 |
BL014 Knife Making Drop Point Blade |
| 8 1/4" overall. 4" stainless blade. Brass finger guard. Full Tang. Ideal for the do-it-yourself knife maker. Made in Pakistan. |
| Availability: In Stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
BL011D Skinner Knife Blade |
| 10 1/4" overall. 5 1/4" blade. One piece Damascus steel construction. Made in Pakistan. |
| Availability: In Stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
BL057 Knifemaking Bolo Blade |
| 13 3/4" overall. 9 1/4" stainless blade. Brass guard. Bulk packed. Made in Pakistan. |
| Availability: Out of Stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
BL024 Knife Blade Damascus Bar |
| 12 1/4" x 2 3/8". This damascus steel is in the annealed (soft) state so you can cut, drill, and grind it with normal metal working tools and equipment. After working the blade it must be heat treated (hardened and tempered). It must then be etched to bring out the pattern of the Damascus. Etch in Muriatic Acid from the local hardware store. BE SURE TO FOLLOW LABEL SAFETY DIRECTIONS! Be sure the steel is clean! Etch time varies. Start with 5 minutes, then wipe and repeat until desired etch depth is reached. After etching you must neutralize the acid by rubbing the blade with a paste made from baking soda and water. Dry and oil immediately. Made in Pakistan. |
| Availability: In Stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
M3788 Knife Handle Scales Stag |
| 3" long x 7/8" wide x 1/8" thick. Set of two. Great for the Do-It-Yourself Knifemaker. Made in China. |
| Availability: In Stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
KB222 Kanetsune Hi |
| 6 3/4" overall. 2 1/2" white steel blade. Leather sheath. Made in Japan. |
| Availability: Out of Stock |
|
|
 |
KB223 Kanetsune Yama |
| 6 3/4" overall. 2 1/2" white steel blade. Leather sheath. Made in Japan. |
| Availability: In Stock |
|
|
 |
M382 Ram's Horn Knife Handle Scales |
| 3 1/2" long x 1 3/4" wide x 1/4" thick. Use as handle material for custom or factory knives. Sold in sets of two. Measurements are approximate. Made in Russia. |
| Availability: In Stock |
|
|
 |
M430 Pearl Knife Handle Scales |
| 4" long x 1 1/8" wide x 3/32" thick. Use as handle material for custom or factory knives. Sold in sets of two. Measurements are approximate. Made in the Philippines. |
| Availability: In Stock |
|
|
 |
M503 Sambar Stag Knife Scales |
| 4" long x 1 1/8" wide x 3/8" thick. Use as handle material for custom or factory knives. Sold in sets of two. Measurements are approximate. Made in Mongolia. |
| Availability: In Stock |
|
|
|
|
 |
M3787 Knife Handle Scales Stag |
| 2 3/4" long x 11/16" wide x 1/8" thick. Set of two. Great for the Do-It-Yourself Knifemaker. Made in China. |
| Availability: In Stock |
|
|
|
|
 |
M3789 Knife Handle Scales Stag |
| 3 1/4" long x 7/8" wide x 1/8" thick. Set of two. Great for the Do-It-Yourself Knifemaker. Made in China. |
| Availability: Out of Stock |
|
|
 |
M3791 Knife Handle Scales Stag |
| 4" long x 1" wide x 3/16" thick. Set of two. Great for the Do-It-Yourself Knifemaker. Made in China. |
| Availability: In Stock |
|
|
 |
M3792 Knife Handle Scales Stag |
| 3 1/2" long x 1" wide x 1/4" thick. Set of two. Great for the Do-It-Yourself Knifemaker. Made in China. |
| Availability: In Stock |
|
|
 |
M3793 Knife Handle Scales Stag |
| 4 1/8" long x 1 1/8" wide x 3 /8" thick. Set of two. For custom knife making. Made in China. |
| Availability: Out of Stock |
|
|
 |
M3794 Knife Handle Scales Stag |
| 4 1/2" long x 1 1/4" wide x 1/4" thick. Set of two. Thickness may vary between 1/8" to 3/8". For custom knife making. Made in China. |
| Availability: Out of Stock |
|
|
|
|
 |
MI151 Amber Bone Knife Scales |
| 3" long x 1" wide x 1/8". Use as handle material for custom knife making or factory knives. Sold in sets of two. Made in China. |
| Availability: In Stock |
|
|
 |
MI152 Green Jigged Bone Knife Scales |
| 3" long x 1" wide x 1/8". Use as handle material for custom knife making or factory knives. Sold in sets of two. Made in China. |
| Availability: In Stock |
|
|
|
|
 |
CSH90PTH Cold Steel Trench Hawk Handle |
| 18 7/8" overall. Replacement handle for the Cold Steel Trench Hawk (CS90PTH). Black polypropylene construction. Bulk packed. Made in Taiwan. |
| Availability: Out of Stock |
|
|
 |
ESCANHDLCNV Esee Candiru Handles |
| Includes a pair of green canvas micarta handle scales with mounting hardware for the ESEE Candiru and survival information card. Bulk packed. Made in the USA. |
| Availability: In Stock |
|
|
 |
ESCANHDLOR Esee Candiru Handles |
| Includes a pair of orange G-10 handle scales with mounting hardware for the ESEE Candiru and survival information card. Bulk packed. Made in the USA. |
| Availability: In Stock |
|
|
 |
ESJPBLK ESEE Junglas MOLLE Panel - Black |
| 8 3/8" x 3 5/8". Bolts directly to the Junglas sheath allowing the user to attach MOLLE compatible gear directly to the Junglas knife and sheath. Panel only. Bulk packed. Made in the USA. |
| Availability: In Stock |
|
|
 |
M508 Stag Knife Handle Scales |
| 5" long approximately. Ideal for Knife making. Genuine stag. One piece round design. Bulk packed. Made in Mongolia. |
| Availability: In Stock |
|
|
|
|
 |
ESJPOD ESEE Junglas MOLLE Panel - OD Green |
| 8 3/8" x 3 5/8". Bolts directly to the Junglas sheath allowing the user to attach MOLLE compatible gear directly to the Junglas knife and sheath. Panel only. Bulk packed. Made in the USA. |
| Availability: In Stock |
|
|
 |
BL508 Knifemaking Blade Linerlock Blade |
| 3 1/4" blade. Not marked. Good condition but may have minor blemishes. From the Arrowhead factory or the old Schrade factory. Made in the USA. |
| Availability: In Stock |
|
|
|
|
 |
BL607 Knifemaking Folding Knife Blade |
| 3 7/8" overall. 3 1/4" blade. Not marked. These blades are work in process (WIP) from the Camillus Knife Factory prior to its going out of business. They are in various stages of production. Consider them as being in very rough condition. |
| Availability: In Stock |
|
|
 |
BL685 Knifemaking Schrade Folding Knife Blade |
| 2 1/2" overall. 1 3/4" blade. Not marked. These blades are in good condition but may have minor blemishes. From the Arrowhead factory and the old Schrade factory. Bulk packed. Made in the USA. |
| Availability: In Stock |
|
|
 |
BL686 Knifemaking Schrade Folding Knife Blade |
| 4 1/2" overall. 3 1/2" blade. Marked Schrade+ USA 6OT. These blades are in good condition but may have minor blemishes. From the Arrowhead factory and the old Schrade factory. Bulk packed. Made in the USA. |
| Availability: In Stock |
|
|
 |
BL687 Knifemaking Schrade Guthook Knife Blade |
| 8 3/4" overall. 4 1/2" guthook blade with Schrade USA 143OT tang stamp. Full tang. These blades are in good condition but may have minor blemishes. From the Arrowhead factory and the old Schrade factory. Bulk packed. Made in the USA. |
| Availability: In Stock |
|
|
 |
BL7787 Hatchet Making Blade |
| 6 3/8" stainless blade with 2 5/8" cutting edge. Full tang. Includes brass guard. Ideal for the do-it-yourself knife maker. Made in Pakistan. |
| Availability: In Stock |
|
|
 |
BL7821 Knife Making Clip Point Blade |
| 8 1/4" overall with 4 5/8" stainless upswept blade and has a threaded tang. Includes nickel silver guard. Ideal for the do-it-yourself knife maker. Made in Pakistan. |
| Availability: Out of Stock |
|
|
|
|
 |
BL7891 Knife Making Bowie Blade |
| 8 1/4" stainless blade. Includes brass guard. Ideal for the do-it-yourself knife maker. Made in Pakistan. |
| Availability: In Stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
BRU82002 Brusletto Knife Making Kit |
| All you need to make a Falken Game Hunter knife at home. Includes a 4" walnut handle, 3 1/2" Falken blade - fully hardened, tempered, polished & marked, pre-cut brown leather sheath, sheath safety insert, guard, needle and sheath stitching cord. Hang packaged. Made in Norway. |
| Availability: In Stock |
|
|
|
|
|
|
|
|
|
|
|
|
