Handcuff Cases & Pouches

Black ballistic nylon. Fits chain handcuffs. Integral spare key retention pocket. Hang packaged. Cuffs sold separately. Made by ASP in the USA.

Black ballistic nylon construction. Fits chain and hinged handcuffs. Integral spare key retention pocket. Hang packaged. Cuffs sold separately. Made by ASP in the USA.

Black leather. Fits chain or hinged handcuffs. Integral spare key retention pocket. Hang packaged. Cuffs sold separately. Made by ASP in the USA.

Black basketweave leather. Fits chain or hinged handcuffs. Integral spare key retention pocket. Hang packaged. Cuffs sold separately. Made by ASP in the USA.

Black leather construction. Secure restraints with a protective Velcro cover and elastic side wall technology. Spare pentagon key. Concealed key pocket. Hang packaged. Integral spare key retention pocket. Hang packaged. Cuffs sold separately. Made by ASP in the USA.

Case easily clips to a service belt and holds two of the Tri-Fold disposable restraints. Molded black polymer body with two divided compartments and button drain hole. Fixed belt loop with slide adjustment, slide lock. MOLLE compatible. Made by ASP in the USA.

Snap-Loc belt loop. Rapid deployment. Lightweight. Designed for ASP's Ultra Cuffs. Includes 2 different floor pads: one for Chain Ultra Cuffs and one for Hinge Ultra Cuffs. Indexed slide track and bar that adjusts to fit all common duty belt and dress belt widths or MOLLE gear. Spare handcuff key (included) stores in its own back compartment. Clam packed. Made by ASP in the USA.

Holds one pair handcuffs. Smooth. Leather construction. Color: Black. Bulk packed. Made in Mexico.

Holds one pair handcuffs. Leather construction. Color: Black. Bulk packed. Made in Mexico.

Holds one pair handcuffs. Leather construction. Color: Black. Bulk packed. Made in Mexico.

Fixed buckle and Velcro double locking. Velcro pocket key. Multi-function belt clamp. Sliding adjustment block fits various belt widths for good stability. Locking block design for security. 360 degree rotation design. Quick-switch belt mount. Dimensions: 4.3" x 5.3" x 2.5". Nylon construction. Color: Black. Hang packaged. Made in China.

Dimensions: 4.75" x 3.13" x 6.7". 2.13" belt width. Nylon construction. Color: Black. Hang packaged. Made in China.

Black nylon construction. Includes belt loop. Holds one pair of standard size handcuffs. Hang packaged. Made in China.

The Zero9 ASP Cuff Case is designed to carry the original hinged or chain ASP cuffs in any configuration and hold them securely until needed. Fits the original ASP handcuffs. Does not fit Ultra/Forged or Sentry Cuffs. Made in USA.

Excellent for on the job concealed carry. Adjustable tension design to accept most magazines and chain handcuffs. Custom retention, lightweight and low profile design. Made in Israel.

Excellent for on the job concealed carry. Adjustable tension design to accept most magazines and chain handcuffs. Custom retention, lightweight and low profile design. Made in Israel.

Rugged case for your handcuffs, designed to be compatible with as many brands and styles of cuffs as possible! Zero9 Standard Cuff Case for non-ASP handcuffs, designed to fit most brands of standard hinged or chain handcuffs currently on the market. The standard cuff case has a retention screw to get a better fit and feel on your draw and re-holster. The oversized handcuffs do not fit these cases due to their extremely oversized blades. Adjustable retention lanyard included. Fits most standard steel handcuffs (S&W, Peerless, etc). Does not fit oversized handcuffs or leg chains. Made in USA.

The Model 7300 AccuMold Covered Handcuff Case is made from a trilaminate construction with Coptex knit lining. Will hold one pair of standard handcuffs with hook and loop or hidden snap closure. Dual belt loop conveniently fits 2 in. (50 mm) or 2.25 in. (58 mm) duty belts. Handcuff Fit: Hiatt 2010-H Handcuff Fit: Hiatt 2015-H Handcuff Fit: Peerless Model 1700C Handcuff Fit: Peerless Model 730C Handcuff Fit: Peerless Model 750C Handcuff Fit: Smith & Wesson 100 Chain

Rugged case for your handcuffs, designed to be compatible with as many brands and styles of cuffs as possible! Zero9 Standard Cuff Case for Non-ASP handcuffs, designed to fit most brands of standard hinged or chain handcuffs currently on the market. The standard cuff case has a retention screw to get a better fit and feel on your draw and re-holster. The oversized handcuffs do not fit these cases due to their extremely oversized blades. Adjustable retention lanyard included. Fits most standard steel handcuffs (S&W, Peerless, etc). Does not fit oversized handcuffs or leg chains. Made in USA.

The Model 7934 AccuMold Elite Open Handcuff Case features a pull through style for easy access to the cuffs. Made of trilaminate construction with a synthetic leather-like finish. A dual web belt loop design conveniently accommodates both 2 in. (50 mm) and 2.25 in. (58 mm) belts widths. Made in Mexico.

Rugged case for your handcuffs, designed to be compatible with as many brands and styles of cuffs as possible! Zero9 Standard Cuff Case for non-ASP handcuffs, designed to fit most brands of standard hinged or chain handcuffs currently on the market. The standard cuff case has a retention screw to get a better fit and feel on your draw and re-holster. The oversized handcuffs do not fit these cases due to their extremely oversized blades. Adjustable retention lanyard included. Fits most standard steel handcuffs (S&W, Peerless, etc). Does not fit oversized handcuffs or leg chains. Made in USA.

The Zero9 ASP Cuff Case is designed to carry the original hinged or chain ASP cuffs in any configuration and hold them securely until needed. Fits the original ASP handcuffs. Does not fit Ultra/Forged or Sentry Cuffs. Made in USA.

The Model 7334 AccuMold Open Handcuff Case features a pull through style for easy access to the cuffs. Made of AccuMold trilaminate construction with ballistic weave exterior and Coptex lining. A dual web belt loop design conveniently accommodates both 2 in. (50 mm) and 2.25 in. (58 mm) belts widths. Made in Mexico.

The Model 7300 AccuMold Covered Handcuff Case is made from a trilaminate construction with Coptex knit lining. Will hold one pair of standard handcuffs with hook and loop or hidden snap closure. Dual belt loop conveniently fits 2 in. (50 mm) or 2.25 in. (58 mm) duty belts. Handcuff Fit: Peerless Model 801 Hinged Handcuff Fit: ASP Model 100 Handcuff Fit: Hiatt 2050-H Handcuff Fit: Hiatt 2075-H Handcuff Fit: Peerless Model 801C Handcuff Fit: Peerless Model 802C Handcuff Fit: Peerless Model 850C

The Exo-S Case is a sleek, lightweight, rapid-access carrier, custom-designed specifically for ASP Sentry Cuffs. It gets its name from a lightweight, exoskeleton-like design that adds virtually no bulk, and has no covers, flaps, or straps to get in the way. Also, unlike any other handcuff case, the Exo-S holds the handcuffs in a proper, pre-loaded ''ready'' configuration, preventing the bows from being moved out of position while carrying. To deploy handcuffs, simply release the slide lock and remove the restraints. To replace, just seat the bottom of the cuffs into the rubber-cushioned/noise-dampened recess, and re-engage the slide lock. The Exo-S Case features our exclusive Snap-Loc belt loop, which attaches anywhere on the belt without having to thread or unthread other duty gear. It features an indexed slide track and bar that adjusts to fit all common duty belt and dress belt widths, or MOLLE gear. A spare handcuff key stows in its own compartment on the back. Made in China.

The Model 7317 AccuMold Double Handcuff holds two pairs of standard handcuffs or similar. Made from molded and contoured trilaminate construction with Coptex knit lining. The 7317 is available with hook and loop or hidden snap closure and conveniently fits 2 in. (50 mm) or 2.25 in. (58 mm) duty belts. Handcuff Fit: Hiatt 2010-H Handcuff Fit: Hiatt 2015-H

Phoenix Advantage-Plus is the best looking nylon gear ever, and built to last. Abrasion and moisture resistant. Hard shell molded. Snap closure. Fits belt up to 2 1/4 in. Made in USA.

The Model 7300 AccuMold Covered Handcuff Case is made from a trilaminate construction with Coptex knit lining. Will hold one pair of standard handcuffs with hook and loop or hidden snap closure. Dual belt loop conveniently fits 2 in. (50 mm) or 2.25 in. (58 mm) duty belts. Handcuff Fit: Hiatt 2010-H Handcuff Fit: Hiatt 2015-H Handcuff Fit: Peerless Model 1700C Handcuff Fit: Peerless Model 730C Handcuff Fit: Peerless Model 750C Handcuff Fit: Smith & Wesson 100 Chain Made in Mexico.

Our Duty line of TACOs functions the same as the originals, but feature sleeker fronts and hidden bungee, which is woven internally. This pouch will hold most handcuffs, field compasses, tins and more. Made in USA.

The 090 Open Top Handcuff Case makes grabbing a pair of handcuffs easy and efficient. Constructed of durable SafariLaminate material, the cuff case fits chain or hinged handcuffs and is designed for 2.25 in. (58 mm) duty belts. Made in Mexico.

The Zero9 ASP Cuff Case is designed to carry the original hinged or chain ASP cuffs in any configuration and hold them securely until needed. Fits the original ASP handcuffs. Does not fit Ultra/Forged or Sentry Cuffs. Made in USA.

The Zero9 ASP Cuff Case is designed to carry the original hinged or chain ASP cuffs in any configuration and hold them securely until needed. Fits the original ASP handcuffs. Does not fit Ultra/Forged or Sentry Cuffs. Made in USA.

Comfortably and securely carry your handcuffs with the 5.11 Tactical Sierra Bravo Handcuff Pouch. This pouch has become the new standard in utility storage for law enforcement professionals, tactical operators, and private security personnel worldwide. Designed to provide maximum durability in any environment and reliable accessibility while on the move, this lightweight pouch is precision engineered for compatibility with all standard Law Enforcement utility formats. A hardened 1680D nylon exterior layer absorbs shock and sheds moisture, while a high density interior minimizes rattle and keeps your gear stable and secure.

The 90 Handcuff Case is designed to fit either chain or hinge cuffs, depending on model. Constructed of durable SafariLaminate material, this cuff case is designed for 2.25 (58mm) duty belts and available with chrome, brass, or hidden snap. Made in Mexico.

This belt mount handcuff pouch will hold almost any brand of handcuff. Also ideal for dip cans and other similar products. Made in USA.

This belt mount handcuff pouch will hold almost any brand of handcuff. Also ideal for dip cans and other similar products. Made in USA.

Rugged case for your handcuffs, designed to be compatible with as many brands and styles of cuffs as possible! Zero9 Standard Cuff Case for non-ASP handcuffs, designed to fit most brands of standard hinged or chain handcuffs currently on the market. The standard cuff case has a retention screw to get a better fit and feel on your draw and re-holster. The oversized handcuffs do not fit these cases due to their extremely oversized blades. Adjustable retention lanyard included. Fits most standard steel handcuffs (S&W, Peerless, etc). Does not fit oversized handcuffs or leg chains. Made in USA.

The Zero9 ASP Cuff Case is designed to carry the original hinged or chain ASP cuffs in any configuration and hold them securely until needed. Fits the original ASP handcuffs. Does not fit Ultra/Forged or Sentry Cuffs. Made in USA.

5531 Quick Release Handcuff Case combines a professional look and design with the benefits of a quick release case. The quick release snap allows an easy quick draw action that is a necessity when a situation starts to get out of control. Top Grain Leather Case fits 2 1/4 belt. Made in USA.

When you need your handcuffs, you can count on our Flex Handcuff Pouch. Constructed from durable 500D nylon, the Flex Cuff Pouch is capable of carrying two sets of standard or hinged cuffs. The Flex Handcuff Pouch harnesses the 5.11 FLEX-HT Mounting System for easy attachment. A hook-and-loop closure and elastic side compression keep your cuffs secure throughout your shift. And when that moment arrives, easy-grip pull tabs quickly open the pouch, ensuring that your cuffs are always ready for duty. Imported.

The Model 7900 AccuMold Elite Covered Handcuff Case is made from a trilaminate construction with a synthetic leather-like finish. Will hold one pair of standard handcuffs with chrome, brass or hidden snap closure. Dual belt loop conveniently fits 2 in. (50 mm) or 2.25 in. (58 mm) duty belts. Handcuff Fit: One pair of standard chain handcuffs Handcuff Fit: Hiatt 2003-H Handcuff Fit: Hiatt 2005-H Handcuff Fit: Peerless Model 730C Handcuff Fit: Peerless Model 750C Handcuff Fit: Peerless 700C Handcuff Fit: Smith & Wesson 100 Chain

Rugged case for your handcuffs, designed to be compatible with as many brands and styles of cuffs as possible! Zero9 Standard Cuff Case for Non-ASP handcuffs, designed to fit most brands of standard hinged or chain handcuffs currently on the market. The standard cuff case has a retention screw to get a better fit and feel on your draw and re-holster. The oversized handcuffs do not fit these cases due to their extremely oversized blades. Adjustable retention lanyard included. Fits most standard steel handcuffs (S&W, Peerless, etc). Does not fit oversized handcuffs or leg chains. Made in USA.