ESS Eyewear

The ESS High-Clearance U-Rx Replacement Nosepiece comes standard with the ESS-Oakley U-Rx prescription insert. It is compatible with ESS Crossbow, Crossbow Suppressor, Crosshair, ICE and ICE NARO eyeshields. This replacement nosepiece is an essential component of the U-Rx prescription insert. With 8mm of additional stand-off than the Low-Pro Nosepiece, the High-Clearance U-Rx Nosepiece also offers additional fit adaptability for certain users. This extra clearance improves the fit of eyeshields for some users whose eyelashes or cheeks touch the lens when using either the Low-Pro Nosepiece or the Medium-Clearance Nosepiece. It also increases airflow for enhanced fog resistance. Made in USA.

2.4mm interchangeable lens & nosepiece. ClearZone dual lens coatings maximize scratch resistance on the outside & fog resistance on the inside. Made in USA.

The Crossbow 3LS International Retail version features one Crossbow frame with three lenses: Clear, Smoke Gray and Hi-Def Yellow. Made in USA.

2.4mm interchangeable lens & nosepiece. ClearZone dual lens coatings maximize scratch resistance on the outside & fog resistance on the inside. Made in USA.

Designed specifically for all-day use with cranial-style helmets, the ESS Flight Deck is authorized by the U.S. Navy for use on flight decks and is standard issue for the Australian Navy. The patented Speed-Clip strap system makes strap adjustment quick and easy. The roomy Striker frame is designed to fit over most eyeglasses. Made in USA.

The ESS Crossbow Gasket, airflow management for your Crossbow Eyeshield. The Gasket fits snugly against the wearer's face to create a full seal to protect against wind, dust and other airborne debris. The Gasket insert is easy to install and features two modes: Closed - fully sealed and Open - ventilation mode. Optimize your efficiency by not having to change between goggles and eyeshields, insert the Gasket onto your Crossbows when you need protection from wind and airborne debris, remove it when you do not. The ESS Crossbow Gasket is compatible only with the ESS Crossbow and Crossbow Suppressor Eyeshields, sold separately. Made in USA.

The NFPA-compliant Innerzone 3 features a wrap-around strap that secures to the helmet with two Velcro tabs. Patented ESS Speed-Clip strap system makes strap adjustment quick and easy. This system keeps the goggles on hand at all times, with the flexibility of removing them quickly if needed. This configuration is recommended for use without face shields. The patented ESS Speed-Clip strap system makes adjusting the Innerzone straps quick and easy, even with gloves on. The full-perimeter ventilation and filtration system minimizes lens fogging and filters airborne particles, dust, and debris. The roomy Striker frame is designed to fit over most eyeglasses. Thick, 2.6mm polycarbonate lenses offer maximum impact protection and optical clarity. These lenses feature ESS' advanced ClearZone FlowCoat lens treatments, which provide an optimal combination of anti-scratch coatings on the outside of the lens and anti-fog coatings on the inside. All Innerzone goggles are compliant with the NFPA 1971-2013 structural fire equipment performance requirements, including the 500-degrees F for 5-minute oven test. They are also U.S. Federal OSHA compliant, exceed the requirements of ANSI Z87.1-2015, and are considered Primary Eye Protection by NFPA 1500. All Innerzone lenses provide 100% UVA/UVB Protection. Made in USA.

These replacement Snap-on/Snap-off Mounting Brackets for the ESS Innerzone 2, X-Tricator, FirePro-1977 EX and FirePro-1971 EX-2 are fully NFPA compliant and carry a lifetime warranty against manufacturer's defects. These Snap-on/Snap-off mounting brackets attach to the brim of nearly any helmet, no drilling required. Once installed, the goggle straps can snap on and off of the helmet, allowing the user to store the goggles on the front or rear of the helmet, or store the goggles in a pocket when not being worn. This patented system is ideal for use in conjunction with faceshields or flipdowns. Made in USA.

The Striketeam XTO features closed-cell face padding for maximum durability and ease of cleaning. The open-cell vent foam provides filtered ventilation, allowing the humid air to escape, but prevent airborn particles for getting in. All Striketeam goggle components are heat and flame resistant, including the face padding and vent foam, and the lenses provide maximum impact protection and optical clarity. The roomy Striker frame is designed to fit over most eyeglasses. The one-piece wrap-around strap features the patented ESS Speed-Clip system, which adapts to all wildland and rescue helmets and facilitates quick strap adjustment, even with gloves on. All Striketeam goggles are compliant with ANSI Z87.1-2015, U.S. Federal OSHA and wildland fire equipment performance requirements, including the 350-degrees F for 5-minute oven test. This line is considered Primary Eye Protection by NFPA 1500. Striketeam goggles use Striker Series lenses, all of which provide 100% UVA/UVB protection and distortion-free optical clarity. They meet and exceed ANSI Z87.1-2015, the U.S. Military .22 caliber ballistic impact test MIL-DTL-43511D (Clause 3.5.10), and CE EN 166. Made in USA.

2.4mm interchangeable lens & nosepiece. ClearZone dual lens coatings maximize scratch resistance on the outside & fog resistance on the inside. Made in USA.

When you try on the Crossbow, you'll discover it's unlike any other ballistic eyeshield. Experience the Tri-Tech Fit frame that achieves an amazing universal fit with max comfort and zero pressure points. Then notice the lenses. They won't fog. That's thanks to groundbreaking ClearZone FlowCoat technology, engineered to eliminate fog inside and prevent scratches outside. As you stare down your objective through distortion-free ESSOPTICS, you'll see just how optically precise vision can be. When you're ready to switch tints, the innovative DedBolt Lens Lock pivots up for easy release, then clamps down for rock solid retention under impact. It's from ESS, so of course the Crossbow is compliant with U.S. Federal OSHA, ANSI Z87.1-2015, CE EN 166 and U.S. MIL-PRF-32432A. Form, Fit, Function...Perfected. Get your hands on a Crossbow and see for yourself. As part of the ESS Cross-Series eyeshield platform, all Crossbow components are compatible and fully interchangeable with the ESS Crosshair and ESS Suppressor. For example, you can upgrade a Crosshair to premium Crossbow anti-fog lenses--including ANSI-rated Polarized--or adapt for hearing protection use with the ultra-thin suppressor frame. Made in USA.

2.4mm interchangeable lens & nosepiece. ClearZone dual lens coatings maximize scratch resistance on the outside & fog resistance on the inside. Made in USA.

The ICE-ONE Eyeshield is an economy configuration of the ESS ICE spectacle line. With one fully-assembled eyeshield and a microfiber pouch/cleaning cloth, you can now enjoy the safety and performance benefits of the ESS ICE product line at an even more affordable price. As with all products in the ESS Interchangeable Component Eyeshield (ICE) Series, the ICE-ONE is a lightweight, frameless eye protection system that offers a unique combination of high-impact resistance, unrestricted field of view, and interchangeable lenses for effective eye protection in any light condition. Equipped with the new ICE temple designs, ICE eyeshields feature improved fit with headborne equipment and increased ease of temple adjustment and lens interchange. Adjustable earbends allow for a comfortable, secure, anatomical fit. Telescoping temples offer bend-to-fit inner-wire ear tabs and a snap-on leash system. Made in USA.

The ESS Crossbow Suppressor is the first spectacle frame designed for use with ear cup hearing protection and communications devices. Featuring Z-Bend Geometry, the frame's ultra-thin temple arms help keep noise out by minimizing the effect on the padded seal of ear cups. The slim temples eliminate the hot spots and pressure points that commonly occur when normal eyewear is worn under ear cups. The Suppressor frame is compatible with all Crossbow lenses. These 2.4mm Polycarbonate lenses feature distortion-free ESSOPTICS and ClearZone FlowCoat technology to combat fogging on the inside and scratches on the outside. The frame's DedBolt. Lens Lock provides quick lens interchange and rock-solid retention under impact. Made in USA.

The ESS Crossbow Suppressor is the first spectacle frame designed for use with ear cup hearing protection and communications devices. Featuring Z-Bend Geometry, the frame's ultra-thin temple arms help keep noise out by minimizing the effect on the padded seal of ear cups. The slim temples eliminate the hot spots and pressure points that commonly occur when normal eyewear is worn under ear cups. The Suppressor frame is compatible with all Crossbow lenses. These 2.4mm Polycarbonate lenses feature distortion-free ESSOPTICS and ClearZone FlowCoat technology to combat fogging on the inside and scratches on the outside. The frame's DedBolt. Lens Lock provides quick lens interchange and rock-solid retention under impact. Made in USA.

The ESS Low-Pro Replacement Nosepiece comes standard withESS Crossbow, Crossbow Suppressor, ICE and ICE NARO eyeshields. It is also compatible with ESS Crosshair eyeshields. Made in USA.

This eyeshield hard case protects any ESS Crossbow, Crossbow Suppressor, Crosshair, ICE or ICE NARO eyeshield. Features a zipper closure and MOLLE-compatible attachments on the back. Made in USA.

The ESS Innerzone Nomex HeatSleeve helps protect the goggles from the elements when not being worn, keeping them clean, scratch free, and buffered from heat. ESS recommends this accessory for its Innerzone and FirePro-1971 structural goggles. Made in USA.

Low-profile frame, one-piece wrap-around strap w/Velcro helmet tabs. The ESS FirePro-1977 Series includes the most advanced low-profile willdand fire and rescue goggles on the market. The compact frame design prevents helmet interference while increasing peripheral vision. The FirePro-1977 is certified to meet the NFPA 1977 wildland fire equipment performance requirements, including the 350F for 5-minute oven test. They are also U.S. Federal OSHA compliant, exceed the requirements of ANSI Z87.1-2010, and are considered Primary Eye Protection by NFPA 1500. Made in USA.

The ESS Crossbow Suppressor is the first spectacle frame designed for use with ear cup hearing protection and communications devices. Featuring Z-Bend Geometry, the frame's ultra-thin temple arms help keep noise out by minimizing the effect on the padded seal of ear cups. The slim temples eliminate the hot spots and pressure points that commonly occur when normal eyewear is worn under ear cups. The Suppressor frame is compatible with all Crossbow lenses. These 2.4mm Polycarbonate lenses feature distortion-free ESSOPTICS and ClearZone FlowCoat technology to combat fogging on the inside and scratches on the outside. The frame's DedBolt. Lens Lock provides quick lens interchange and rock-solid retention under impact. Made in USA.

The Crossbow 2X U.S. Retail version features two complete eyeshields: one eyeshield with Clear lenses and one eyeshield with Smoke Gray lenses. Made in USA.

Replacement Elastic Retention Straps for ESS Cross-Series and ICE Series eyeshields, as well as ESS Rollbar, Crowbar, CDI and CDI MAX Series sunglasses. Made in USA.

When you try on the Crossbow, you'll discover it's unlike any other ballistic eyeshield. Experience the Tri-Tech Fit frame that achieves an amazing universal fit with max comfort and zero pressure points. Then notice the lenses. They won't fog. That's thanks to groundbreaking ClearZone FlowCoat technology, engineered to eliminate fog inside and prevent scratches outside. As you stare down your objective through distortion-free ESSOPTICS, you'll see just how optically precise vision can be. When you're ready to switch tints, the innovative DedBolt Lens Lock pivots up for easy release, then clamps down for rock solid retention under impact. It's from ESS, so of course the Crossbow is compliant with U.S. Federal OSHA, ANSI Z87.1-2015, CE EN 166 and U.S. MIL-PRF-32432A. Form, Fit, Function...Perfected. Get your hands on a Crossbow and see for yourself. As part of the ESS Cross-Series eyeshield platform, all Crossbow components are compatible and fully interchangeable with the ESS Crosshair and ESS Suppressor. For example, you can upgrade a Crosshair to premium Crossbow anti-fog lenses--including ANSI-rated Polarized--or adapt for hearing protection use with the ultra-thin suppressor frame. Made in USA.

The ESS Medium-Clearance Eyeshield Nosepiece comes standard with the Crosshair eyeshield. It is also compatible with ESS Crossbow, Crossbow Suppressor, ICE and ICE NARO eyeshields. This replacement nosepiece provides 3mm of additional stand-off than the Low-Pro Eyeshield Nosepiece. This extra clearance improves the fit of eyeshields for some users whose eyelashes or cheeks touch the lens when using the Low-Pro Nosepiece, and also increases airflow for enhanced fog resistance. Nosepiece is not designed to hold an Rx carrier. Made in USA.

The resilient, battle-hardened CDI sunglass has a long track record of saving eyes and lives in hostile situations. The ESS CDI's U.S. MIL SPEC high-impact lenses can be easily exchanged for quick adaptation to your environment. Its high-speed low-drag frame and shatter-resistant lenses make the CDI comfortable and cool enough for downtime yet functional and rugged enough for the battlefield. Medium fit. The CDI's Lateral Exchange System makes interchanging any of the available lens colors quick and easy. Made in USA.

2.4mm interchangeable lens & nosepiece. ClearZone dual lens coatings maximize scratch resistance on the outside & fog resistance on the inside. Made in USA.

The ESS Interchangeable Component Eyeshield (ICE) is a lightweight, frameless eye protection system that offers a unique combination of high-impact resistance, unrestricted field of view, and interchangeable lenses for effective eye protection in any light condition. Equipped with the new ICE temple designs, the ICE eyeshield features improved fit with headborne equipment and increased ease of temple adjustment and lens interchange. Adjustable earbends allow for a comfortable, secure, anatomical fit. Telescoping temples offer bend-to-fit inner-wire ear tabs and a snap-on leash system. Made in USA.

These high-impact, 2.2mm polycarbonate Hi-Def Bronze accessory lenses fit the ESS Rollbar sunglass. The Rollbar sunglass frame features a rotating lens gate that provides extremely rapid lens exchange and secure lens retention under impact. Made in USA.

The ICE Frame and Nosepiece Kit includes one pair of newly-designed temple pieces (right and left), one standard replacement nosepiece, and one elastic retention strap for ICE Eyeshields. These new ICE temples feature improved fit with headborne equipment and increased ease of temple adjustment and lens exchange. Adjustable earbends allow for a comfortable, secure, anatomical fit. Telescoping temples offer bend-to-fit inner-wire ear tabs and connection hole for a snap-on leash system. Made in USA.

Wire frame prescription carrier includes Advancer goggle hanger & Crossbow/Crosshair/ICE/ICE NARO compatable nosepiece. The ESS Vice Rx Lens Insert features a metal and mono-filament frame. The end result is a lightweight, low-profile prescription integration that is compatible with numerous ESS ballistic eyeshields. The Vice Rx Lens Insert accommodates a range of corrections to +2 to -7. Made in USA.

The Crossbow Tri-Tech Fit Replacement Frame is compatible with all ESS Crosshair and Crossbow lenses and provides a universal fit with zero pressure points. Made in USA.

2.4mm interchangeable lens & nosepiece. ClearZone dual lens coatings maximize scratch resistance on the outside & fog resistance on the inside. Made in USA.

A longtime favorite of U.S. Special Forces groups, the ESS Profile TurboFan is better and tougher than ever. Following a series of vast improvements, the Profile TurboFan represents one of the most effective night-vision-compatible weapon against lens fogging. Powered by a single AA battery, the TurboFan system draws fresh airflow in through the lower edge of the goggle frame and forces humid air out the top at around 13,000 rpm. Even when perspiration or temperatures are extreme, this two-speed system will exhaust humidity and dramatically reduce lens fogging for over 150 hours of continuous operation (low speed). This improved fog-elimination system features the robust PowerPod battery pack, now with a push-button switch and repositioned near the back of the head for snag-free operation. New technology provides constant fan speeds as battery power diminishes, and an ''Auto-off'' timer shuts down the fan system to preserve battery life if accidentally left on. Water-resistant casing facilitates all-weather operation. The extra-thick, 2.8mm polycarbonate lenses offer maximum impact protection and 100% UVA/UVB filtration. ESS' advanced ClearZone FlowCoat lens treatments provide the optimal combination of anti-scratch coatings on the outside of the lenses and anti-fog coatings on the inside. Made in USA.

The ESS Interchangeable Component Eyeshield (ICE) is a lightweight, frameless eye protection system that offers a unique combination of high-impact resistance, unrestricted field of view, and interchangeable lenses for effective eye protection in any light condition. Equipped with the new ICE temple designs, the ICE eyeshield features improved fit with headborne equipment and increased ease of temple adjustment and lens interchange. Adjustable earbends allow for a comfortable, secure, anatomical fit. Telescoping temples offer bend-to-fit inner-wire ear tabs and a snap-on leash system. Made in USA.

Crossbow Suppressor 2X+ kit includes two frames and three lenses: a Hi-Def Copper lens with an ultra-thin Crossbow Suppressor frame (for use with ear cups), a Clear lens with a standard Crossbow Tri-Tech Fit frames (for normal use without ear cups), and a spare smoke gray lens. Both frame options provide a universal fit. The Crossbow Suppressor also features Z-Bend geometry, ultra-thin temples, 2.4mm lenses, distortion-free ESSOPTICS, and ClearZone FlowCoat technology. Made in USA.

At ESS, superior function comes standard. The ESS Crosshair exceeds ANSI Z87.1 optical standards and U.S. Military impact requirements while providing all-day comfort and a universal fit. This entry-level eyeshield goes well beyond the basic necessities of eye protection: with a baseline of advanced performance and superb adaptability, the Crosshair benefits from complete compatibility with the ESS Cross-Series eyeshield platform. The Crosshair 3LS features one black crosshair frame with three lenses (clear, smoke gray and hi-def yellow). Made in USA.

The ESS FirePro-1977 Series includes the most advanced low-profile willdand fire and rescue goggles on the market. The compact frame design prevents helmet interference while increasing peripheral vision. The FirePro-1977 Asian-Fit is a compact, low-profile goggle specifically optimized to contour Asian faces. This Asian-Fit design features flatter lens curves and extra-padded face foam. ESS is able to maintain undistorted optics, while providing superior comfort, absorption, and a gap-free fit. Featuring a one-piece, wrap-around strap with Velcro tabs, the FirePro-1977 Asian-Fit is also simple to attach to any helmet. The patented ESS Speed-Clip strap system makes adjusting the FirePro straps quick and easy, even with gloves on. The full-perimeter ventilation and filtration system minimizes lens fogging and filters airborne particles, dust, and debris. The FirePro-1977 Asian-Fit features extra-thick, battlefield-proven OpFoam, a durable anti-microbial face padding that provides maximum comfort and ease of cleaning. Like all other components of the FirePro-1977 Asian-Fit, the OpFoam is heat and flame resistant. The extra-thick, 2.8mm high-impact lenses provide wide peripheral vision and distortion-free optics. These lenses also feature ESS' advanced ClearZone FlowCoat lens treatments, which provide an optimal combination of anti-scratch coatings on the outside of the lens and anti-fog coatings on the inside. The Asian-Fit FirePro is compliant with wildland fire equipment performance requirements, including the 350°F for 5-minute oven test. They are also U.S. Federal OSHA compliant, exceed the requirements of ANSI Z87.1?2015, and are considered Primary Eye Protection by NFPA 1500. FirePro-1977 Asian-Fit goggles use Asian-Fit Profile Series lenses, all of which provide 100% UVA/UVB protection and distortion-free optical clarity. These high-impact, 2.8mm polycarbonate lenses meet and exceed ANSI Z87.1-2015 and CE. Made in USA.

At ESS, superior function comes standard. The ESS Crosshair exceeds ANSI Z87.1 optical standards and U.S. Military impact requirements while providing all-day comfort and a universal fit. This entry-level eyeshield goes well beyond the basic necessities of eye protection: with a baseline of advanced performance and superb adaptability, the Crosshair benefits from complete compatibility with the ESS Cross-Series eyeshield platform. As part of the ESS Cross-Series, the Crosshair can be upgraded at any time with premium anti-fog Crossbow lenses, including the high-impact polarized gray option. It can also be adapted for use under hearing pro and comms gear with ESS's ultra-thin suppressor frames. With the Crosshair and Cross-Series, ESS has bridged the gap between price and premium performance. Now, more than ever, your eye pro kit can match your mission requirements, and your budget. Made in USA.

Accelerate your eye pro with the Rollbar interchangeable-lens sunglass from ESS. Fly through lens swaps and secure your safety with the auto-locking Rollbar lens gate. Revel in a sleek-yet rugged design that's built to excel in grueling environments. Count on military-grade polycarbonate to deliver crisp and accurate field of view, plus ANSI Z87+ and MIL SPEC ballistic protection. Leave discomfort in the dust with a balanced fit and low-drag temple arms that won't interfere with hats, helmets, hearing pro, or comms gear. The Rollbar sunglass frame features a rotating lens gate that provides extremely rapid lens exchange and secure lens retention under impact. Made in USA.

2.2mm polycarbonate high-impact replacement lenses for the CDI sunglass. This kit includes two CDI lenses (right and left) and a protective lens pouch. The CDI sunglass is sold separately. Made in USA.

Low-profile frame, two-piece strap w/Snap-On/Snap-Off mounting brackets. The ESS FirePro-1977 Series includes the most advanced low-profile willdand fire and rescue goggles on the market. The compact frame design prevents helmet interference while increasing peripheral vision. The FirePro-1977 is certified to meet the NFPA 1977 wildland fire equipment performance requirements, including the 350F for 5-minute oven test. They are also U.S. Federal OSHA compliant, exceed the requirements of ANSI Z87.1-2010, and are considered Primary Eye Protection by NFPA 1500. Made in USA.

By virtually eliminating lens fogging. The ESS Influx goggle allows users to maintain full situational awareness in dynamic environments. As part of the goggles patented Adjustable Ventilation System (AVS), the Influx RotoClip silently pivots the position of the lens inside the goggle frame: choose either a dust-free, fully-sealed mode, or a fog-free, open-ventilation mode. With Influx users can always see clearly and act fast when seconds count. In addition to controlling the AVS, the Rotoclip enables users to switch between lens tints with speed and ease, accelerating environmental adaptability and shortening down time. Combined with a host of other significant advancements, the Influx stands ready to cut through the fog of war and help clear a path to victory. The Influx Goggle exceeds U.S. MIL SPEC MIL-PRF-32432, ANSI Z87.1 2015, OSHA & CE EN166. Made in USA.