Flexcut Wood Carving Tools

4 1/4" closed three blade multi-tool with detail, roughing blade and mini cutting blade. Blades lock in the open position. Black aluminum handles with cherry wood inlay. Hang packaged. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

Includes: Cutting Knife - Multi-purpose knife for roughing out and general carving; Detail Knife - The pointed tip allows for working in tight areas of detail; Pelican Knife - The rounded blade cuts in hollow areas and can be used to make rolled, slicing cuts. The relieved back allows the tip to turn in a small radius; Mini Pelican Knife - Ultra thin blade can create extremely fine detail without disturbing adjacent work. Ergonomic wood handles. High carbon steel blades. Comes with 4 pocket tool roll. Hang packaged. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

Includes KN15 Chip Carving Knife, KN20 Mini Chip Carving Knife, and KN1 1Skew Knife. Ergonomic wood handles. High carbon steel blades. Hang packaged. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

This fixed blade knife is 6 1/8" overall. 1 1/2" high carbon steel cutting blade for a wide range of carving projects. Ergonomic wood handle. Hang packaged. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

This fixed blade knife is 6 1/8" overall. 1 1/2" high carbon steel detail blade for close work and small details. Ergonomic wood handle. Hang packaged. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

Two 3 3/4" wood handles. 5" of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can flex to accomodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape. Leather sheath. Bulk packed. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

Includes KN13 Detail Knife, KN27 Mini-Detail Knife, and Flexcut Gold polishing compound. Ergonomic wood handles. High carbon steel blades. Hang packaged. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

Same high quality as other Flexcut knives; but the blades are smaller, to handle the finest detail work. Includes KN20 Mini-Chip Carving Knife, KN19 Mini Pelican Knife, FN27 Mini Detail Knife, and Flexcut Gold polishing compound. Ergonomic wood handles. High carbon steel blades. Hang packaged. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

Includes KN12 Cutting Knife, KN13 Detail Knife, KN14 Roughing Knife, and Flexcut Gold polishing compound. Ergonomic wood handles. High carbon steel blades. Hang packaged. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

Four piece set includes KN12 Cutting Knife, KN13 Detail Knife, FR306 Palm Tool and FR307 Palm Tool. Palm Tools fit comfortably in the palm of your hand. Great for small projects such as caricatures, walking sticks, and tableware. Palm Tools are shorter in length, offering greater control with the cutting edge closer to the controlling hand. Ergonomic wood handles. High carbon steel blades. Hang packaged. Flexcut carving tools are a new breed of wood carving tools created to address the needs of the modern hobbyist and professional. Designed by woodcarvers for woodcarvers, Flexcut features flexible blade shafts with razor sharp cutting edges to give woodcarvers maximum control over each cut. Each blade is precision-machined from high carbon content steel for a hard cutting edge that stays sharp. Each blade is hand-sharpened at the factory and tested before shipping. The tools have ergonomically designed handles that enable long periods of carving without hand fatigue. Made in U.S.A.

This fixed blade knife is 6 1/2" overall. 1 3/4" high carbon steel skewed blade gives the user a different approach to a detail or paring cut. Instead of a perpendicular bevel as found in many detail knives, this instead is slightly skewed. Wood handle shape holds like a pencil or conventional knife. Hang packaged. Made by Flexcut in the USA.

Includes (4) knives - KN12 Cutting Knife, KN13 Detail Knife, KN18 Pelican Knife and KN27 Mini-Detail Knife, and (5) palm tools - FR305 #3 x 3/8" Gouge, FR306 #6 x 5/16" Gouge, FR307 70 deg. x 1/4" V-Tool, FR308 #2 x 5/16" Skew and FR309 #11 x 1/8" Gouge, and wooden storage box. Features high carbon steel blades and wood handles. This set brings together two popular tool sets to give carvers a wide range of capabilities. Includes bonus band aid storage container with five standard sized band aids. Made by Flexcut in the USA.

Includes (6) mallet tools - MC403 #3 x 1"; MC305 #5 x 11/16"; MC208 #7 x 7/16"; MC311 #11 x 1/4"; MC411 #10 x 9/16"; MC360 60 deg. x 3/8" and wooden storage box. Features high carbon steel blades and wood handles. A good sampling of tools to get started on simpler projects. These tools can be used by hand or can be struck with a mallet and will suit the needs of advanced and beginning carvers. Includes bonus band aid storage container with five standard sized band aids. Made by Flexcut in the USA.

Measures 4" x 3 1/4". An easy way for creating and maintaining your carving tool's razor edge. It has been specially molded to allow for polishing and deburring the hard-to-reach areas on the inside of V-tools and gouges as well as the outside edge bevel. Includes a small bar of Flexcut Gold polishing compound that has been specially formulated to apply to the strop like a crayon and quickly polish hardened steels. Detailed instructions. Hang packaged. Made by Flexcut in the USA.

3 1/2" diameter leather wheel. Fits into any standard power drill. Simply apply the included buffing compound to the flat leather wheel and let the drill do the work of bringing your edge up to a polished surface. Removes the wire edge burr from stone sharpening - resulting in a keen razor-sharp edge like you've never had before! Rated for 600-800 RPM. Use for the inside radius of gouges, plane blades, wood chisels, draw knives and other tools. Made by Flexcut in the USA.

3 1/2" diameter leather wheel. Fits into any standard power drill. Simply apply the included buffing compound to the leather wheel and let the drill do the work of bringing your edge up to a polished surface. Contains a V-shaped leather wheel for buffing inside V-tools and gouges along with the flat leather wheel. Removes the wire edge burr from stone sharpening - resulting in a keen razor-sharp edge like you've never had before! Rated for 600-800 RPM. Use for the inside radius of gouges, plane blades, wood chisels, draw knives and other tools. Made by Flexcut in the USA.

Includes (10) high carbon steel razor sharp carving blades - SK329 #1 x 1/4"; SK305 #3 x 3/8"; SK400 #3 x 5/8"; SK401 #5 x 9/16"; SK306 #6 x 5/16"; SK801 #9 x 1.5mm; SK309 #11 x 1/8"; SK408 #11 x 1/4"; SK803 45 deg. x 1mm and SK307 70 deg. x 1/4" profiles; (1) Quick-Change ABS handle; pre-printed leaf carving blank; eleven pocket tool roll; sharpening and carving manual. Hang packaged. Ideal for wood carving; texturing; surfaces; foam; linoleum block; melons and soap. Made by Flexcut in the USA.

Includes (16) high carbon steel carving knives - SK406 #1 x 5/8"; SK407 #2 x 9/16"; SK323 #3 x 1/4"; SK700 #3 x 7/8"; SK601 #5 x 1/8"; SK446 #6 x 1/2"; SK428 #8 x 1/4"; SK402 #8 x 3/8"; SK702 #8 x 11/16"; SK703 #9 x 9/16"; SK602 #11 x 1/16"; SK725 #11X x 3/16"; SK927 #11X x 1/2"; SK317 45 deg. x 5/32"; SK403 70 deg. x 3/8" and SK754 7/8" Back Bent profiles; cutting knife; (2) Quick-Change handles (ABS and Power); SlipStrop with Gold polishing compound; instruction manual and 90m instructional DVD. Includes bonus band aid storage container with five standard sized band aids. Made by Flexcut in the USA.

Includes (5) high carbon steel palm tool carving blades - FR308 #2 x 5/16"; FR305 #3 x 3/8"; FR306 #6 x 5/16"; FR309 #11 x 1/8"; FR307 70 deg. x 1/4" and wooden storage box. The wood handles fit comfortably in the palm; allowing for good control close to your work. Great for those just getting started or those with more experience who like to carve smaller size projects. Includes bonus band aid storage container with five standard sized band aids. Made by Flexcut in the USA.

Includes (9) high carbon steel palm tool carving blades - FR308 #2 x 5/16"; FR305 #3 x 3/8"; FR306 #6 x 5/16"; FR309 #11 x 1/8"; FR307 70 deg. x 1/4"; and wooden storage box. Wood handles. Features the regular palms for detail and the wide format for roughing-out; making this a great collection in one convenient box. Made by Flexcut in the USA.

This fixed blade knife is 12 1/8" overall. 3" high carbon steel draw blade. Developed for fan carving but works great for skinning bark and roughing-off corners. Ergonomic wood handles. Tan leather blade cover sheath. Made by Flexcut in the USA.

Four piece set includes: FR700 #3 x 7/8"; FR701 #6 x 13/16"; FR702 #8 x 11/16"; and FR703 #9 x 9/16". High carbon steel blades. Wood handles fit comfortably in the palm. These super-wide format tools give maximum wood removal with minimum effort. They are designed for carvers with the confidence to hog wastewood off quickly and save roughing-out time. Wooden storage box. Made by Flexcut in the USA.

Designed for extreme detail used in netsuke or caricature carving. These tools have their edges forged down even thinner than our other palm tools. Cutting with these fine edges allows the carver to work extremely close to adjacent detail without crushing wood fibers that can lead to "chipping out." Palm Tools included: FR802 #5 x 2.5 mm, FR800 #9 x 1mm, FR801 #9 x 1.5mm, and FR803 45 deg. x 1mm. Comes in wood storage box. Made by Flexcut in the USA.

Includes four right-handed profiles. Scorps are essentially right-handed gouges designed for carving areas where the full length of a gouge will not fit. Useful for hollowing deep, narrow cavities. Also includes a leather tool roll and a custom molded strop to maintain your razor-sharp edges. Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. Ergonomic wood handle. Hang packaged. Made by Flexcut in the USA.

This fixed blade knife is 5 1/4" overall. 5/8" ultra-thin high carbon steel blade makes unwanted chipping in delicate cuts less likely. Smaller design wood handle is faceted with multiple control points to allow it to be held in a variety of comfortable positions. Hang packaged. Made by Flexcut in the USA.

This fixed blade knife is 6" overall. 1 1/8" high carbon steel curved, scoop style blade similar to a gouge. Used for working in hollows with ease and fast stock removal. Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. Ergonomic wood handle. Hang packaged. Made by Flexcut in the USA.

This fixed blade knife is 5 1/4" overall. 3/4" high carbon steel straight blade. Made from ultra-thin material to not disturb adjacent wood for very delicate cuts. Smaller ergonomic wood handle is faceted with multiple control points to allow it to be held in a variety of comfortable positions. Hang packaged. Made by Flexcut in the USA.

Four Piece Set. Sized for very large stock removal. Handle diameter and steel caliper are twenty percent larger for heavy duty projects. These tools can be used by hand or can be struck with a mallet. Mallet Tools included: MC803 #3 x 2"; MC605 #5 x 1-3/8"; MC711 #10 x 1-1/8"; and MC890 90 deg. x 1-3/8". Comes in wood storage box. Made by Flexcut in the USA.

This set features four micro chisels. Micro Tools included: MT11 1/16" (1.5mm), MT12 1/8" (3mm), MT13 3/16" (5mm), and MT14 1/4" (6mm). Perfect for: miniature and fine detail work, cleaning up ridges created by gouge cuts, cleaning up tight corners and accessing tight spaces. Hang packaged. Made by Flexcut in the USA.

Designed for quickly maintaining a sharp edge. Specially formulated to apply like a crayon. Blend of aluminum and titanium oxide provides a balance between aggressive removal of hardened tool steels and offers a high-color polish. 6 oz. bar. Hang packaged. Made by Flexcut in the USA.

1.5mm Micro Deep U-Gouge. Made by Flexcut in the USA.

Set includes MT 23- 1.5mm; MT24- 2mm; MT25- 3mm; MT26- 4mm. Each tool is 5 3/4" overall with a 1 3/4" high carbon steel blade and wood handle. Used for miniature and fine detail work, cleaning up ridges created by gouge cuts, cleaning up tight corners, accessing tight spaces, and carving fine details such as mouths and eyes. Hang packaged. Made by Flexcut in the USA.

Includes six 1.5mm Profiles: Chisel (FLEXMT11), Skew (FLEXMT15), Sweep, Deep-U, 45° V and 90° V. These tools are designed to handle the extra-fine details often encountered in woodcarving. Perfect for miniatures, cleaning up ridges created by gouge cuts, cleaning up and accessing tight corners, and carving fine details such as mouths and eyes, plus adding texture such as fur and feathers. Hang packaged. Made by Flexcut in the USA.

14 3/4" overall. Wood construction with leather lanyard. 10" x 3" rough leather stropping surface. Reverse side has 10" x 3" smooth leather surface for a high-sheen, razor-sharp finish. Gold polishing compound to remove hardened steels. Hang packaged. Made by Flexcut in the USA.

14 Piece Set includes: RG305 #3 x 3/8"; RG400 #3 x 5/8"; RG300 #3 x 3/4"; RG200 #3 x 1"; RG306 #5 x 5/16"; RG401 #5 x 9/16"; RG301 #5 x 5/8"; RG201 #5 x 7/8"; RG402 #8 x 3/8"; RG302 #8 x 1/2"; RG309 #11 x 1/8"; RG307 70 deg. x 1/4"; RG403 70 deg. x 3/8"; RG203 90 deg. x 11/16". Ideal for roughing out and detailing. Compatible with most reciprocating power tools, and requires no adapters for the following machines: Proxxon; Foredom; Wecheer; Ryobi and MasterCarver. USA Wooden storage box. Made by Flexcut in the USA.

Sloyd Knife. 7.5" overall. 2.88" carbon steel blade. Wood handle. Tan leather belt sheath. Hang packaged. Made by Flexcut in the USA.

This fixed blade knife is 5.5" overall. Stainless blade. Wood handle. Includes MT16 Skew, MT21 Sweep, MT29 Deep-U, MT33 45 degree V, MT41 90 degree V. Clam packed. Made by Flexcut in the USA.

Stainless blade. Features broad, short knob Cherry wood handles in the European tradition. Brass ferrule. Includes: #2 x 5/16" (8mm), #3 x 3/8" (9mm), #3 x 5/8" (16mm), #5 x 9/16" (14mm), #6 x 5/16" (8mm), #8 x 3/8" (10mm), #11 x 1/8" (3mm), 70 degree x 1/4" (6mm), 70 degree x 3/8" (9mm). Wooden storage box. Made by Flexcut in the USA.

This fixed blade knife is 6.75" overall. Cherry wood handle. Deeply curved, single-edged stainless blade is sharpened all the way to the pointed tip. Full tang. Brass ferrule. Clam packed. Made by Flexcut in the USA.

This fixed blade knife is 6.75" overall. 2.25" blade. Cherry wood handle. Brass ferrule. Clam packed. Made by Flexcut in the USA.

This fixed blade knife is 5.5" overall. 1.5" blade. Wood handle. Includes: MT22 Sweep, MT30 Deep-U, MT34 45 degree V, MT38 60 degree V, MT42 90 degree V. Perfect for miniature and fine detail work, cleaning up ridges, tight corners, and carving fine details. Clam packed. Made by Flexcut in the USA.

Includes: FR800 #9 x 1mm; FR801 #9 x 1.5mm; FR802 #5 x 2.5mm; FR803 45 deg. x 1mm. Short, knob cherry wood handles. Polished brass ferrule. Wooden storage box. Made by Flexcut in the USA.