Knives with CTS-BD1 Steel Blades

4 5/8" closed. 3 3/8" CTS-BD1 stainless blade with thumb hole pull and thumb ridge. Ball Bearing Lock blade locking mechanism. Blue translucent fiberglass reinforced co-polymer handles. Features Bi-Directional Texturing. Lanyard hole. Stainless wire pocket clip. Made in the USA.

4 5/8" closed. CTS-BD1 stainless blade with thumb hole pull and thumb ridge. Ball bearing Lock blade locking mechanism. Black fiberglass reinforced co-polymer handles with Bi-Directional Texturing. Lanyard hole. Stainless wire pocket clip. Made in the USA.

4 1/8" closed non-locking folder. BD-1 stainless leaf shaped blade with thumb hole. Black FRN handles. The blade is held open by a notched-joint at the knife's pivot. When closing the blade the notch produces roughly twenty-pounds of resistance, functionally similar to traditional slip-joint pen knives. Developed for the UK market where there are strict restrictions about blade locking mechanisms. Reversible stainless pocket clip. Made in the USA.

4 1/8" closed non-locking folder. BD-1 stainless drop point blade with thumb hole. Black FRN handles. The blade is held open by a notched-joint at the knife's pivot. When closing the blade the notch produces roughly twenty-pounds of resistance, functionally similar to traditional slip-joint pen knives. Developed for the UK market where there are strict restrictions about blade locking mechanisms. Reversible stainless pocket clip. Made in the USA.

4 1/2" closed linerlock. 3 3/8" CTS-BD1 stainless modified clip blade with thumb slot. Textured black G-10 handles. Lanyard hole. Four-way reversible stainless pocket clip. Made in China.

4 1/2" closed. 3 1/4" black DLC finish BD-1 steel blade with thumb hole. Lightweight black FRCP (fiberglass reinforced co-polymer) handles. Oversized lanyard hole. Reversible black finish wire pocket clip. Made in the USA.

7 7/8" overall. 4 1/8" satin finish CTS-BD1 stainless Wharncliffe blade with thumb circle. Full tang. Black G-10 handles. Lanyard hole. Custom molded Boltaron sheath with G-clip attachment. Made in Taiwan.

4.5" closed. 3.25" satin finish CTS-BD1 stainless blade. Gray textured G10 handle. Thumb pull. Lanyard hole. Pocket clip. Boxed. Made in China.

Closed: 4"; Blade: 3" l BD1 Stainless l Standard Edge l Satin Finish; Handle: Tan l G10; Other Info: Thumb Ridge l Extended Tang l Pocket Clip. Boxed. Made in China.

Closed: 4"; Blade: 3" l BD1 Stainless l Standard Edge l Black Finish; Handle: Black l G10; Other Info: Extended Tang l Thumb Ridge l Pocket Clip. Boxed. Made in China.

2" closed. 1.13" stonewash finish CTS-BD1 stainless sheepsfoot blade. Black aluminum handle. Thumb pull. Lanyard hole. Double bevel saber ground blade. Designed to replicate the look, size, and convenience of a military dog tag. Boxed. Made in Taiwan.

4.13" closed. 2.75" satin finish CTS-BD1 stainless blade. Gray G10 handle. Lanyard hole. Pocket clip. Thumb pull. Boxed. Made in China.

4.5" closed. 3.25" stonewash finish CTS-BD1 stainless blunt tip blade. Red G10 handle. Pocket clip. Boxed. Made in the USA.

4.75" closed. 3.25" satin finish CTS-BD1 stainless blade. Silver checkered titanium handle. Extended tang. Thumb stud. Pocket clip. Boxed. Made in China.

15.25" overall. 10" satin finish CTS-BD1 stainless blade. Stainless bolster(s). FDA approved black resin and linen canvas micarta handle. Boxed. Made in Japan.

14.25" overall. 9" satin finish serrated CTS-BD1 stainless blade. Stainless bolster(s). FDA approved black resin and linen canvas micarta handle. Boxed. Made in Japan.

13.5" overall. 8.5" satin finish CTS-BD1 stainless blade. Stainless bolster(s). FDA approved black resin and linen canvas micarta handle. Boxed. Made in Japan.

6.5" overall. 3.5" satin finish CTS-BD1 stainless blade. Stainless bolster(s). FDA approved black resin and linen Canvas Micarta handle. Boxed. Made in Japan.

12.5" overall. 7.25" satin finish CTS-BD1 stainless blade. Stainless bolster(s). Stainless pommel. FDA approved black resin and linen canvas micarta handle. Boxed. Made in Japan.

10.25" overall. 6" satin finish CTS-BD1 stainless blade. Stainless bolster(s). FDA approved black resin and linen Canvas Micarta handle. Boxed. Made in Japan.

14.5" overall. 9.5" satin finish CTS-BD1 stainless blade. Stainless bolster(s). FDA approved red resin and linen canvas micarta handle. Boxed. Made in Japan.

Satin finish CTS-BD1 stainless blade. Stainless bolster(s). FDA approved red resin and linen canvas micarta handle. Boxed. Made in Japan.

10.5" overall. 6" satin finish CTS-BD1 stainless blade. Stainless bolster(s). FDA approved red resin and linen canvas micarta handle. Boxed. Made in Japan.

4.25" closed. 3" satin finish CTS-BD1 stainless blade. Black bi-directional texture FRN handle. Thumb pull. Lanyard hole. Pocket clip. Boxed.

May not be sold through Fulfillment By Amazon (FBA). Made in USA.

4.25" closed. 3" satin finish serrated CTS-BD1 stainless blade. Black bi-directional texture FRN handle. Thumb pull. Pocket clip. Lanyard hole. Boxed. Made in the USA.

Dragon Storm Series. 7" overall. 3.5" CTS-BD1 stainless blade. Black G10 handle. Full tang. Acid etched blade. Mosaic pin. Boxed. Made in Japan.

10.5" overall. 5.5" CTS-BD1 stainless blade. Black G10 handle. Full tang. Acid etched blade. Mosaic pin. Boxed. Made in Japan.

12.5" overall. 7.5" satin finish CTS-BD1 stainless blade. Black G10 handle. Full tang. Boxed. Made in Japan.

13.25" overall. 8.5" CTS-BD1 stainless blade. Black G10 handle. Full tang. Acid etched blade. Mosaic pin. Boxed. Made in Japan.

14" overall. 9" CTS-BD1 stainless blade. Black G10 handle. Acid etched blade. Mosaic pin. Boxed. Made in Japan.

14.5" (36.83cm) overall. 9" (22.86cm) satin finish CTS-BD1 stainless blade. Stainless bolster(s). FDA approved red resin and linen canvas micarta handle. Boxed.

Cannot be sold -Fulfilled by Amazon-. Made in Japan.

14.5" (36.83cm) overall. 9" (22.86cm) satin finish CTS-BD1 stainless blade. Stainless bolster(s). FDA approved black resin and linen canvas micarta handle. Boxed. Made in Japan.

4.88" closed. 3.25" black oxide coated CTS-BD1 stainless blade. Black textured titanium handle. Thumb stud. Pocket clip. Extended tang. The Delta Lock forms a V-shaped cutout that interfaces with four different surfaces on the tang, preventing movement in any direction. The point of the tang that rests in the bottom of the V doubles as a glass-breaker when the blade is closed. Boxed. Made in China.

4.25" (10.8cm) closed. 3" (7.62cm) black finish CTS-BD1 stainless blade. Black bi-directional texture FRN handle. Lanyard hole. Pocket clip. Thumb pull. Boxed. Made in the USA.

4.25" (10.8cm) closed. 3" (7.62cm) black DLC coated serrated CTS-BD1 stainless blade. Black bi-directional texture FRN handle. Thumb pull. Lanyard hole. Pocket clip. Boxed. Made in the USA.

8.63" (21.92cm) overall. 4.25" (10.8cm) satin finish CTS-BD1 stainless blunt tip blade. Black polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.63" (21.92cm) overall. 4.25" (10.8cm) satin finish CTS-BD1 stainless blunt tip blade. Green polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.63" (21.92cm) overall. 4.25" (10.8cm) satin finish CTS-BD1 stainless blade. Red polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.63" (21.92cm) overall. 4.25" (10.8cm) satin finish CTS-BD1 stainless blade. Yellow polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.63" (21.92cm) overall. 4.25" (10.8cm) satin finish serrated CTS-BD1 stainless blunt tip blade. Black polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.63" (21.92cm) overall. 4.25" (10.8cm) satin finish serrated CTS-BD1 stainless blunt tip blade. Red polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.75" (22.23cm) overall. 4.5" (11.43cm) satin finish CTS-BD1 stainless blade. Black polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.75" (22.23cm) overall. 4.5" (11.43cm) satin finish CTS-BD1 stainless blade. Green polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.75" (22.23cm) overall. 4.5" (11.43cm) satin finish CTS-BD1 stainless blade. Red polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.75" (22.23cm) overall. 4.5" (11.43cm) satin finish CTS-BD1 stainless blade. Yellow polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.75" (22.23cm) overall. 4.5" (11.43cm) satin finish serrated CTS-BD1 stainless blade. Red polypropylene handle. Dishwasher safe. Round hole. Hang packaged. Made in the USA.

8.63" (21.92cm) overall. 4.25" (10.8cm) satin finish serrated CTS-BD1 stainless blunt tip blade. Green polypropylene handle. Round hole. Hang packaged. Made in USA.

8.63" (21.92cm) overall. 4.25" (10.8cm) satin finish serrated CTS-BD1 stainless blunt tip blade. Yellow polypropylene handle. Round hole. Hang packaged. Made in USA.

8.75" (22.23cm) overall. 4.5" (11.43cm) satin finish serrated CTS-BD1 stainless blade. Black polypropylene handle. Dishwasher safe. Round hole. Clam packed. Made in USA.

8.75" (22.23cm) overall. 4.5" (11.43cm) satin finish serrated CTS-BD1 stainless blade. Yellow polypropylene handle. Round hole. Hang packaged. Made in USA.

8.75" (22.23cm) overall. 4.5" (11.43cm) satin finish serrated CTS-BD1 stainless blade. Green polypropylene handle. Dishwasher safe. Round hole. Boxed. Made in USA.

Murray Carter Collection. 8.88" (22.56cm) overall. 4.63" (11.76cm) satin finish CTS-BD1 stainless blade. Black G10 handle. Blade features Murray Carter's signature "Carter Elbow," a distinctive taper from the spine to the point that reinforces the blade's tip. Octagonal handle. Boxed. Made in Japan.

Murray Carter Collection. 11" (27.94cm) overall. 6.25" (15.88cm) satin finish CTS-BD1 stainless blade. Black G10 handle. Blade features Murray Carter's signature "Carter Elbow," a distinctive taper from the spine to the point that reinforces the blade's tip. Octagonal handle. Boxed. Made in Japan.

Murray Carter Collection. 12.13" (30.81cm) overall. 7.25" (18.42cm) satin finish CTS-BD1 stainless blade. Black G10 handle. Blade features Murray Carter's signature "Carter Elbow," a distinctive taper from the spine to the point that reinforces the blade's tip. Octagonal handle. Boxed. Made in Japan.

Murray Carter Collection. 12.63" (32.08cm) overall. 7.63" (19.38cm) satin finish CTS-BD1 stainless blade. Black G10 handle. Blade features Murray Carter's signature "Carter Elbow," a distinctive taper from the spine to the point that reinforces the blade's tip. Octagonal handle. Boxed. Made in Japan.

Murray Carter Collection. 15.38" (39.07cm) overall. 10.13" (25.73cm) satin finish CTS-BD1 stainless blade. Black G10 handle. Blade features Murray Carter's signature "Carter Elbow," a distinctive taper from the spine to the point that reinforces the blade's tip. Octagonal handle. Boxed. Made in Japan.