Call Us 989-365-3084

Fingerprinting

Fingerprinting

Fingerprinting supplies for sale!
We offer a variety of fingerprinting supplies including ink pads and fingerprint cards, as well as supplies such as tape, powder, brushes, and more for lifting fingerprints from surfaces. Check out our great prices on fingerprinting supplies below.

ID-EP 25 Identicator Easy Print Desk Pad - 2.4 Inch Round

ID-EP 25 Identicator Easy Print Desk Pad - 2.4 Inch Round

Featuring a firm thermoplastic surface, ink rises to the surface of the pad quickly and prevents dry or worn spots from forming over time. Rich, black fingerprints are produced which meet all state and federal agency requirements. Once fingerprinting is complete, simply rub the fingers together to remove any remaining ink residue or wipe clean with a cloth.

$49.91

In Stock

ID-EP35A Identicator Easy Print Portable Pad 2.75 Inch x 5.1 Inch

ID-EP35A Identicator Easy Print Portable Pad 2.75 Inch x 5.1 Inch

Featuring a firm thermoplastic surface, ink rises to the surface of the pad quickly and prevents dry or worn spots from forming over time. Rich, black fingerprints are produced which meet all state and federal agency requirements. Once fingerprinting is complete, simply rub the fingers together to remove any remaining ink residue or wipe clean with a cloth.

$61.81

In Stock

ID-EP35B Identicator Easy Print Desk Pad 7cm x 13cm

ID-EP35B Identicator Easy Print Desk Pad 7cm x 13cm

Featuring a firm thermoplastic surface, ink rises to the surface of the pad quickly and prevents dry or worn spots from forming over time. Rich, black fingerprints are produced which meet all state and federal agency requirements. Once fingerprinting is complete, simply rub the fingers together to remove any remaining ink residue or wipe clean with a cloth.

$60.51

In Stock

ID-LE10K Identicator Digit 10 Kit

ID-LE10K Identicator Digit 10 Kit

The Digit 10 system is the cleanest fingerprinting method on the market. Our unique inkless formulation produces permanent black prints on any fingerprint card. Just 40 seconds after rolling, permanent black prints that meet all FBI requirements develop. Special high-contrast cards are also available for highest-quality impressions best for scanning into AFIS. Each developer sheet processes up to 100 individual cards and the special fingerprint pad yields up to 10,000 individual prints. When not in use, store the kit in its custom carrying case (included) for easy and safe transport.

$1,262.39

Currently Unavailable/Use Waiting List

ID-LE110 Identicator Digit 10 System Refill Kit

ID-LE110 Identicator Digit 10 System Refill Kit

This Digit 10 Refill Kit includes a an inkless fingerprint pad and five additional developer sheets. Each pad will develop up to 10,000 individual prints and each developer sheet will process up to 100 full fingerprint cards.

$138.00

Currently Unavailable/Use Waiting List

ID-LE-110-PAD Identicator Digit 10 Kit Replacement Pad

ID-LE-110-PAD Identicator Digit 10 Kit Replacement Pad

This replacement inkless pad, for use with the Digit 10 Inkless Fingerprinting System will yield up to 10,000 individual prints.

$104.94

Currently Unavailable/Use Waiting List

ID-LE42-500 Identicator ReTabs

ID-LE42-500 Identicator ReTabs

ReTabs are pressure-sensitive correcting labels used to replace unacceptable fingerprints on a fingerprint card. Simply roll a new print on the ReTab and affix it to the fingerprint card once an acceptable print has been taken.

$35.96

Currently Unavailable/Use Waiting List

ID-LE-43 Identicator Pre Print Towelettes

ID-LE-43 Identicator Pre Print Towelettes

These easy-to-use moistened towelettes condition the skin for improved fingerprint impressions.

$22.05

Currently Unavailable/Use Waiting List

ID-PI 5 I Forensics Source Perfect Print Replacement Pad

ID-PI 5 I Forensics Source Perfect Print Replacement Pad

This Perfect Print Pad is a replacement pad for the Perfect Print Elimination Kit (2-3750) and the Postmortem Fingerprinting Kit (2-5003) and measures 1.75''L x 2.25''W (4.4cm x 5.7cm). The Perfect Print Pad allows the hands to be cleaned by simply wiping them clean with a cloth.

$24.77

In Stock

ID-PI10 Identicator Ink Small Round Pad 1.5 Inch Pack of 6

ID-PI10 Identicator Ink Small Round Pad 1.5 Inch Pack of 6

Perfect Print ink pads, from Identicator, can be used on any plain paper and produce sharp, black fingerprints. The hard, ceramic surface features micropores which allow ink to quickly rise to the surface of the pad and prevents worn or dry spots from forming on the pad over time. More importantly, however, the unique micropores in the ceramic surface regulate the flow of ink, preventing fingers from becoming overinked, resulting in unacceptable prints. Once ink is applied to the fingerprint card, it dries almost instantly, making it almost impossible to smudge or smear the fingerprint. For clean up, simply rub the fingers together or wipe clean with a cloth.

$87.37

In Stock

ID-PI20 Identicator Perfect Print Pad

ID-PI20 Identicator Perfect Print Pad

Perfect Print ink pads, from Identicator, can be used on any plain paper and produce sharp, black fingerprints. The hard, ceramic surface features micropores which allow ink to quickly rise to the surface of the pad and prevents worn or dry spots from forming on the pad over time. More importantly, however, the unique micropores in the ceramic surface regulate the flow of ink, preventing fingers from becoming overinked, resulting in unacceptable prints. Once ink is applied to the fingerprint card, it dries almost instantly, making it almost impossible to smudge or smear the fingerprint. For clean up, simply rub the fingers together or wipe clean with a cloth.

$47.95

In Stock

ID-PI30 Identicator Perfect Print Pad

ID-PI30 Identicator Perfect Print Pad

Perfect Print ink pads, from Identicator, can be used on any plain paper and produce sharp, black fingerprints. The hard, ceramic surface features micropores which allow ink to quickly rise to the surface of the pad and prevents worn or dry spots from forming on the pad over time. More importantly, however, the unique micropores in the ceramic surface regulate the flow of ink, preventing fingers from becoming overinked, resulting in unacceptable prints. Once ink is applied to the fingerprint card, it dries almost instantly, making it almost impossible to smudge or smear the fingerprint. For clean up, simply rub the fingers together or wipe clean with a cloth. Made in USA.

$86.42

In Stock

ID-PI39 Identicator Fingerprint Station 6 Inch x 17 Inch

ID-PI39 Identicator Fingerprint Station 6 Inch x 17 Inch

This simple, portable fingerprinting station, consists of our standard fingerprint cardholder with large Perfect Print pad mounted on a compact 15.2cm x 43.2cm (6 x 17) fingerprinting platform. The platform has rubber feet on the base to prevent slipping when in use. The cardholder is normally mounted on the left, as shown

$181.44

In Stock

ID-PI40A Identicator Applicant Fingerprint Cards

ID-PI40A Identicator Applicant Fingerprint Cards

This is the standard FBI fingerprint card, form No. FD-258 used by the FBI, Bureau of U.S. Citizenship and Immigration Services, and many police agencies for noncriminal fingerprinting (such as for employment clearances or immigration purposes). Packs of mailing envelopes for these cards are also available. These cards can have ORI information printed on them for an additional charge using the ORI information that you provide. Made in USA.

$74.00

In Stock

ID-PP-4T Identicator Perfect Print Tube

ID-PP-4T Identicator Perfect Print Tube

Perfect Print ink is a special paste-type fingerprint ink for use with slabs and rollers and our Printmaster inkers. Made in USA.

$30.60

Currently Unavailable/Use Waiting List

ID-PS30 Identicator Prescan Pad 3 x 4.5

ID-PS30 Identicator Prescan Pad 3 x 4.5

When using Live Scan€ fingerprinting units, the resulting fingerprints are not always perfect. This can often be caused by individuals with worn ridge detail, or as a result of the skin not making good contact with the scanner glass. These problems can be eliminated by using PreScan Fingerprint Enhancers. PreScan pads feature a special ridge enhancing formula that accentuates the fingerprint detail of those with worn or light ridge detail. In addition, the special ceramic pad applies the perfect amount of solution to the skin to make the best contact between the finger and the scanner, every time.

$110.98

In Stock

ID-PS5 Identicator PreScan Fingerprint Enhancer Pads

ID-PS5 Identicator PreScan Fingerprint Enhancer Pads

When using Live Scan€ fingerprinting units, the resulting fingerprints are not always perfect. This can often be caused by individuals with worn ridge detail, or as a result of the skin not making good contact with the scanner glass. These problems can be eliminated by using PreScan Fingerprint Enhancers. PreScan pads feature a special ridge enhancing formula that accentuates the fingerprint detail of those with worn or light ridge detail. In addition, the special ceramic pad applies the perfect amount of solution to the skin to make the best contact between the finger and the scanner, every time.

$123.67

Currently Unavailable/Use Waiting List

ID-TS2000 Identicator Touch Signature Fingerprint Pads

ID-TS2000 Identicator Touch Signature Fingerprint Pads

Designed for use in commercial institutions, Touch Signature pads can dramatically reduce bad check losses while ensuring customer identity. Touch Signature do not meet FBI requirements for applicant cards and should be used for commercial purposes only.

$19.24

Currently Unavailable/Use Waiting List

LP-1-0001 Lightning Powder Black 2 Ounce

LP-1-0001 Lightning Powder Black 2 Ounce

For maximum contrast against a dark-colored background, Lightning White Powder is recommended. Use a dedicated Zephyr Fiberglass Brush for white powder to avoid contamination from other colors of powder.

$13.00

In Stock

LP-1-0002 Lightning Powder Black 16 Ounce

LP-1-0002 Lightning Powder Black 16 Ounce

For maximum contrast against a dark-colored background, Lightning White Powder is recommended. Use a dedicated Zephyr Fiberglass Brush for white powder to avoid contamination from other colors of powder.

$42.03

In Stock

LP-1-0003 Lightning Powder Silver/Gray 2 Ounce

LP-1-0003 Lightning Powder Silver/Gray 2 Ounce

For maximum contrast against a dark-colored background, Lightning White Powder is recommended. Use a dedicated Zephyr Fiberglass Brush for white powder to avoid contamination from other colors of powder.

$13.71

Currently Unavailable/Use Waiting List

LP-1-0005 Lightning Powder Bi-Chromatic 2 Ounce

LP-1-0005 Lightning Powder Bi-Chromatic 2 Ounce

For maximum contrast against a dark-colored background, Lightning White Powder is recommended. Use a dedicated Zephyr Fiberglass Brush for white powder to avoid contamination from other colors of powder.

$15.97

In Stock

LP-1-0025 Lightning Powder Camelhair Brush

LP-1-0025 Lightning Powder Camelhair Brush

This is the most economical brush on the market. Small and convenient, it is an ideal brush for tight areas or as a clean up€ brush for larger areas. The overall length of the brush is approximately 15.2cm (6) with a bristle length of 32cm (11/4) Made in USA.

$20.65

In Stock

LP-1-0061 Lightning Powder Magnetic Powder Blitz-Red 1 Ounce

LP-1-0061 Lightning Powder Magnetic Powder Blitz-Red 1 Ounce

Similar in fluorescence to Redwop powder, our Blitz-Red Magnetic Fluorescent Powder fluoresces strongly when viewed under 254nm, 365nm, 450nm to 505nm and 550 to 590nm wavelengths of light.

$27.08

Currently Unavailable/Use Waiting List

LP-1-0081 Lightning Powder White 2 Ounce

LP-1-0081 Lightning Powder White 2 Ounce

For maximum contrast against a dark-colored background, Lightning White Powder is recommended. Use a dedicated Zephyr Fiberglass Brush for white powder to avoid contamination from other colors of powder.

$41.29

In Stock

LP-1-0105 Lightning Powder Latent Print Kit No. 1

LP-1-0105 Lightning Powder Latent Print Kit No. 1

The latent print brush is stored in a protective tube and held by a clip inside the lid. The tape and Bi-Chromatic fingerprint powder are held in a fitted insert. This kit includes the standard Zephyr Fiberglass Brush. 1 €“ Kit Box C contains: Bi-Chromatic Powder, 29g (2oz.); Zephyr Brush; Clear Lifting Tape, 3.8cm x 9.1m (1 1/2in x 360in); White Backing Cards, Pack of 100; Fitted Compartmentalized Insert Made in USA.

$85.48

Currently Unavailable/Use Waiting List

LP-1-0116 Forensics Source Latent Print Kit

LP-1-0116 Forensics Source Latent Print Kit

The latent print brush is stored in a protective tube and held by a clip inside the lid. The tape and Bi-Chromatic fingerprint powder are held in a fitted insert. This kit includes the standard Zephyr Fiberglass Brush. 1 €“ Kit Box C contains: Bi-Chromatic Powder, 29g (2oz.); Zephyr Brush; Clear Lifting Tape, 3.8cm x 9.1m (1 1/2in x 360in); White Backing Cards, Pack of 100; Fitted Compartmentalized Insert Made in USA.

$133.86

In Stock

LP-1-0120 Forensics Source Magnetic Powder

LP-1-0120 Forensics Source Magnetic Powder

Kit Box A, 21.3cm x 11.4cm x 4.3cm (83'8 x 41/2 x 111'16) Black Magnetic Powder, 84g (1oz.) Silver/Gray Magnetic Powder, 124g (1oz.) Magnetic Powder Applicator

$71.77

In Stock

LP-1-0135 Lightning Powder Field Print Kit

LP-1-0135 Lightning Powder Field Print Kit

This compact case was designed for field use. This small kit fits well into the trunk of any vehicle. Black Fingerprint Powder, 34g (2oz.) White Fingerprint Powder, 24g (2oz.) Two Zephyr Brushes Clear Lifting Tape, 5.1cm x 9.1m (2 x 360) White Backing Cards, Pack of 50 Black Backing Cards, Pack of 25 Pair of White Cotton Gloves Box Cutter Plastic Case with Fitted Foam

$196.81

Currently Unavailable/Use Waiting List

LP-1-0151 Lightning Powder Standard Magnetic Applicator

LP-1-0151 Lightning Powder Standard Magnetic Applicator

This ergonomically designed tool features a spring-loaded handle holding the internal magnet forward, allowing for dusting above a horizontal plane, even overhead. When ready, simply pull the handle to release the powder. A hexagonal lip around the rim of the applicator prevents powder from creeping up the handle and prevents the applicator from rolling away when placed on an uneven surface. The Standard Magnetic Applicator has a powerful magnet to hold a large amount of magnetic powder and is 14cm (5?€) long

$40.64

In Stock

LP-1-0160 Lightning Powder Magnetic Powder Black 1 Ounce

LP-1-0160 Lightning Powder Magnetic Powder Black 1 Ounce

Similar in tone to our standard black latent print powder, Black Magnetic Powder is recommended for use in dusting glossy papers (such as magazine covers), tissue paper, rough or polished wood, leather, plastics, glass, and rubber. It works exceptionally well on plastic baggies after they have been treated with cyanoacrylate esters (superglue fumes). Powder is packaged in wide-mouth jars for easy access with a magnetic applicator.

$16.63

In Stock

LP-1-0164 Lightning Powder Magnetic Powder Silver/Gray 1 Ounce

LP-1-0164 Lightning Powder Magnetic Powder Silver/Gray 1 Ounce

Similar in tone to our standard black latent print powder, Black Magnetic Powder is recommended for use in dusting glossy papers (such as magazine covers), tissue paper, rough or polished wood, leather, plastics, glass, and rubber. It works exceptionally well on plastic baggies after they have been treated with cyanoacrylate esters (superglue fumes). Powder is packaged in wide-mouth jars for easy access with a magnetic applicator.

$19.24

In Stock

LP-1-0200 Lightning Powder Zephyr Fiberglass Fingerprint Brush

LP-1-0200 Lightning Powder Zephyr Fiberglass Fingerprint Brush

The Zephyr Brush is the finest brush ever developed for use in fingerprint work. Brush consists of thousands of fiber bundles, each composed of more than a hundred individual treated-glass filaments

$18.07

In Stock

LP-1-0300 Lightning Powder The Breeze Single-Use Disposable Fiberglass Brush

LP-1-0300 Lightning Powder The Breeze Single-Use Disposable Fiberglass Brush

The Breeze Fiberglass Brush is a single-use, disposable latent print brush designed for use at crime scenes when cross-contamination is a top concern. The Breeze uses the same ultra-soft fibers that have been used for decades in the Zephyr fingerprint brush, only less fibers making the Breeze slightly less full and therefore a more economical option as a disposable brush. Each brush is individually packaged, sealed and UV and Ethylene Oxide (EtO) sterilized, so there is no risk of outside contaminants being introduced into a crime scene. After processing a crime scene for latent prints, the Breeze can be disposed of or packaged and submitted along with evidence for trace cross-contamination examinations.

$6.86

Currently Unavailable/Use Waiting List

LP-1-1411 Lightning Powder TapeGlo 500ml

LP-1-1411 Lightning Powder TapeGlo 500ml

TapeGlo is a fluorescent dye. Simply pour TapeGlo into a dipping tray or spray on the adhesive surface. TapeGlo fluoresces best when viewed between 488nm and 540nm.

$62.79

Currently Unavailable/Use Waiting List

LP-1-2022 Lightning Powder Lightning Lifts 2 Inch x 2 Inch

LP-1-2022 Lightning Powder Lightning Lifts 2 Inch x 2 Inch

Clear, pre-cut latent print lifters. Works just like a strip of lifting tape€”after the lift, place together again or adhere to the appropriate size and color-backing card.

$37.48

In Stock

LP-1-2083 Armor Forensics Gel Lifters White Pack of 10

LP-1-2083 Armor Forensics Gel Lifters White Pack of 10

Especially for lifting latent prints and dust impressions, Rubber-Gelatin Lifters are high-quality elastic sheets of rubber with a low-adhesive gelatin layer on one side. Made in USA.

$57.62

In Stock

LP-1-2084 Armor Forensics Rubber-Gelatin Lifters Black Pack of 10

LP-1-2084 Armor Forensics Rubber-Gelatin Lifters Black Pack of 10

Especially for lifting latent prints and dust impressions, Rubber-Gelatin Lifters are high-quality elastic sheets of rubber with a low-adhesive gelatin layer on one side. Made in USA.

$57.62

In Stock

LP-1-2085 Armor Forensics Gel Lifters White Pack of 2

LP-1-2085 Armor Forensics Gel Lifters White Pack of 2

Especially for lifting latent prints and dust impressions, Rubber-Gelatin Lifters are high-quality elastic sheets of rubber with a low-adhesive gelatin layer on one side. Made in USA.

$26.69

In Stock

LP-1-2086 Armor Forensics Black Gel Lifter Black Pack of 2

LP-1-2086 Armor Forensics Black Gel Lifter Black Pack of 2

Black Gel Lifter - 5.2 X 14.4 - 2 Pack Made in USA.

$26.69

In Stock

LP-1-2501 Lightning Powder Latent Print Cards

LP-1-2501 Lightning Powder Latent Print Cards

Attach latent prints on the glossy white side of our backing cards. The opposite side is non-glossy

$19.89

In Stock

LP-5-3870 Forensics Source Retractable Ridge Counter

LP-5-3870 Forensics Source Retractable Ridge Counter

This handy ridge counter works like a ballpoint pen. To protect the point when not in use, simply press the small button on the side to retract the point.

$27.44

In Stock

SIR-101L Sirchie Silk Black Fingerprint Powder 2 Ounce

SIR-101L Sirchie Silk Black Fingerprint Powder 2 Ounce

The most popular of Sirchie's oxide latent powders, Silk Black features micro-milling to assure the finest quality, and is one of the most versatile powders available. Sirchie has followed this same formulation for more than sixty years, which attests to its popularity. Use Silk Black on non-porous surfaces such as: painted wood, metal, and most plastic surfaces. This powder offers superior contrast on light-colored surfaces. 2 ounce jar. Made in Indonesia.

$11.89

In Stock

SIR-103L Sirchie Indestructible White Fingerprint Powder

SIR-103L Sirchie Indestructible White Fingerprint Powder

Indestructible White is the whitest of white powders available from any source. Its consistent quality and texture assure the best possible results on dark, non-porous surfaces. Micro-milled to perfection, Indestructible White has a superior affinity to the weakest of skin secretions Made in Indonesia.

$11.89

In Stock

SIR-125L Sirchie Standard Magnetic Powder Injection-Molded Applicator

SIR-125L Sirchie Standard Magnetic Powder Injection-Molded Applicator

The Standard Magnetic Powder Applicator is ideal for precision dusting of small to medium surface areas! This applicator is durable, injection-molded and features a narrow magnet to fit any size powder container. Use for processing paper, finished and unfinished wood, nonferrous metals, plastic, glass, vinyl, etc. Made in USA.

$28.77

In Stock

SIR-144L Sirchie Transparent Lifting Tape 1.5 Inch

SIR-144L Sirchie Transparent Lifting Tape 1.5 Inch

The industry's best lifting tape available is made exclusively by Sirchie. This tape is pressure-wound and heat treated to ensure even distribution of adhesive so all your prints lift without fish-eyes and no voids, no gaps! After lifting the powdered prints, the tape is easily mounted on our rigid vinyl or coated paper backing sheets. All 1'' tapes are packaged in dust-free plastic bags. All other sizes are packaged in dust-free plastic jars. All sizes are wound on standard 1 cores to fit the Sirchie lifting tape dispensers. All tapes measure 360'' length. Choose from 1'', 1.5'', or 2'' width. Made in USA.

$13.14

In Stock

SIR-144L2 Sirchie Transparent Lifting Tape 2 Inch

SIR-144L2 Sirchie Transparent Lifting Tape 2 Inch

The industry's best lifting tape available is made exclusively by Sirchie. This tape is pressure-wound and heat treated to ensure even distribution of adhesive so all your prints lift without fish-eyes and no voids, no gaps! After lifting the powdered prints, the tape is easily mounted on our rigid vinyl or coated paper backing sheets. All 1'' tapes are packaged in dust-free plastic bags. All other sizes are packaged in dust-free plastic jars. All sizes are wound on standard 1 cores to fit the Sirchie lifting tape dispensers. All tapes measure 360'' length. Choose from 1'', 1.5'', or 2'' width. Made in USA.

$13.99

In Stock

SIR-144L3 Sirchie Transparent Palm/Cluster Lifting Tape 3 Inch x 360 Inch

SIR-144L3 Sirchie Transparent Palm/Cluster Lifting Tape 3 Inch x 360 Inch

As their name implies, palm/cluster fingerprint lifting tapes are designed for lifting developed palm prints or cluster (multiple) fingerprints. The tape is transparent and is pressure-wound and heat-treated to eliminate imperfections and uneven adhesive. This lifting tape is individually packaged in resealable plastic bags for dust protection. It is 3'' W x 360'' L. Made in USA.

$19.85

In Stock

SIR-145L2 Sirchie Frosted Lifting Tape 2 Inch x 360 Feet

SIR-145L2 Sirchie Frosted Lifting Tape 2 Inch x 360 Feet

The industry's best lifting tape available is made exclusively by Sirchie. All sizes and both finishes (Transparent or Frosted) are pressure wound and heat treated to ensure even distribution of adhesive so all your prints lift without fish-eyes - no voids, no gaps! Select the size and finish you need. After lifting the powdered prints, the tape is easily mounted on our rigid vinyl or coated paper backing sheets. All 1 tapes are packaged in dust-free plastic bags. All other sizes are packaged in dust-free plastic jars. All sizes are wound on standard 1 cores to fit the Sirchie lifting tape dispensers. Tape is 360 feet long and comes in a 1 1/2'' width or a 2'' width. Made in USA.

$14.71

Currently Unavailable/Use Waiting List

SIR-230T Sirchie Search Fingerprint Ink Tube 2 Ounce

SIR-230T Sirchie Search Fingerprint Ink Tube 2 Ounce

Specially formulated for fingerprint work only, this densely-black ink is free flowing, easily rolled and dries quickly on paper but will remain soft and usable on a slab for days. This ink is not adversely affected by extreme temperature changes. It is used by large and small identification departments throughout the world. Choose from a 2 oz or 4 oz tube. Made in USA.

$11.32

In Stock

SIR-231T Sirchie Search Fingerprint Ink Tube 4 Ounce

SIR-231T Sirchie Search Fingerprint Ink Tube 4 Ounce

Specially formulated for fingerprint work only, this densely-black ink is free flowing, easily rolled and dries quickly on paper but will remain soft and usable on a slab for days. This ink is not adversely affected by extreme temperature changes. It is used by large and small identification departments throughout the world. Choose from a 2 oz or 4 oz tube. Made in Switzerland.

$15.44

Currently Unavailable/Use Waiting List

SIR-EZID300 Sirchie PrintMatic Impeccable Ceramic Fingerprint Pad

SIR-EZID300 Sirchie PrintMatic Impeccable Ceramic Fingerprint Pad

It is well known that the leading cause of poor impressions is over-inking of the fingers. The PrintMatic Impeccable Ceramic Fingerprint Pad is an ink pad system which is able to compensate for poor technique and uncooperative subjects by not only controlling the amount of ink on the pad surface, but by eliminating the effects of overpressure. Through the use of a micro-pore ceramic, PrintMatic Impeccable Ceramic Fingerprint Pads draw ink to the surface by capillary action. EZID ink is a stainfree, high-contrast, instant-drying, permanent ink. Made in USA.

$79.86

In Stock

SIR-EZID701 Sirchie Pocket Ceramic Fingerprint Pad

SIR-EZID701 Sirchie Pocket Ceramic Fingerprint Pad

The No. EZID701 has the same quality features as the full-sized ceramic pad, but is pocket-sized for portability and convenience. Measuring just 4.5 cm x 5.5 cm, the No. EZID701 can be carried anywhere, but unlike other pocket-sized pads, it's large enough and uniquely-shaped to allow the taking of rolled as well as plain impressions. Perfect for use in the field or office. Made in USA.

$20.13

In Stock

SIR-FPT265 Sirchie Porelon Fingerprint Pad

SIR-FPT265 Sirchie Porelon Fingerprint Pad

This pocket-sized pad, introduced by Sirchie more than 20 years ago, is the accepted STANDARD by law enforcement world wide. Each pad may be used to record thousands of fingerprints. A two-year supply of ink is impregnated in each pad (based on 75°F with lid closed after use), and is excellent for use in the field or office.The thermal-impregnated fingerprint ink is non-fading and dries on-contact in seconds. Ink rises to the surface as required through capillary action of the micro reticulated thermoplastic resin. Recorded fingerprints from this pad are accepted by state and federal agencies. The Porelon Pad utilizes the multi-mount injection molded case for versatility in mounting options.

$53.94

In Stock

SIR-FPT268A Sirchie Porelon Replacement Pad

SIR-FPT268A Sirchie Porelon Replacement Pad

Porelon replacement pad only. This pocket-sized replacement pad is the accepted STANDARD by law enforcement world wide. Each pad may be used to record thousands of fingerprints. A two-year supply of ink is impregnated in each pad (based on 75°F with lid closed after use), and is excellent for use in the field or office.The thermal-impregnated fingerprint ink is non-fading and dries on-contact in seconds. Ink rises to the surface as required through capillary action of the micro reticulated thermoplastic resin Made in USA.

$46.23

Currently Unavailable/Use Waiting List

SIR-FPT900A Sirchie SIRCH KLEEN Fingerprint Ink Remover Pads

SIR-FPT900A Sirchie SIRCH KLEEN Fingerprint Ink Remover Pads

SIRCH KLEEN Fingerprint Ink Remover Pads are individually pre-moistened pads that will quickly and easily remove fingerprint ink. SIRCH KLEEN pads are sanitary, disposable and leave the hands clean and fresh with a gentle skin conditioner. The pads also may be used to clean ink slabs when necessary. They are packaged one hundred pads to a container with a resealable lid. Made in USA.

$24.27

Currently Unavailable/Use Waiting List

SIR-GLT101B Sirchie Black GELifters 5.2 inch x 7.2 Inch

SIR-GLT101B Sirchie Black GELifters 5.2 inch x 7.2 Inch

A new solution to an old problem. Most crime scene technicians agree that no single latent print lifting medium serves well in all circumstances. GELifters are offered as an alternative when tape and other lifting mediums are not ideal for the situation. GELifters are constructed of high-quality latex and a bonded low-tack adhesive gelatin layer. Theyre ideal for lifting dust prints (footwear) and powder-developed latent fingerprints. GELifters are packaged in airtight foil packets and are available in black, white and transparent. Sold 10 each. Made in USA.

$49.00

In Stock

SIR-M114L Sirchie Regular Black Magnetic Fingerprint Powder 1 Ounce

SIR-M114L Sirchie Regular Black Magnetic Fingerprint Powder 1 Ounce

Sirchie's most popular powder color in magnetic form is finely milled for outstanding quality enhancement. This easy to use powder can be utilized on a wide variety of non-porous, non-ferrous surfaces. Made in Canada.

$13.34

In Stock

SIR-MFC100 Sirchie Patrol Latent Print Kit

SIR-MFC100 Sirchie Patrol Latent Print Kit

The Latent Print Field Kit is ideal for patrol officers who conduct crime scene investigation as well as regular patrol duties. It comes with complete instructions and the most widely used latent print development products available. Includes 101L black latent print powder (2oz), 144L2 transparent lifting tape (2''), 122L1 kit size fiberglass brush, LB003 backing sheet pad 3'' x 5'' (50 Sheets), MFC100C black, and a molded Copolymer carrying case. Made in Canada.

$57.33

In Stock

SIR-PFP200 Sirchie M2 Professional Magnifier

SIR-PFP200 Sirchie M2 Professional Magnifier

The M2 is an excellent Fingerprint Magnifier that provides 4.5x magnification using a two-element glass optics system which provides great clarity with a minimum of distortion. The magnifier's height adjustment knob allows for easy positioning of the optics. Constructed of precision-machined aluminum with an optical black anodized finish. The base is designed for use with the PF series of classification discs and features spring-loaded ball bearings allowing full 360 degree rotation of the classification discs. Made in USA.

$104.96

In Stock

SIR-PFP601 Sirchie Printmatic Thermoplastic Ink Pad 1 5/8 Inch

SIR-PFP601 Sirchie Printmatic Thermoplastic Ink Pad 1 5/8 Inch

These Printmatic Pocket Pads offer stainless ink for thousands of single impressions. To remove the ink from your fingers, simply rub your fingers together or use a dry paper towel. Made in USA.

$17.06

In Stock

SIR-PFP700 Sirchie Printmatic Flawless Ink Pad

SIR-PFP700 Sirchie Printmatic Flawless Ink Pad

This revolutionary new concept for recording fingerprints features a specially designed microporous membrane that features a pore size of 7 to 10 microns affording a higher degree of detail in the fingerprint impression. It produces thousands of rolled and plain impressions.The benefits to the fingerprint technician become obvious when using the Flawless system. The ink pad provides, through capillary action, just the right amount of ink on its surface - not too much and not too little. Less pressure is needed when fingers are rolled across the pad's surface so less distortion is transmitted to the resulting impressions. Printmatic Flawless ink pads are supplied in our unique multi-mount, injection molded, copolymer polypropylene case. And these cases are equipped with a positive, snaplock lid to protect the ink surface from airborne contaminants. Made in China.

$35.78

In Stock

SIR-SPR300 Sirchie Small Particle Reagent Kit

SIR-SPR300 Sirchie Small Particle Reagent Kit

Small Particle Reagent (SPR) is a suspension of fine molybdenum disulfide particles in a surface-active solution for light-colored surfaces and a white suspension for dark-colored surfaces. It adheres to the fatty constituents of latent fingerprints to form a gray or white deposit - depending on the reagent, and is a quick and simple latent print development process (recommended by the U.K. Home Office, Scientific ReSearch and Development Branch). Each kit includes complete instructions. Made in USA.

$263.04

In Stock