American made Knife Sheaths

Contains molded black Kydex sheath with adjustable tensioner, clip plate, paracord and cord lock. Hardware: 4 each- screws, rubber washers and barrel nuts. Made by ESEE in the USA.

Molded black Zytel contruction, without boot clip. Made by ESEE in the USA.

Black molded Zytel construction. No clip. Bulk packed. Made by ESEE in the USA.

Molded black Zytel construction. No clip. Bulk packed. Made by ESEE in the USA.

Molded coyote brown Zytel construction. No clip. Bulk packed. Made by ESEE in the USA.

Molded OD green Zytel construction. No clip. Bulk packed. Made by ESEE in the USA.

Coyote brown Injection molded sheath with lashing holes. Made by ESEE in the USA.

Clear injection molded sheath with lashing holes. Made by ESEE in the USA.

OD green injection molded sheath with lashing holes. Made by ESEE in the USA.

Measures 2 5/8" x 2 1/4" overall. Black stainless construction with four mounting holes. Made to fit all Ka-bar TDI knives (except for the LDK 1478BP). Includes fasteners. Bulk packed.

Embossed black leather American Steerhide belt sheath with stainless D-ring, snap over strap and side slip pouch for storing your fire starter. Vegetable tanned. Fits Brother's of Bushcraft (BROS-01), Dragonfly 4.5 (DFLY-4.5), Hunter of Gunmen 4.5 (HOG-4.5), Mohawk Hunter (MKH01), Shango-XL (SHGO-XL) and Spirit Hunter (SHR-01). Includes 2 3/4" overall black TOPS survival whistle and 3 1/8" overall fire starter with 2" rods. Bulk packed. Made by TOPS Knives in the USA.

3 3/4" overall. One size fits most medium to large Case patterns, including medium stockman and trapper. Bulk packed. Made by Case in the USA.

Fits Esee Models 5, 6 and Laser Strike sheaths. The top of the MOLLE back has both an adjustable handle retention strap and a flap that can be slipped over the pommel of the knife and secured tight with the paracord and cord lock thus making the sheath jump safe. Both the top and lower portions of the MOLLE back have built-in belt loops and MOLLE straps. Color: Black. Bulk packed. Made by ESEE in the USA.

Fits ESEE Model 6 knives. MOLLE and PALS system compatible. Ballistic nylon construction. OD green. Made by ESEE in the USA.

Will bolt to the front of RC5 or RC6 hard sheath. Mounting hardware provided. Black ballistic nylon construction with lashing holes. Comes with metal tin, but will hold a regular Altoids tin. Black cord lanyard. Made by ESEE in the USA.

Brown leather with stamped logo. Measures 5" overall. Will fit folding knives up to 4 1/4" closed and 1" wide. Bulk packed. Made by Case in the USA.

Black molded Zytel construction with boot clip. Made by ESEE in the USA.

Coyote brown molded Zytel construction. No boot clip. Made by ESEE in the USA.

Coyote brown molded Zytel construction with boot clip. Made by ESEE in the USA.

Foliage green molded Zytel construction. No boot clip. Made by ESEE in the USA.

Foliage green molded Zytel construction with boot clip. Made by ESEE in the USA.

Black injection molded sheath with lashing hole. Made to fit ESEE Cutlery Model RC1 Izula knife. Bulk packed. Made by ESEE in the USA.

Includes an ambidextrous Kydex sheath with Cordura backing. The backing is shipped with four screws and posts and attached to the sheath starting with the second set of holes from the top of the sheath. Cordura backing has MOLLE compatible strapping, belt loop, 2 extender ring, pommel cover and an adjustable handle retention strap. The Cordura backing can be removed and only the Kydex sheath used to secure the knife. There are numerous grommet holes down both sides to enable various lashing and carry options. The entire sheath system is ambidextrous to enable left or right hand carry. Includes survival information card. Made by ESEE in the USA.

Fits the RC3P and RC3S. Features jump-proof MOLLE back plate with drop-leg extender ring, belt loop, tie-down holes, and heavy duty MOLLE strap. Each sheath has three retention devices that may be used for securing the knife: 1) A friction fit, molded blade cover in coyote brown. 2) A Velcro retainer strap. 3) An elastic pommel cover that is unobtrusive until you pull it over the butt of the knife. Will also fit Ontario/RAT RAT-3 models. Made by ESEE in the USA.

Black Kydex sheath with belt clip. Substantial drain hole and plenty of clearance for the blade. Bulk packed. Made in the USA.

Orange Kydex sheath with belt clip. Substantial drain hole and plenty of clearance for the blade. Bulk packed. Made in the USA.

Comes with AB 3 clip and 88 BB eyelets. Partially assembled at industry spec so it can be used with multiple belt clips. Comes with detailed instructions. Bulk packed. Color: Tan. Made in the USA.

Fits BOB (Brothers of Bushcraft) fixed blade. Brown leather construction. Built-in ferro rod attachment point. Comes with fire starter and survival whistle. Bulk packed. Made by TOPS Knives in the USA.

Dimensions: 9" X 4" X 0.5"; Construction: Nylon; Color: Black; Bulk packed. Made by ESEE in the USA.

Dimensions: 9" X 4" X 0.5"; Construction: Nylon; Color: Tan; Bulk packed. Made by ESEE in the USA.

Dimensions: 9" X 4" X 0.5"; Construction: Nylon; Color: OD Green; Bulk packed. Made by ESEE in the USA.

Construction: Kydex; Color: Black; Other Info: Pre-formed DIY sheath kit for 4-5 blades. Comes with an instruction manual and link to a how-to video on YouTube. Some basic tools needed such as heat gun and Kydex forming foam. Bulk Packed. Made in the USA.

Sheath. Fits most 4.75" folding knives. Made to fit BU547 Open Season Linerlock. Black leather sheath. Bulk packed. Made in China.

Brown leather construction. Fits most 3" folding knives. Bulk packed. Made by Case in the USA.

Brown leather construction. Fits most 4.5" folding knives. Bulk packed. Made by Case in the USA.

Soft leather belt sheath. Fits most folding knives up to 4" closed. Made by Case in the USA.

Brown leather with stamped Job Case logo. Fits folding knife up to 4 1/2" closed. Bulk packed. Made by Case in the USA.

Fixed Blade Slim Sheath. Milspec ballistic nylon construction with Milspec snap closures. Bar Tack reinforced stitching. Hard plastic sheath liner. Fits blades up to 8" long by 1 3/4" wide. Maximum overall length is 12". Black sheath. Bulk packed. Made by Hogue in the USA.

Will fit most folding knives up to 4 3/4" closed. Green and ACU camo nylon construction. Velcro closure. MOLLE compatible. Made by Gerber in the USA.

Fits 4" overall folding knife. Leather construction. Color: Brown. Bulk packed. Made by Case in the USA.

For Izula and Imlay knives. Orange Kydex belt sheath. Bulk packed. Made by ESEE in the USA.

Includes retention strap, sheath button post, and screw assembly. For use on Izula and Imlay sheaths. The strap is designed to be used on the Izula/Imlay knife only, not on knives with handles. If used on the Izula-II, then the handle must be removed. Please note that the strap will be considerably tighter on an Izula-II due to the extra handle length of the Izula-II. Bulk packed. Made by ESEE in the USA.