Fixed Blade Knife Sheaths

Black Kydex sheath with belt clip. Substantial drain hole and plenty of clearance for the blade. Bulk packed. Made in the USA.

Orange Kydex sheath with belt clip. Substantial drain hole and plenty of clearance for the blade. Bulk packed. Made in the USA.

Comes with AB 3 clip and 88 BB eyelets. Partially assembled at industry spec so it can be used with multiple belt clips. Comes with detailed instructions. Bulk packed. Made in the USA.

Construction: Kydex; Color: Black; Other Info: Pre-formed DIY sheath kit for 3-4 blades. Comes with an instruction manual and link to a how-to video on YouTube. Some basic tools needed such as heat gun and Kydex forming foam. Bulk Packed. Made in the USA.

Comes with AB 3 clip and 88 BB eyelets. Partially assembled at industry spec so it can be used with multiple belt clips. Comes with detailed instructions. Bulk packed. Color: Tan. Made in the USA.

Construction: Kydex; Color: Black; Other Info: Pre-formed DIY sheath kit for 4-5 blades. Comes with an instruction manual and link to a how-to video on YouTube. Some basic tools needed such as heat gun and Kydex forming foam. Bulk Packed. Made in the USA.

Mount your knife sheath to the holster using the hardware from the belt latch (requires Phillips screwdriver). Height-adjustable Knife may be mounted in any direction. For use with Hoffner Hand Spear or Beast (not included). Bulk Packed. Made in China.

Dimensions: 6.75"; Construction: 550 Paracord; Color: Black; Other Info: For use with Hoffner Beast or Hand Spear. Two quick connect ends. When attached to the butt-end of the handle and the fore-grip of the handle it acts as a hilt to keep your hand from sliding forward. Can also be attached to a sheath for retention. Bulk Packed. NOTE: A lanyard sheath (Beast item ATA42 or Hand Spear item ATA43) will need to be purchased to hold your knife in the sheath with its lanyard. The knife with a lanyard will not fit into the standard sheath. Made in China.

Construction: Polypropylene; Color: Black; Other Info: For use with any Hoffner Knives BEAST model plus the Hand Lanyard (Item: ATA41). Bulk Packed. Made in China.

For Barebones Living Hori Hori Classic. Gray canvas belt sheath. Bulk packed. Made in China.

For Becker knives BKR2 and BKR22. Nylon construction. Color: Black. Bulk packed. Made in the USA.

Made to fit BOP300 Cop Tool. Bulk packed. Knife not included. Black Kydex belt sheath. Bulk packed. Made in Taiwan.

Fits BU102 Woodsman - all versions (4" blade). Black leather construction. Bulk packed. Made in Mexico.

Fits BU103 Skinner - all versions. Black leather construction. Bulk packed. Made in Mexico.

Fits BU105 Pathfinder - all versions. Black leather construction. Bulk packed. Made in Mexico.

Fits most 7.5" fixed blade knives. Will fit BU113 Ranger Skinner. Black leather sheath. Bulk packed. Made in Mexico.

Fits BU119 Special - all versions. Burgundy leather construction. Bulk packed.

Belt sheath made to fit Buck Model 119 or other fixed blade knife with a blade up to 6 1/8" long and 1 1/8" wide. Black leather with Buck logo. Made in Mexico.

Belt sheath made to fit BU119 Special or other fixed blade knife with up to 6 1/8" blade.. Black polyester sheath. Bulk packed. Made in China.

Fits Model 120 General - all versions. Black leather construction. Bulk packed.

Fits most 9" fixed blades. Made to fit BU191 Zipper Guthook. Brown leather sheath. Bulk packed. Made in Mexico.

Sheath. Fits most 8" fixed blades. Made to fit BU390 Omni Hunter. Black polyester sheath. Bulk packed. Made in China.

Sheath. Fits most 7.5" fixed blades. Made to fit BU673 BuckLite Small. Black polyester sheath. Bulk packed. Made in China.

Sheath. Fits most 9" fixed blades. Made to fit BU691 Zipper Guthook. Black polyester sheath. Bulk packed. Made in China.

Fits Tramontina Bush Machete with 18" blade. Single snap retention. Out-the-back design. Swiveling belt loop. 60mil HDPE polymer construction. Color: Black. Bulk packed. Made in USA.

Description coming soon!

Construction: Leather; Color: Brown; Other Info: Vegetable tanned leather construction with "army" size fire striker holder (fits 9.5mm diameter rod). Sheath fits the second generation of Casstrom No.10 knives. Also compatible with the old version of the knife. Bulk Packed. Made in Sweden.

Description coming soon!

Black leather sheath. Bulk packed.

Description coming soon!

Description coming soon!

Description coming soon!

Vegetable tanned leather construction. Fits Lars Falt fixed blade knives. Right hand version. Bulk packed. Made in Sweden.

Vegetable tanned leather construction. Fits Lars Falt fixed blade knives. Left hand version. Bulk packed. Made in Sweden.

8" overall. Includes black cord lanyard. Fits Cuda Pliers and Snips (18825, 18827, 18828, 18829, 18838, 18096, 18112, 18113). Black nylon belt sheath. Clam packed. Made in China.

Measures 11 3/8" overall. Ultralight blue Cuda scale pattern composition belt sheath with drain hole. Reversible loop allows for right or left fit. Sheath also fits Cuda knives 18090, 18830, 18833, 18831, 18832, 18845 and 18853 (sold separately). Hang packaged. Made in China.

Includes: (2) C-Clips; (4) bolts; (4) T-Nuts; (4) washers; (12) spacers. Fits up to 1.75" wide and 0.25" thick belts, straps, MOLLE, etc. Fits the following Cold Steel items: Chaos series (except stiletto model), Nightfall Series, SRK Recon Tanto, Warcraft series, AK-47 Field Knife, Leatherneck series, OSS, Marauder, Trail Master, Laredo Bowie, Drop Forged series, Master Hunter, G.I. Tanto, and Shanghai series. Hang packaged. Made in China.

Includes: (2) C-Clips; (4) bolts; (4) T-Nuts; (4) washers; (12) spacers. Fits up to 1.75" wide and 0.25" thick belts, straps, MOLLE, etc. Fits the following Cold Steel items: Bird & Trout, Bird & Game, Super Edge, Urban Pal, Urban Edge Mini, Tacs Hide Out, Spike series, Double Agent, Safe Makers, Steel Tiger, Counter Tac series, Secret Edge, Pendleton Hunter, Pendleton Mini Hunter, and Drop Forged Push Knife. Hang packaged. Made in China.

Heavy black Cor-Ex construction. Made to fit CS80TPB Perfect Balance Thrower or other similar fixed blade knives with up to 9" blade. Bulk packed. Made in Taiwan.

Heavy black Cor-Ex construction. Made to fit CS80TSB Sure Balance Thrower of other similar double edge daggers with up to 9" blade. Bulk packed. Made in Taiwan.

Made to fit CS07AM18 Latin Style Machete, or will fit similar machetes with 18" blade. Black cordura nylon construction featuring taped and riveted seams, slotted back, double retaining straps, safety toe and generous sized belt loop that will even accommodate a G.I. pistol belt. Bulk packed. Made in Taiwan.

Made to fit CS97AM21. Black cordura nylon featuring taped and riveted seams, slotted back, double retaining straps, safety toe and a generous sized belt loop that will even accommodate a G.I. pistol belt. Bulk packed. Made in Taiwan.

Made to fit CS97AM24. Black cordura nylon featuring taped and riveted seams, slotted back, double retaining straps, safety toe and a generous sized belt loop that will even accommodate a G.I. pistol belt. Bulk packed. Made in Taiwan.

Black nylon construction. Made to fit CS97BM Bolo Machete. Made in China.

Construction: Cordura; Color: Black; Other Info: Taped riveted seams. For use with Cold Steel Heavy Machete. Bulk Packed. Made in China.

Black nylon construction. Made to fit CS97PM Panga Machete. Made in China.

Black nylon construction. Made to fit CS97TM21 Two Handed Latin Machette. Bulk packed. Made in Taiwan.

Black Concealex construction with neck chain. Hang packaged. Sheath only, Dart sold separately. Made in Taiwan.

Design your own custom kydex knife sheath. You may either purchase a knife on our website to have this fitted or send in your own knife. We make top of the line Kydex sheaths that you can carry with you wherever you may need to go. With this sheath forming to your actual knife, you know you will have the best fit available so you do not have to worry about losing it on your adventures. The advantages of having a custom Kydex sheath for your knife is the ease of removing it without having to untie or unsnap any buttons or snaps. The knife locks into place with a tight fit. You will not be disappointed with choosing this type of sheath for your knife. You may also leave a comment on the checkout page stating if you would like this to fit loosely or tightly to the knife. (Knife pictured is not included.)

Design your own custom kydex knife sheath. You may either purchase a knife on our website to have this fitted or send in your own knife. We make top of the line Kydex sheaths that you can carry with you wherever you may need to go. With this sheath forming to your actual knife, you know you will have the best fit available so you do not have to worry about losing it on your adventures. The advantages of having a custom Kydex sheath for your knife is the ease of removing it without having to untie or unsnap any buttons or snaps. The knife locks into place with a tight fit. You will not be disappointed with choosing this type of sheath for your knife. You may also leave a comment on the checkout page stating if you would like this to fit loosely or tightly to the knife. (Knife pictured is not included.)

Designed to fit 10" x 2" Chef's knife. Made of renewable, environmentally friendly bamboo. Magnets located along the edge of sheath. Vent hole at end of sheath to promote drying. Bulk packed. Made in Japan.

Designed to fit 10.5" x 1.5" carving or slicing knife. Made of renewable, environmentally friendly bamboo. Magnets located along the edge of sheath. Vent hole at end of sheath to promote drying. Bulk packed. Made in Japan.

Designed to fit 8.5" x 2" Chef's knife. Made of renewable, environmentally friendly bamboo. Magnets located along the edge of sheath. Vent hole at end of sheath to promote drying. Bulk packed. Made in Japan.

Designed to fit 7.5" x 2.5" Santoku knife. Made of renewable, environmentally friendly bamboo. Magnets located along the edge of sheath. Vent hole at end of sheath to promote drying. Bulk packed. Made in Japan.

Dimensions: 19"; Construction: Leather; Color: Brown; Other Info: Crocodile skin pattern. Full, hand braided edge. 2" longer, wider shank and belt loop allows knife to sit lower on hip. Honing steel sits in separate leather tube braided into the sheath's construction. "Croc tooth" ornament pieces that resemble crocodile teeth. Bulk Packed. Made in Taiwan.

For Estwing Machete (ESEBM) or a fixed blade with up to 12" blade. Nylon construction. Color: Black. Bulk packed. Made in Taiwan.

Contains molded black Kydex sheath with adjustable tensioner, clip plate, paracord and cord lock. Hardware: 4 each- screws, rubber washers and barrel nuts. Made in the USA.

For Estwing Small Bowie (ESEBK4) and (ESETK4) or fixed blades with blades up to 4". Nylon construction. Color: Black. Bulk packed. Made in Taiwan.

For Estwing Bowie (ESEBK6) and (ESETK6) or fixed blades with blades up to 6". Nylon construction. Color: Black. Bulk packed. Made in Taiwan.

Molded black Zytel contruction, without boot clip. Made in the USA.

Black molded Zytel construction with boot clip. Made in the USA.

Coyote brown molded Zytel construction. No boot clip. Made in the USA.

Coyote brown molded Zytel construction with boot clip. Made in the USA.

Foliage green molded Zytel construction. No boot clip. Made in the USA.

Foliage green molded Zytel construction with boot clip. Made in the USA.

Fits Esee Models 3 and 4. Black nylon construction with lashing holes. The top of the MOLLE back has both an adjustable handle retention strap and a flap that can be slipped over the pommel of the knife and secured tight with the paracord and cord lock thus making the sheath jump safe. Both the top and lower portions of the MOLLE back have built-in belt loops and MOLLE straps. Color: Black. Bulk packed. Made in China.

Fits ESEE Model 3 and 4. With lashing holes. The top of the MOLLE back has both an adjustable handle retention strap and a flap that can be slipped over the pommel of the knife and secured tight with the paracord and cord lock thus making the sheath jump safe. Both the top and lower portions of the MOLLE back have built-in belt loops and MOLLE straps. Khaki nylon MOLLE compatible belt sheath. Bulk packed. Made in China.

Fits Esee Model 3 and 4. Condura construction with lashing holes. The top of the MOLLE back has both an adjustable handle retention strap and a flap that can be slipped over the pommel of the knife and secured tight with the paracord and cord lock thus making the sheath jump safe. Both the top and lower portions of the MOLLE back have built-in belt loops and MOLLE straps. Color: OD Green. Bulk packed. Made in China.

Black molded Zytel construction. No clip. Bulk packed. Made in the USA.

Fits Esee Models 5, 6 and Laser Strike sheaths. The top of the MOLLE back has both an adjustable handle retention strap and a flap that can be slipped over the pommel of the knife and secured tight with the paracord and cord lock thus making the sheath jump safe. Both the top and lower portions of the MOLLE back have built-in belt loops and MOLLE straps. Color: Black. Bulk packed. Made in the USA.

Fits Esee Models 5, 6 and Laser Strike sheaths. The top of the MOLLE back has both an adjustable handle retention strap and a flap that can be slipped over the pommel of the knife and secured tight with the paracord and cord lock thus making the sheath jump safe. Both the top and lower portions of the MOLLE back have built-in belt loops and MOLLE straps. Khaki nylon sheath. Bulk packed. Made in USA.

Fits ESEE Model 6 knives. MOLLE and PALS system compatible. Ballistic nylon construction. OD green. Made in the USA.

Will bolt to the front of RC5 or RC6 hard sheath. Mounting hardware provided. Black ballistic nylon construction with lashing holes. Comes with metal tin, but will hold a regular Altoids tin. Black cord lanyard. Made in the USA.

Will bolt to the front of the Esee Model 5 or 6 hard sheath. Measures 4 1/2" x 3 1/8" x 1 1/4". Includes storage tin. Will also hold a regular Altoids tin. Includes four screws and posts. Color: OD green. Bulk packed. Made in China.

Molded black Zytel construction. No clip. Bulk packed. Made in the USA.

Molded coyote brown Zytel construction. No clip. Bulk packed. Made in the USA.

Molded OD green Zytel construction. No clip. Bulk packed. Made in the USA.

Fits Esee Candiru. Molded Kydex construction with lashing holes. Color: Coyote brown. Bulk packed. Made in China.

Fits Esee Candiru. Molded Kydex construction with lashing holes. Color: OD green. Bulk packed. Made in China.

Fits Esee Model CM6 Combat Tactical. Molded black Kydex construction with adjustable tensioner and lashing holes. Sheath only. Includes survival card. Bulk packed. Made in the USA.

Black injection molded sheath with lashing hole. Made to fit ESEE Cutlery Model RC1 Izula knife. Bulk packed. Made in the USA.

Coyote brown Injection molded sheath with lashing holes. Made in the USA.

Clear injection molded sheath with lashing holes. Made in the USA.

OD green injection molded sheath with lashing holes. Made in the USA.

Dimensions: 9" X 4" X 0.5"; Construction: Nylon; Color: Black; Bulk packed. Made in the USA.

Dimensions: 9" X 4" X 0.5"; Construction: Nylon; Color: Tan; Bulk packed. Made in the USA.

Dimensions: 9" X 4" X 0.5"; Construction: Nylon; Color: OD Green; Bulk packed. Made in the USA.

For Izula and Imlay knives. Orange Kydex belt sheath. Bulk packed. Made in the USA.

Includes an ambidextrous Kydex sheath with Cordura backing. The backing is shipped with four screws and posts and attached to the sheath starting with the second set of holes from the top of the sheath. Cordura backing has MOLLE compatible strapping, belt loop, 2 extender ring, pommel cover and an adjustable handle retention strap. The Cordura backing can be removed and only the Kydex sheath used to secure the knife. There are numerous grommet holes down both sides to enable various lashing and carry options. The entire sheath system is ambidextrous to enable left or right hand carry. Includes survival information card. Made in the USA.

Includes retention strap, sheath button post, and screw assembly. For use on Izula and Imlay sheaths. The strap is designed to be used on the Izula/Imlay knife only, not on knives with handles. If used on the Izula-II, then the handle must be removed. Please note that the strap will be considerably tighter on an Izula-II due to the extra handle length of the Izula-II. Bulk packed. Made in the USA.

Fits Fallkniven A1 model knives. Zytel construction. Color: Black. Bulk packed. Made in Sweden.

Fits Fallkniven A1 Fixed Blade knives or similar knives with blades up to 6.5" in length. Black molded ABS construction with nylon belt loop. Bulk packed. Made in Sweden.

Fits F1 Swedish Military Survival Knife. Black Zytel belt sheath. Bulk packed. Made in Sweden.

Left handed version. Fits F1 Swedish Military Survival Knife. Black Zytel belt sheath. Bulk packed. Made in Sweden.

Two-way locking mechanism. For Fallkniven F1 knife. Zy-Ex construction. Color: Black. Bulk packed. Made in Sweden.

Fits Fallkniven F1X knife. Zytel construction. Color: Black. Bulk packed. Made in Sweden.

Black Zytel and nylon construction. Fits Fallkniven S1 model fixed blades. Bulk packed. Made in Sweden.

For S1X Forest knife (FNS1X). Black Zytel construction with nylon loop. Bulk packed. Made in Sweden.

Black Kydex and nylon sheath. Fits WM1 Sporting Knife. Sheath only. Bulk packed. Made in Sweden.

Compatible with all colors of Eldris and the polymer sheath versions of Kansbol and Garberg. Leather construction. Bulk packed. Made in Sweden.

For use with standard Garberg. Includes belt loop, straps and a versatile mounting solution. MOLLE compatible. Knife is not included. Boxed with hanging tab. Made in Sweden.

For use with standard Kansbol. Includes belt loop, straps and a versatile mounting solution. MOLLE compatible. Knife is not included. Boxed with hanging tab. Made in Sweden.

Will fit most fixed blade knives with up to a 6 1/2" blade. Could also be used for a folding saw up to 8 1/8" closed. Green and ACU camo nylon construction. Velcro closure. Back features two MALICE clips. Made in China.

Fixed Blade Slim Sheath. Milspec ballistic nylon construction with Milspec snap closures. Bar Tack reinforced stitching. Hard plastic sheath liner. Fits blades up to 8" long by 1 3/4" wide. Maximum overall length is 12". OD green sheath. Bulk packed. Made in the USA.

Fixed Blade Slim Sheath. Milspec ballistic nylon construction with Milspec snap closures. Bar Tack reinforced stitching. Hard plastic sheath liner. Fits blades up to 8" long by 1 3/4" wide. Tan sheath. Bulk packed. Made in the USA.

Fixed Blade Slim Sheath. Milspec ballistic nylon construction with Milspec snap closures. Bar Tack reinforced stitching. Hard plastic sheath liner. Fits blades up to 8" long by 1 3/4" wide. Maximum overall length is 12". Black sheath. Bulk packed. Made in the USA.

Milspec ballistic nylon construction with Milspec snap closures. Bar Tack reinforced stitching. Hard plastic sheath liner. Fits 10.5" blade. OD green sheath. Bulk packed. Made in the USA.

Fixed Blade Slim Sheath. Milspec ballistic nylon construction with Milspec snap closures. Bar Tack reinforced stitching. Hard plastic sheath liner. Fits 10.5" blade. Black sheath. Bulk packed. Made in the USA.

Fits Ka-Bar U.S.A Fighter Knife (KA1211) or similar knives with blades up to 7" in length. Leather construction. Color: Black. Bulk packed. Made in Mexico.

Black Kydex and cordura construction. Made to fit Ka-bar models 1211, 1212, 1215, 1217, 1218, 1220, 1241, 1242, 1243, 9105, 9106, 9108, 9109, and 9110. Made in Taiwan.

Made to fit Ka-Bar USMC Fighter Knife (KA1217) or other similar knives with blades up to 7" in length. Leather construction. Color: Brown. Bulk packed. Made in Mexico.

Brown leather belt sheath embossed with Marine Corp logo. Made to fit the KA1217 Fighting Knife or other similar knives. Bulk packed. Knife sold separately. Made in Mexico.

Fits Ka-Bar U.S. Army Fighter knife (KA1220) or similar knives with blades up to 7" in length. Leather construction. Color: Brown. Bulk packed. Made in Mexico.

Fits Ka-Bar U.S. Navy Fighter fixed blade. Will also fit fixed blades up to 7" in length. Leather construction. Color: Brown. Bulk packed. Made in Mexico.

Fits Ka-Bar U.S.M.C. Short Fighting knife (KA1250) or similar knives with blades up to 5.25" in length. Leather construction. Color: Brown. Bulk packed. Made in Mexico.

Fits Ka-Bar U.S.A Short Fighting knife (KA1256) or similar knives with blades up to 5.25" in length. Leather construction. Color: Brown. Bulk packed. Made in Mexico.

Fits Ka-Bar U.S.A Short Fighting knife (KA1256) or similar knives with blades up to 5.25" in length. Leather construction. Color: Black. Bulk packed. Made in Mexico.

Measures 2 5/8" x 2 1/4" overall. Black stainless construction with four mounting holes. Made to fit all Ka-bar TDI knives (except for the LDK 1478BP). Includes fasteners. Bulk packed.

Specifically made to fit KA-BAR original TDI knives (1477; 1480; 1481). Hard plastic sheath with metal clip. Bulk packed. Made in Mexico.

Fits Ka-Bar TDI Law Enforcement knife (KA1482) or similar knives with blades up to 3.63" in length. Black molded nylon construction. MOLLE compatible. Bulk packed. Made in Taiwan.

Fits Ka-Bar Fighting Knife (KA5011) or similar knives with blades up to 7" in length. Gray molded plastic construction with black nylon belt loop. Bulk packed. Made in the USA.

Glass filled nylon sheath for Short Ka-Bars. Black belt sheath fits models 1250, 1251, 1252, 1256, 1257 1258, 1259 and 1261. Made in the USA.

Black nylon belt sheath with protective insert and storage pouch for sharpening stone (not included) or other small survival items. Velcro and snap closures. Leg ties. Made to fit Ka-bar fixed blade knives with a 7" blade. Made in China.

2 3/8" x 1 7/8". Black composition construction. Includes mounting hardware. Designed to fit the sheaths of the Amigo line of Neck knives to allow for about every carry option you can imagine. This versatile attachment system turns any Amigo neck knife into a belt knife, boot knife, pocket knife, or pack knife.

Fits up to 9" overall fixed blade. Leather construction. Color: Black. Bulk packed. Made in Russia.

Fits up to 9.5" overall fixed blade. Leather construction. Color: Brown. Bulk packed. Made in Russia.

Fits Kizlyar Colada or fixed blades up to 8.5" overall. Leather construction. Color: Brown. Bulk packed. Made in Russia.

Fits up to 9" fixed blade. Leather construction. Color: Black. Bulk packed. Made in Russia.

Fits up to 8" fixed blades. Black synthetic construction. Bulk packed. Made in Russia.

Fits up to 10" fixed blades. Black synthetic construction. Bulk packed. Made in Russia.

11" (27.94cm) overall. 6" (15.24cm) Teflon coated 80CrV2 carbon steel blade. Black rubber handle. Lanyard hole. Black composite belt sheath. Bulk packed. Made in Finland.

Vertical leather sheath with clip. Blue. For OPERA, JACK, GITANO, BESTMAN, BARLOW, BOLUS, TRE, THRILL. Made in Italy.

Vertical leather sheath with clip. Brown. For OPERA, JACK, GITANO, BESTMAN, BARLOW, BOLUS, TRE, THRILL. Made in Italy.

Vertical leather sheath with clip. Sand. For OPERA, JACK, GITANO, BESTMAN, BARLOW, BOLUS, TRE, THRILL. Made in Italy.

Vertical leather sheath with magnet clip. Blue. For OPERA, JACK, GITANO, BESTMAN, BARLOW, BOLUS, TRE, THRILL. Made in Italy.

Vertical leather sheath with magnet clip. Brown. For OPERA, JACK, GITANO, BESTMAN, BARLOW, BOLUS, TRE, THRILL. Made in Italy.

Vertical leather sheath with magnet clip. Sand. For OPERA, JACK, GITANO, BESTMAN, BARLOW, BOLUS, TRE, THRILL. Made in Italy.

Heavy black composition construction with olive green nylon strap and tension clip.

Fits MKM Makro 1 fixed blade. Includes: ULTICLIP SLIM 2.2; Leather laces for belt and neck carry; Mounting screws and spacers. Kydex construction. Color: Black. Boxed. Made in Italy.

Fits MKM Makro 2 fixed blade. Includes: ULTICLIP SLIM 2.2; Leather laces for belt and neck carry; Mounting screws and spacers. Kydex construction. Color: Black. Boxed. Made in Italy.

Dimensions: 4.72" x 2". Magnetic closure. Leather construction. Color: Brown. Boxed. Made in Italy.

Dimensions: 4.72" x 2". Magnetic closure. Leather construction. Color: Blue. Boxed. Made in Italy.

Dimensions: 4.72" x 2". Magnetic closure. Leather construction. Color: Pink. Boxed. Made in Italy.

Dimensions: 4.72" x 2". Magnetic closure. Leather construction. Color: Green. Boxed. Made in Italy.

Dimensions: 4.72" x 2". Magnetic closure. Leather construction. Color: Orange. Boxed. Made in Italy.

Heavy black nylon construction with orange embroidered Marble's logo and belt loop. Features one cargo pouch plus a pouch with included sharpening stone. Made to fit MR12714 Scout Machete or other machetes with 18" long and 2 1/2" blades. Bulk packed. Made in China.

Heavy black nylon construction with orange embroidered Marbles logo. Features two cargo pouches plus a pouch with sharpening stone. Made to fit MR12718 machete. Bulk packed. Made in China.

Black nylon construction with orange embroidered Marbles logo. Made to fit Marbles Jungle Bowie or other similar fixed blade knife with up to 10" blade. Front sharpening stone pocket with 3 1/8" x 1" x 5/8" stone. Bulk packed. Made in China.

Heavy black nylon construction with orange embroidered Marble's logo and belt loop. Features two cargo pouches plus a pouch with included sharpening stone. Made to fit MR3218 Swamp Master Machete. Bulk packed. Made in China.

Heavy black nylon construction with orange embroidered Marbles logo. Features two cargo pouches plus a pouch with sharpening stone. Made to fit MR33514 Bolo Camp Knife. Bulk packed. Made in China.

Black nylon construction with embroidered orange Marbles logo. Fits machete with up to 21" blade. Three front utility pockets with Velcro closure. One pocket contains 3 5/8" x 1 1/2" x 1/2" sharpening stone. Other two pockets could be used to hold folding knives or other small items. Bulk packed. Made in China.

Construction: Nylon; Color: Black; Other Info: For use with 14" machete. Orange Marbles logo. Includes 3.5" x 1.625" x 0.5" sharpening stone. Bulk Packed. Made in China.

Fits MR394 18" machete. Made in El Salvador.

Heavy black nylon construction with orange embroidered Marble's logo and belt loop. Features two cargo pouches plus a pouch with included sharpening stone. Made to fit MR5015 Fireman's Shovel Machete. Bulk packed. Made in China.

Heavy black nylon construction with orange embroidered Marbles logo. Features one cargo pouch plus a pouch with sharpening stone. Made to fit MR51214 Bolo Camp Cleaver. Bulk packed. Made in China.

Reproduction of Classic Marbles Moose sheath. Tan leather construction. Fits fixed blade with up to 4 1/4" blade.

Black nylon construction with embroidered orange Marbles logo. Designed to fit Marbles Parang or other Parangs with up to 15" blade. Front of sheath has pocket which contains 4" x 2" x 1/2" dual grit sharpening stone. Front of sheath also has additional small utility pocket. Bulk packed. Made in China.

Black leather construction. Designed to fit the Generation 2 fixed blade knife and marlin spike. A grommet near the top of the sheath allows you to attach either the spike or knife (recommended) to the sheath with a lanyard. Bulk packed. Made in China.

12" machete sheath. Black lightweight nylon construction. Fits 12" blade. Made in China.

18" machete sheath. Black lightweight nylon construction. Fits 18" blade. Made in China.

Official Government Issue Scabbard for Machetes. Heavy black plastic construction. Built-in knife sharpener sharpens blade as knife is removed. Steel mount for military web belt. Fits Machete with 18" blade. Made in China.

Fits 18" blade. OD Green plastic construction. Bulk packed.

22" Machete Sheath. Black heavy nylon construction. Will fit most machetes with 22" blades. Bulk packed. Made in China.

12" machete sheath. Heavy black nylon construction. Fits 12" blade. Made in China.

18" machete sheath. Heavy black nylon construction. Fits 18" blade. Made in China.

22" machete sheath. Heavy black nylon construction. Fits 22" blade. Made in China.

Will fit most fixed blade knives with up to a 7 1/4" long and 1 1/8" wide blade. Brown leather construction. Bulk packed. Made in Pakistan.

Fits 8" overall fixed blade with 4 1/2" long and 1 3/4" wide blade. Brown leather construction. Bulk packed. Made in Pakistan.

Measures 6 3/4" x 2 3/4". Fits 8" to 9" drop point hunting knife. Brown leather construction. Bulk packed. Made in Pakistan.

Measures 8 1/4" x 2 1/2". Fits 7 1/2" long and 1 3/4" wide drop point blade. Brown leather construction. Bulk packed. Made in Pakistan.

Fits up to 8" fixed blades. Leather construction. Color: Brown. Bulk packed. Made in Pakistan.

Fits up to 10" fixed blades. Leather construction. Color: Brown. Bulk packed. Made in Pakistan.

Fits up to 12" fixed blades. Leather construction. Color: Brown. Bulk packed. Made in Pakistan.

Dimensions: 9" x 2.25". Brown bridle leather construction. Belt loop fits up to a 2" belt. Right handed only. Fits Pathfinder items PTH301CM, PTH301CAM, PTH302CMXL, PTH302CAMXL, PTH303CM and PTH303CAM. Bulk packed. Made in USA.

Brown bridle leather construction. Belt loop fits up to a 2" belt. Right handed only. Fits Pathfinder items PTH300CMXL and PTH300CAMXL or knives with 6.25" blades. Bulk packed. Made in USA.

Brown bridle leather construction. Belt loop fits up to a 2" belt. Fits Pathfinder items PTH300CM and PTH300CAM or knives with 6" blades. Bulk packed. Made in USA.

Fits the RC3P and RC3S. Features jump-proof MOLLE back plate with drop-leg extender ring, belt loop, tie-down holes, and heavy duty MOLLE strap. Each sheath has three retention devices that may be used for securing the knife: 1) A friction fit, molded blade cover in coyote brown. 2) A Velcro retainer strap. 3) An elastic pommel cover that is unobtrusive until you pull it over the butt of the knife. Will also fit Ontario/RAT RAT-3 models. Made in the USA.

Black Kydex with MOLLE Locks and MOLLE back with paracord and cord lock. Includes sheath attachments for vertical and horizontal carry. Made in the USA.

Attaches to a sheath with two stainless steel Chicago screw sets and two rubber washers using a T-10 Torx wrench (not included). The clip features multiple mounting holes that can be set for vertical (handle up or handle down), horizontal, forward, and backward cants. It fits belts up to 1.5" wide and also functions as a spring clip for direct attachment to pockets and clothing. Attaches to either side of Spyderco sheaths, allowing them to be easily configured for inside-the-waistband carry and either edge-forward or edge-back orientation. Bulk packed. Made in the USA.

Black nylon construction with velcro closure. May be carried on belt in horizontal or vertical position. Fits fixed blade knives with up to 7 1/4" blade. Hang packaged. Made in China.