade: 3.5" | N690Co Stainless | Standard Edge; Handle: Black | G-10; Other Info: Extended Tang | Lanyard Hole | Pocket Clip | Thumb Ridge. Black cerakote finish drop point blade. Glass breaker. Black zippered storage pouch. Boxed. Made in Italy.

Closed: 5"; Blade: 3.75" | N690 Stainless | Standard Edge | Satin Finish; Handle: Black | Carbon Fiber; Other Info: Extended Tang | Pocket Clip. Black nylon belt pouch. Boxed. Made in Italy.

Closed: 5"; Blade: 3.75" | N690 Stainless | Standard Edge | Satin Finish; Other Info: Extended Tang | Pocket Clip. Titanium carbon fiber handles. Black nylon belt pouch. Boxed. Made in Italy.

Closed: 5.25"; Blade: 3.75" | N690 Stainless | Standard Edge | Stonewash Finish; Handle: Black; Other Info: Extended Tang | Thumb Ridge | Pocket Clip. Black G-10 front handle with stonewash finish stainless back handle. Glass breaker. Black nylon belt pouch. Boxed. Made in Italy.

Closed: 4.25"; Blade: 3" | N690Co Stainless | Standard Edge | Satin Finish; Handle: Brown; Other Info: Extended Tang | Lanyard Hole | Thumb Ridge. Ziricote wood handles. Brown leather sheath. Boxed. Made in Italy.

Closed: 6.75"; Blade: 3.5" | N690 Stainless | Standard Edge | Stonewash Finish; Handle: Black; Other Info: Full Tang | Thumb Ridge | Lanyard Hole. Black canvas micarta handles. Brown leather belt sheath. Boxed. Made in the USA.

Overall: 6.75"; Blade: 3.5" | N690 Stainless | Standard Edge | Stonewash Finish; Handle: Green | ; Other Info: Full Tang | Lanyard Hole | Thumb Ridge. Green canvas micarta handles. Brown leather belt sheath. Boxed. Made in the USA.

Overall: 9.125"; Blade: 4.75" | N690 Stainless | Standard Edge | Stonewash Finish; Handle: Black; Other Info: Full Tang | Thumb Ridge | Lanyard Hole. Black canvas micarta handles. Brown leather belt sheath. Boxed. Made in the USA.

Overall: 9.125"; Blade: 4.75" | N690 Stainless | Standard Edge | Stonewash Finish; Handle: Green; Other Info: Full Tang | Lanyard Hole | Thumb Ridge. Green canvas micarta handles. Brown leather belt sheath. Boxed. Made in the USA.

Type: Neck Knives; Overall: 6"; Blade: 2.75" l Stainless l Standard Edge; Other Info: Lanyard Hole. One piece Bohler N690 stainless construction with desert warfare laser finish. Tan MOLLE compatible rapid release Kydex sheath with paracord strip for neck carry. Boxed. Made in Italy.

Overall: 14.5"; Blade: 9.5" l N690Co Stainless l Standard Edge; Handle: Tan l Rubber; Other Info: Lanyard Hole l Thumb Ridge. Bronze finish kukri blade with lashing hole. Tan Forprene handle. Heavy duty nylon sheath with belt loop and leg straps. Boxed. Made in Italy.

Closed: 4.5"; Blade: 3.375" | N690Co Stainless | Standard Edge; Handle: Black | G-10; Other Info: Thumb Stud(s) | Pocket Clip | Lanyard Hole. Black Cerakote blade. Boxed. Made in Italy.

Closed: 4.5"; Blade: 3.375" | N690Co Stainless | Standard Edge | Stonewash Finish; Handle: Black | G-10; Other Info: Lanyard Hole | Pocket Clip | Thumb Stud(s). Boxed. Made in Italy.

Closed: 4.5"; Blade: 3.375" | N690Co Stainless | Standard Edge; Handle: Tan | G-10; Other Info: Lanyard Hole | Pocket Clip | Thumb Stud(s). Black Cerakote blade. Made in Italy.

Closed: 4.5"; Blade: 3.375" | N690Co Stainless | Standard Edge | Stonewash Finish; Handle: Tan | G-10; Other Info: Lanyard Hole | Thumb Stud(s) | Pocket Clip. Boxed. Made in Italy.

Type: Neck Knives; Overall: 6"; Blade: 2.75" | Bohler N690 Stainless | Standard Edge | Black Finish; Handle: Black | Stainless; Other Info: Lanyard Hole. Tanto blade with fuller groove. Black Kydex sheath with paracord lanyard. Boxed. Made in Italy.

Closed: 4.25"; Blade: 3" | N690 Stainless | Standard Edge | Mirror Polish Finish; Handle: Stag; Other Info: Tri-folding design. Spear point blade. Handle swings, separates, and transforms the knife into a fixed blade design. Includes polishing cloth. Boxed. Made in Italy.

Overall: 6"; Blade: 2.75" - Bohler N690 Stainless - Standard Edge - Stonewash Finish; Handle: Sterling Silver; Other Info: Lanyard Hole. Tanto blade with fuller groove. Stonewash finish handle. Black Kydex sheath with paracord lanyard. Boxed. Made in Italy.

Overall: 6.75"; Blade: 2.75" - Bohler N690 Stainless - Standard Edge; Handle: Stainless; Other Info: One piece Desert Warfare finish construction. Finger ring. Desert tan Kydex sheath with paracord lanyard. Boxed. Made in Italy.

Overall: 8.25"; Blade: 4" - Bohler N690 Stainless - Standard Edge; Handle: Black; Other Info: Lanyard Hole. Mil-C-13924 burnished tanto blade with lashing hole. Black Forprene handle. Black nylon belt sheath. Boxed. Made in Italy.

Type: Linerlock; Closed: 5.5"; Blade: 3" - Bohler N690 Stainless - Partially Serrated Edge; Handle: Black - Aluminum; Other Info: Extended Tang - Pocket Clip. Mil-C-13924 burnished tanto blade. Anticorodal anodized handles. Integrated belt cutter and glass breaker. Boxed. Made in Italy.