 |
CR5340 CRKT Ikoma Carajas Pocket Knife |
| 4 1/4" closed linerlock. 3 1/8" satin finish 12C27 Sandvik stainless drop point blade with drilled hole design and extended tang. Hardened to 59-61 HRC. Features the IKBS™ pivot system. Black G-10 handles with a full length, treaded backspacer for a tactile grip. Lanyard hole. Stainless pocket clip with slot cutout. Designed by Flavio Ikoma. Made in China. |
| Availability: In Stock |
|
|
 |
CR2011 Columbia River Stubby Pocket Razel |
| A cross between a chisel and a razor with a knife handle results in two edges - one for pushing and one for cutting. Cutting edges measure 1" and 2 1/8" Very thick full tang blades made of 9Cr18MoV stainless steel. Contoured micarta handles. Custom fit Kydex sheath. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2370C CRKT Dogfish Neck Knife |
| 5" overall. 2" blade. One piece 3Cr13 stainless construction with bead blast finish. Dogfish pommel incorporates a lanyard hole and bottle opener. Black Kydex neck sheath. Tom Krein design. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
|
CR2371C CRKT Dogfish Neck Knife |
| 5" overall. 2" partially serrated blade. One piece 3Cr13 stainless construction with bead blast finish. Dogfish pommel incorporates a lanyard hole and bottle opener. Black Kydex neck sheath. Tom Krein design. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR2387K CRKT Folts Minimalist Bowie Knife |
| 5 1/8" overall. 2" Black 5Cr15MoV stainless bowie style clip point blade. Full tang. -black Micarta scales with three finger choils. Friction grooved top edge. Black braided fob. Black Zytel sheath with neck paracord. Also included is a detachable belt clip. Made in China. |
| Availability: In Stock |
|
|
 |
CR2605 CRKT Hammond ABC All Bases Covered Knife |
| 8 3/8" overall. 3 1/4" AUS-8 tanto blade features hollow ground plain bottom edge with serrated top edge and black titanium nitride coating. Full tang skeletonized construction. Black Zytel handles with aggressive texture for sure grip. Zytel sheath with clip for a variety of carry options. Designed by Jim Hammond. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2705N CRKT First Strike Knife |
| 9 1/4" overall. 4 1/2" AUS-6M stainless tanto blade with satin finish. Full tang. Black cord wrapped handle with black rayskin underlays. Zytel sheath with removable clip allows for multiple carry options. Made in Taiwan. |
| Availability: Out of Stock |
$38.48 |
| $36.56 |
 |
|
|
|
 |
CR2720 CRKT Chogan T-Hawk Knife |
| 14" overall. 7" black powder coated SK5 carbon steel axe head with 3" sharpened edge. Opposite end of axe head has hammer. Full tang. Black glass filled nylon handle with EDM finish. MOLLE compatible black Kydex® sheath. Functional in law enforcement, military, and civilian applications. Ideal for breaching, emergency extractions, and much more. Ryan Johnson design. Hang packaged. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2725 CRKT Kangee T-Hawk Knife |
| 13 3/4" overall. 7" black powder coated SK5 carbon steel axe head with 3" sharpened edge. Opposite end of axe head has spike. Full tang. Black glass filled nylon handle with EDM finish. MOLLE compatible black Kydex® sheath. Functional in law enforcement, military, and civilian applications. Ideal for breaching, emergency extractions, and much more. Ryan Johnson design. Hang packaged. Made in Taiwan. |
| Availability: Out of Stock |
$112.49 |
| $109.11 |
|
|
|
|
 |
CR2906 CRKT Otanashi noh Ken Pocket Knife |
| 5 1/2" closed framelock. 4 1/2" black finish AUS-8 stainless blade with thumb lug. LAWKS® safety. Textured black G-10 front handle. Black finish aluminum back handle. Lanyard hole. Black finish stainless pocket clip. James Williams design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2913 CRKT Williams Sakimori |
| 11" overall. 5 3/4" modified tanto style tool steel blade with satin finish. Black rayskin handle with black cord wrap. Black molded Kydex belt sheath with multiple carry options. Sakimori means "Noble Defender". Deluxe wooden presentation box with velvet lined vacuum formed insert. Box lid features Japanese artwork. Designed by James Williams, martial arts practitioner/instructor. Developed to meet user specific requests of coalition forces overseas for a powerful tactical tool. Made in China. |
| Availability: In Stock |
|
|
 |
CR3080 CRKT Surf N' Turf Pocket Knife |
| 6 1/2" closed linerlock. 5" 5Cr13MoV stainless fillet/boning blade with dual thumb studs. Black POM handles. Stainless pocket clip. Designed by Russ Kommer. Made in China. |
| Availability: In Stock |
|
|
 |
CR2210T CRKT Hammond FE9 Trainer Knife |
| 14 1/4" overall. 9" unsharpened training blade. One-piece black thermo plastic rubber construction. Finger grooved handle. Lanyard hole. Jim Hammond and Arcenio James Advincula design. Hang packaged. Made in Taiwan. |
| Availability: In Stock |
|
|
|
CR5102C CRKT Van Hoy RSL Snap Lock™ Pocket Knife |
| 3 1/4" closed. All AUS-4 stainless construction with bead blast finish. Standard edge blade. Stainless pocket clip. Features the Rotating Snap Lock™, a unique cam opening and blade locking mechanism. Ed Van Hoy design. Hang packaged. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2210 CRKT Hammond FE9 Knife |
| 14.13" overall. 9" black powder coated 01 tool steel "aggressive" drop point blade with slight recurve bottom edge and partial "file" top edge. Hardened to 56-58 HRC. Full tang. Black fingergrooved G-10 handles with hand guard. Lashing holes/lanyard hole. Black molded high-strength nylon glass fiber reinforced sheath with MOLLE clips. Also includes black nylon strap and 14 1/8" overall black composition one piece construction Hammond FE9 training knife with false blade. Designed by Jim Hammond with Arcenio James Advincula's concepts. Made in China. |
| Availability: In Stock |
|
|
 |
CR5341 CRKT Ikoma Carajas Pocket Knife |
| 4 1/4" closed linerlock. 3 1/8" satin finish 12C27 Sandvik stainless Partial Veff Flat Top serrated drop point blade with drilled hole design and extended tang. Hardened to 59-61 HRC. Features the IKBS pivot system. Black G-10 handles with a full length, treaded backspacer for a tactile grip. Lanyard hole. Stainless pocket clip with slot cutout. Designed by Flavio Ikoma. Made in China. |
| Availability: In Stock |
|
|
 |
CR5580 CRKT HUG Framelock Pocket Knife |
| 3 5/8" closed framelock. 420 J2 stainless partially serrated bead blast finish blade with thumb stud. Bead blast finish stainless frame with black Zytel onlay. Stainless pocket clip. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR5590 CRKT HUG II Framelock Pocket Knife |
| 2 7/8" closed framelock. 420 J2 stainless bead blast finish blade with thumb stud. Bead blast finish stainless frame with black Zytel onlay. Stainless pocket clip. Made in Taiwan. |
| Availability: Out of Stock |
$17.98 |
| $17.08 |
|
|
|
|
 |
CR5590K CRKT HUG II Framelock Pocket Knife |
| 2 7/8" closed framelock. 1 5/8" black titanium nitride finish 420J2 stainless modified spear point blade with thumb stud. Hardened to 51-53 HRC. Black titanium nitride finish 420J2 stainless skeletonized frame with a black Zytel® onlay. Black stainless pocket clip with slot cutout design. Made in Taiwan. |
| Availability: In Stock |
|
|
|
|
|
|
 |
CR6063 CRKT Pocket Classic Stockman Pocket Knife |
| 3 1/2" closed. Features high-carbon stainless clip, spey and sheepsfoot blades. Burnt amber jigged bone handles with nickel silver bolsters and CRKT inlay shield. Made in China. |
| Availability: In Stock |
|
|
 |
CR6064 CRKT Pocket Classic Trapper Pocket Knife |
| 3 1/2" closed. Features high-carbon stainless clip and spey blades. Burnt amber jigged bone handles with nickel silver bolsters and CRKT inlay shield. Made in China. |
| Availability: In Stock |
|
|
 |
CR6065 CRKT Pocket Classic Whittler Pocket Knife |
| 3 1/2" closed. Features high-carbon stainless large clip, small clip and pen blades. Burnt amber jigged bone handles with nickel silver bolsters and CRKT inlay shield. Made in China. |
| Availability: In Stock |
|
|
|
|
 |
CR6113KG CRKT Prowler Linerlock Pocket Knife |
| 4 1/2" closed linerlock. 3 1/8" black finish stainless partially serrated blade. Features LAWKS blade locking system. Textured black Zytel handles. Black finish stainless pocket clip. Designed by Peter Marzitelli. Made in China. |
| Availability: In Stock |
|
|
 |
CR6444B CRKT Edgie 2 Lockback Pocket Knife |
| 4 1/4" closed self-sharpening InterFrame lockback. 5Cr15MoV stainless dual-edged wharncliff blade with thumb slot. A unique diamond sharpening strip is built in the frame. When the blade is closed, this causes a tiny burr to form, acting as a microserration, which helps cutting action. This makes the Edgie ideal for cutting cardboard boxes, rope, cord, garden stalks, etc. Stainless frame with black Zytel scales and blue insert. Textured, grooved TPR insert. Removable stainless pocket clip. Designed by Maj. Howard Pope in collaboration with custom knifemaker Steve Jernigan. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR4003 CRKT Bladelock Pocket Knife |
| 4" closed. 3 3/8" stainless blade. Press thumb stud to open and close the blade. These knives were originally Demonstration Models: Blade is etched Demonstration Model - Not for Resale, Dull Cutting Edge, Dull Blade Tip. The blade has been sharpened and the knives are now offered for sale. Matte finish stainless handles with textured black Zytel onlays. Stainless pocket clip. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CRBIOTAC Columbia River Van Hoy BIOTAC |
| Lightweight inverted fixed blade carry harness. Works with any molded sheath with eyelets. Fully adjustable, even when in use. Comfortable for extended carry. Front, back and side high/low carry options. Ambidextrous, draw with either hand. Works with small and large knives. Wear invisibly under clothes. Designed by Ed Van Hoy. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR2012R Columbia River Ringed Razel |
| A cross between a chisel and a razor with two edges - one for pushing and one for cutting. 7 1/2" overall. 3" 9Cr18MoV stainless blade with 3" and 1 1/4" edges. Very thick, full tang blade. Contoured black micarta handles with ring pommel. Custom fit black Kydex belt sheath with stainless boot/belt clip. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2013 Columbia River Razel SS7 |
| A cross between a chisel and a razor with a knife handle results in two edges - one for pushing and one for cutting. Cutting edges measure 1 3/4" and 7 1/4" with 3 3/4" Veff serrated top edge. Bottle opener. Very thick full tang blades made of 9Cr18MoV stainless steel. Contoured micarta handles. Custom fit Kydex sheath. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2385 Columbia River Folts Minimalist Knife |
| 5" overall. 2" 5Cr15MoV stainless blade. Contoured green and black micarta handles. Braided fob. Custom fitted Zytel sheath with neck paracord. Made in China. |
| Availability: In Stock |
|
|
 |
CR2387 Columbia River Folts Minimalist Bowie Knife |
| 5 1/8" overall. 2" 5Cr15MoV stainless bowie style clip point blade with bead blast finish. Full tang. Green-black Micarta scales with three finger choils. Friction grooved top edge. Black braided fob. Black Zytel sheath with neck paracord. Also included is a detachable belt clip. Made in China. |
| Availability: In Stock |
|
|
 |
CR2840 Columbia River Kommer 2-Shot Knife |
| 7 1/4" overall. 3" 12C27 Sandvik stainless blade. Full tang. Orange G-10 handles. Polished stainless bolster. Custom brown leather sheath is convertible left or right. Horizontal carry keeps sheath out of the way of rifles and gear. Two separate front compartments for carrying two spare cartridges. Russ Kommer design. Made in China. |
| Availability: In Stock |
|
|
 |
CR2850 Columbia River Kommer Bez Tine Hunter Knife |
| 7 3/8" overall. 3 1/4" 1. 4115 high carbon stainless skinner blade with mirror polished finish. Full tang. Walnut handles with stainless bolster and deep finger choils. Leather belt sheath. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2851 Columbia River Kommer PTS |
| A high carbon steel wedge with a chisel edge which will neatly split the cartilage at the pelvic bone seam aided by the tap of a nearby rock. It is also coated with 400 diamond grit for use as a sharpener. 4 1/2" overall. Black cordura belt sheath. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2860 Columbia River Kommer Brow Tine Hunter Knife |
| 7 1/4" overall. 2 7/8" 9Cr18 high carbon stainless drop point blade with mirror polish finish. Full tang. Stag handles with stainless bolsters and mosaic pins. Brown leather belt sheath. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR3008 Columbia River Big Eddy Fillet Knife |
| 12" overall. 6 3/4" satin finished high carbon stainless filet blade features 1 3/4" serrated section. Black double injection molded Kraton rubber handle with lanyard hole. Black molded plastic belt sheath with drain hole. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR3010 Columbia River Big Eddy Fillet Knife |
| 14 1/2" overall. 9" satin finished high carbon stainless filet blade features 1 3/4" serrated section. Black double injection molded Kraton rubber handle with lanyard hole. Black molded plastic belt sheath with drain hole. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR5005 Columbia River Crossover Shears |
| 9 1/2" overall. 5 1/2" 3Cr13 stainless blades. Features shears with boning notch, kitchen knife, bottle opener, screwdriver and grill cleaner. Zytel handles. Full tang. Made in China. |
| Availability: In Stock |
|
|
 |
CR2310GT CRKT Stiff KISS Knife |
| 7 1/4" overall. 3 1/4" partially serrated tanto blade. One-piece stainless construction with finger notch and bead blast finish. Black cord wrapped handle. Black cord lanyard. Molded black Zytel® sheath with black finish stainless belt/boot clip. Ed Halligan design. Made in China. |
| Availability: Out of Stock |
$19.56 |
| $18.58 |
|
|
|
|
 |
CRVEFF1 Columbia River Veff Sharp Sharpener |
| Veff Sharp Portable Multi-Purpose Field and Bench Sharpener. The system includes a black anodized knurled aluminum handle and two threaded 600-grit diamond-coated sharpening rods. The smaller rod has three 2" straight sections in sizes 3/32", 3/16", and 1/4". The larger rod has three straight sections in sizes 11/32", 1/2" and 5/8". The larger rod also has a 6" flat side. The handle and rods store neatly in black nylon storage pouch. Effective on most serrations. Also works on guthook knives, seat belt cutters, plain edge knives, wood chisels, wood carving and lathe tools, router bits, punches, scissors and saw chain. Designed by Tom Veff. Made in China. |
| Availability: In Stock |
|
|
 |
CR6521 CRKT Liong Mah Design Knife |
| 3 5/8" closed slip joint. 2 3/4" satin finish 8Cr14MoV stainless drop point blade with oversized nail nick. Hardened to 58-59 HRC. Black fingergrooved smooth G-10 handles. Stainless pocket clip. Black nylon lanyard. Designed by Liong Mah. #6. Partial Veff Flat Top serrated blade. Made in China. |
| Availability: In Stock |
|
|
 |
CRK700KXP Columbia River Ken Onion Skinner Knife |
| 8" overall. 3 5/8" hollow-ground Bohler K110 stainless blade with polished satin finish. Twin-Fused handles with Zytel core and black soft textured TPR outside for sure-grip. Black and white corded lanyard. Custom leather sheath is molded and fitted to grip the scales and lock the knife in position until needed. It can be worn left or right, inside or outside the belt. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR3015C Columbia River Small Fillet Knife |
| 9 3/4" overall. 4 5/8" 5Cr15MoV stainless satin finish fillet blade with hand ground scallops that keep the fillets from sticking to the blade. Black textured TPR handles for grip. Lanyard hole. Black molded polypropylene sheath. Hang packaged. Ideal for panfish, bass and trout. Russ Kommer design. Made in China. |
| Availability: In Stock |
|
|
 |
CR3017C Columbia River Medium Fillet Knife |
| 12 1/8" overall. 7 1/8" 5Cr15MoV stainless satin finish fillet blade with hand ground scallops that keep the fillets from sticking to the blade. Black textured TPR handles for grip. Lanyard hole. Black molded polypropylene sheath. Hang packaged. Ideal for steelhead, salmon and walleye. Russ Kommer design. Made in China. |
| Availability: In Stock |
|
|
 |
CR3019C Columbia River Large Fillet Knife |
| 14 3/8" overall. 9 3/8" 5Cr15MoV stainless satin finish fillet blade with hand ground scallops that keep the fillets from sticking to the blade. Black textured TPR handles for grip. Lanyard hole. Black molded polypropylene sheath. Hang packaged. Ideal for salmon, tuna and halibut. Russ Kommer design. Made in China. |
| Availability: In Stock |
|
|
 |
CRZ2032S Columbia River Small Knife Storage Case |
| Measures approximately 13 1/2" x 9 1/4". Black nylon exterior with CRKT logo. Black web carrying handles. Padded interior with gray velvet lining and center divider. Holds 22 folding knives. Ideal for display, storage or travel. Bulk packed. Made in China. |
| Availability: Out of Stock |
|
|
 |
CR1060 CRKT Enticer Linerlock Pocket Knife |
| 3 7/8" closed linerlock. 3 1/8" satin finish 1.4034 stainless drop point blade. Blade opening is quick with the patented Fire Safe®, which has been incorporated into a thumb disk for the first time. Simply depress the disk while pressuring the blade open and the system releases the blade fully open. Add that to the patented OutBurst® assisted opening system and you have safe, reliable, quick opening knife. Hardened to 56-58 HRC. Black G-10 backspacer with stainless sides. Black milled textured glass filled nylon handles. Stainless pocket clip. Designed by MJ Lerch. Made in China. |
| Availability: In Stock |
|
|
 |
CR1061 CRKT Enticer Linerlock Pocket Knife |
| 3 7/8" closed linerlock. 3 1/4" partially serrated satin finish stainless blade with OutBurst® assisted opening. Features FireSafe® blade opening mechanism which is incorporated into a thumb disk. To open, simply depress the disk while pressuring the blade open and the system releases the blade fully open. Black molded glass filled nylon handles with milled texture. Stainless pocket clip. M. J. Lerch design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR2010D CRKT C/K Dragon Fighting Knife |
| 9 1/4" overall. 4 5/8" 9Cr18 stainless wharncliff blade with satin finish. Full, extended tang with lanyard hole. Grooved brown G-10 handles. Molded black Zytel® sheath with multi-position attachment clip. Crawford/Kasper design. Made in China. |
| Availability: In Stock |
|
|
 |
CR2010DK CRKT C/K Dragon Fighting Knife |
| 9 1/4" overall. 4 5/8" 9Cr18 stainless wharncliff blade with black finish. Full, extended tang with lanyard hole. Grooved brown G-10 handles. Molded black Zytel® sheath with multi-position attachment clip. Crawford/Kasper design. Made in China. |
| Availability: In Stock |
|
|
 |
CR2055K CRKT KERT Keyring Emergency Rescue Tool |
| 2.48" overall. One piece 8Cr13MoV stainless construction. Hardened to 58-59 HRC. Features integrated seat belt cutter, oxygen tank opener, 1/4" wrench, bottle opener, flathead screwdriver, lanyard hole and keyring. Black form fit, vinyl slip-sheath. Designed by Ray Kirk. Made in China. |
| Availability: In Stock |
|
|
 |
CR2112GD CRKT M21 Carson Folder Knife |
| 4 1/4" closed InterFrame. 3" 8Cr14MoV stainless Veff partially serrated spear point blade with tan Ti-Nitride finish and dual thumb studs. Desert tan G10 handles. Removable/reversible black finish stainless pocket clip. Features Carson Flipper and LAWKS® safety system. Designed by Kit Carson. Made in China. |
| Availability: In Stock |
|
|
 |
CR2208 CRKT Hammond FE7 Knife |
| 12 1/2" overall. 7 3/8" black powder coated 01 tool steel fighter blade with sharpened top edge. Black G-10 finger groove handles. Oversized lanyard hole. High-strength nylon glass fiber reinforced sheath with lashing holes, MOLLE clip and leg strap. Comes with CR2210T Hammond FE9 Training Knife with one-piece thermo plastic construction. 14 1/4" overall with 9" unsharpened training blade and finger grooved handle. Jim Hammond and Arcenio James Advincula design. Made in China. |
| Availability: In Stock |
|
|
 |
CR5006 Columbia River Crossover Shear |
| 9 5/8" overall. 3Cr13 stainless blades. Twist the Crossover handle to release the scissors pair, press the flexible scissors finger loop back into the handle, and you have a quality Razor-Sharp knife. Also has a jar and bottle opener, plus an extended lid lifter/screwdriver. Full tang high carbon stainless frame underlying the knife/scissors, with ergonomic injection-molded Zytel handles. The scissors finger loop is made of flexible TPR with a stainless steel strap core for long life. Leather sheath. Made in China. |
| Availability: Out of Stock |
|
|
 |
CRK406BXP CRKT Ripple Stainless Pocket Knife |
| 4 3/8" closed framelock. 3 1/8" satin finish Acuto 440 stainless standard edge modified drop point blade with high hollow grind and flipper. Features IKBS (internal knife ball bearing) fast opening action. Bronze titanium nitride coated stainless handles. Handle surfaces are treaded with "ripple" grooves for grip. Lanyard hole. Removable stainless pocket clip. Ken Onion design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR9300TL CRKT Onion Para-Saw Bracelet |
| Braided nylon paracord construction with a plastic encased, tungsten carbide coated wire saw woven into the braided cord. Wire saw measures approximately 18.5". Black quick-release snap buckle. Easily secures to wrist or may be attached to a backpack or other gear. Unraveled cord is useful for securing, lashing, or paring down. Wire saw could be used to cut limbs, wood, or for numerous other tasks in an emergency or survival situation. Ken Onion design. Open design hang packaging. Weight 0.9 oz. Note: Measurements given may vary slightly. Size: Large. Open overall length: 10.5". Color: Tan. Contains 141" of paracord (unbraided). Made in China. |
| Availability: In Stock |
|
|
 |
CR9300TS CRKT Onion Para-Saw Bracelet |
| Braided nylon paracord construction with a plastic encased, tungsten carbide coated wire saw woven into the braided cord. Wire saw measures approximately 18.5". Black quick-release snap buckle. Easily secures to wrist or may be attached to a backpack or other gear. Unraveled cord is useful for securing, lashing, or paring down. Wire saw could be used to cut limbs, wood, or for numerous other tasks in an emergency or survival situation. Ken Onion design. Open design hang packaging. Weight 0.9 oz. Note: Measurements given may vary slightly. Size: Small. Open overall length: 9.5". Color: Tan. Contains 118" of paracord (unbraided). Made in China. |
| Availability: In Stock |
|
|
 |
CR9800 CRKT MOLLE-LOK - Pack of 2 |
| Black polymer construction is designed for strength and durability and as an optional attaching device for military and law enforcement. Will fit all MOLLE compatible gear including body armor or load bearing equipment, vests, tactical bags, and pouches. Easily mounted. Length: 4.0". Width: .875". Weight 1.1 oz. Comes with (4) stainless flat head Phillips screws with machine threaded brass and glass filled nylon receivers. No need for special tools. Hang packaged. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CRF1000 CRKT Williams Personal Defense Flashlight |
| 4 1/4" overall. Modes: High - 100 lumens; strobe. Low - 5 lumens; 10 lumens; 50 lumens; SOS. Projected lens reflectors. Uses one AA battery (included). Black anodized knurled aluminum housing with CRKT logo and removable black stainless wire pocket clip. White LED. Black rubberized push button tailcap switch. Designed by James Williams. Ideal for outdoor use, personal safety, self-defense, everyday-carry and tactical applications. Personal Safety Flashlight Modes - Light Side Bevel, Slide Position 1 (Pushed In) - Low Mode. 1st click - results in low light beam of 5 lumens. 2nd click - turns light off. 3rd click - results in mid-light beam of 10 lumens. 4th click - turns light off. 5th click - results in maximum light beam of 50 lumens. 6th click - turns light off. 7th click - results in S.O.S. mode at 50 lumens. 8th click - turns light off. In low mode, after the flashlight has been off for two seconds or more, the flashlight will reset back to the initial start settings. Light Side Bevel, Slide Position 2 (Pulled Out) - High Mode. 1st click - results in maximum light beam of 100 lumens. 2nd click - turns light off. Depress button twice quickly (without fully clicking the button) results in blinding strobe light of 100 lumens. Full click through while "in strobe" results in constant blinding strobe of 100 lumens. Next click turns light off. Tactical Applications Flashlight Modes - Light Side Bevel, Slide Position 1 (Pushed In) - Low Mode. 1st click - results in low light beam of 5 lumens. 2nd click - turns light off. 3rd click - results in mid-light beam of 10 lumens. 4th click - turns light off. 5th click - results in maximum light beam of 75 lumens. 6th click - turns light off. 7th click - results in S.O.S. mode at 75 lumens. 8th click - turns light off. In low mode, after the flashlight has been off for two seconds or more, the flashlight will reset back to the initial start settings. Light Side Bevel, Slide Position 2 (Pulled Out) - High Mode. 1st click -results in maximum light beam of 320 lumens. 2nd click - turns light off. Depress button twice quickly (without fully clicking the button) results in blinding strobe light of 320 lumens. Full click through while "in strobe" results in constant blinding strobe of 320 lumens. Next click turns light off. Made in China. |
| Availability: In Stock |
|
|
 |
CRF1010 CRKT Williams Tactical Application Flashlight |
| 4 3/4" overall. Modes: High - 320 lumens; strobe. Low - 5 lumens; 10 lumens; 75 lumens; SOS. Uses two CR123A batteries (included). Personal Safety Flashlight Modes - Light Side Bevel, Slide Position 1 (Pushed In) - Low Mode. 1st click - results in low light beam of 5 lumens. 2nd click - turns light off. 3rd click - results in mid-light beam of 10 lumens. 4th click - turns light off. 5th click - results in maximum light beam of 50 lumens. 6th click - turns light off. 7th click - results in S.O.S. mode at 50 lumens. 8th click - turns light off. In low mode, after the flashlight has been off for two seconds or more, the flashlight will reset back to the initial start settings. Light Side Bevel, Slide Position 2 (Pulled Out) - High Mode. 1st click - results in maximum light beam of 100 lumens. 2nd click - turns light off. Depress button twice quickly (without fully clicking the button) results in blinding strobe light of
100 lumens. Full click through while "in strobe" results in constant blinding strobe of 100 lumens.
Next click turns light off. Tactical Applications Flashlight Modes - Light Side Bevel, Slide Position 1 (Pushed In) - Low Mode. 1st click - results in low light beam of 5 lumens. 2nd click - turns light off. 3rd click - results in mid-light beam of 10 lumens. 4th click - turns light off. 5th click - results in maximum light beam of 75 lumens. 6th click - turns light off. 7th click - results in S.O.S. mode at 75 lumens. 8th click - turns light off. In low mode, after the flashlight has been off for two seconds or more, the flashlight will reset back to the initial start settings. Light Side Bevel, Slide Position 2 (Pulled Out) - High Mode. 1st click -results in maximum light beam of 320 lumens. 2nd click - turns light off. Depress button twice quickly (without fully clicking the button) results in blinding strobe light of 320 lumens. Full click through while "in strobe" results in constant blinding strobe of 320 lumens. Next click turns light off. Made in China. |
| Availability: In Stock |
|
|
 |
CRK100KKP CRKT Onion Redemption Knife |
| 15" overall. 10" black powder coated 01 tool steel modified drop point blade with a recurve edge. Hardened to 56-58 HRC. Three-quarter tang. Black smooth G-10 handle with drilled hole design. Lanyard hole. Black nylon belt sheath with protective insert, leg strap/ties and front velcro accessory pocket. Designed by Ken Onion. Made in China. |
| Availability: In Stock |
|
|
 |
CRK220KKP CRKT Foresight Pocket Knife |
| 5 1/8" closed. 5 1/8" closed linerlock. 3 3/4" AUS-8 standard edge modified drop point blade with black Ti-Ni finish. Finger grooved black finish aluminum handles. Lanyard hole. Black finish stainless pocket clip. Ken Onion design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CRK220KKS CRKT Foresight Pocket Knife |
| 5 1/8" closed. 5 1/8" closed linerlock. 3 3/4" AUS-8 partially serrated modified drop point blade with black Ti-Ni finish. Finger grooved black finish aluminum handles. Lanyard hole. Black finish stainless pocket clip. Ken Onion design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CRK240XXP CRKT Swindle Framelock Pocket Knife |
| 4 1/4" closed framelock. 3 1/4" satin finish stainless modified wharncliffe blade with extended tang. Features the IKBS pivot system. Bead blast finish 2Cr13 stainless handles. "Tensioned" stainless pocket clip. Designed by Ken Onion. 8Cr14MoV stainless blade. Hardened to 58-59 HRC. Smooth front handle. Made in China. |
| Availability: Out of Stock |
$42.75 |
| $40.61 |
|
|
|
|
 |
CRK401BXP CRKT Ripple Stainless Pocket Knife |
| 3 3/4" closed framelock. 2 3/4" satin finish Acuto 440 stainless modified drop point blade with high hollow grind and flipper. Features IKBS (internal knife ball bearing) fast opening action. Bronze titanium nitride coated stainless handles. Handle surfaces are treaded with "ripple" grooves for grip. Lanyard hole. Removable stainless pocket clip. Ken Onion design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CRK401GXP CRKT Ripple Stainless Pocket Knife |
| 3 3/4" closed framelock. 2 3/4" satin finish Acuto 440 stainless modified drop point blade with high hollow grind and flipper. Features IKBS (internal knife ball bearing) fast opening action. Gray titanium nitride coated stainless handles. Handle surfaces are treaded with "ripple" grooves for grip. Lanyard hole. Removable stainless pocket clip. Ken Onion design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR6444K CRKT Edgie 2 Lockback Pocket Knife |
| 4 1/4" closed self-sharpening InterFrame lockback. 5Cr15MoV stainless dual-edged wharncliff blade with thumb slot. A unique diamond sharpening strip is built in the frame. When the blade is closed, this causes a tiny burr to form, acting as a microserration, which helps cutting action. This makes the Edgie ideal for cutting cardboard boxes, rope, cord, garden stalks, etc. Stainless frame with black Zytel scales and black insert. Textured, grooved TPR insert. Removable stainless pocket clip. Designed by Maj. Howard Pope in collaboration with custom knifemaker Steve Jernigan. Made in China. |
| Availability: In Stock |
|
|
|
|
 |
CR9300DS CRKT Onion Para-Saw Bracelet |
| Braided nylon paracord construction with a plastic encased, tungsten carbide coated wire saw woven into the braided cord. Wire saw measures approximately 18.5". Black quick-release snap buckle. Easily secures to wrist or may be attached to a backpack or other gear. Unraveled cord is useful for securing, lashing, or paring down. Wire saw could be used to cut limbs, wood, or for numerous other tasks in an emergency or survival situation. Ken Onion design. Open design hang packaging. Weight 0.9 oz. Note: Measurements given may vary slightly. Size: Small. Open overall length: 9.5". Color: Green. Contains 118" of paracord (unbraided). Made in China. |
| Availability: In Stock |
|
|
 |
CRK406BXS CRKT Ripple Stainless Pocket Knife |
| 4 3/8" closed framelock. 3 1/8" satin finish Acuto 440 stainless partially serrated modified drop point blade with high hollow grind and flipper. Features IKBS (internal knife ball bearing) fast opening action. Bronze titanium nitride coated stainless handles. Handle surfaces are treaded with "ripple" grooves for grip. Lanyard hole. Removable stainless pocket clip. Ken Onion design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CRK406GXP CRKT Ripple Stainless Pocket Knife |
| 4 3/8" closed framelock. 3 1/8" satin finish Acuto 440 stainless standard edge modified drop point blade with high hollow grind and flipper. Features IKBS (internal knife ball bearing) fast opening action. Gray titanium nitride coated stainless handles. Handle surfaces are treaded with "ripple" grooves for grip. Lanyard hole. Removable stainless pocket clip. Ken Onion design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CRK406GXS CRKT Ripple Stainless Pocket Knife |
| 4 3/8" closed framelock. 3 1/8" satin finish Acuto 440 stainless partially serrated modified drop point blade with high hollow grind and flipper. Features IKBS (internal knife ball bearing) fast opening action. Gray titanium nitride coated stainless handles. Handle surfaces are treaded with "ripple" grooves for grip. Lanyard hole. Removable stainless pocket clip. Ken Onion design. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CRK480CXP CRKT Shenanigan Camo Pocket Knife |
| 4 7/8" closed linerlock. 3 1/4" bead blast finish AUS-8 stainless modified drop point blade with a slight recurve and swedged top edge. Hardened to 58-59 HRC. Fingergrooved Realtree camo glass filled nylon handles. Lanyard hole. Black stainless pocket clip. Designed by Ken Onion. Realtree Xtra Camo handles. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CRK700KXPC CRKT Ken Onion Skinner Knife |
| 8" overall. 3 5/8" hollow-ground Bohler K110 stainless blade with polished satin finish. Twin-Fused handles with Zytel® core and black soft textured TPR outside for sure-grip. Black and white corded lanyard. Custom leather sheath is molded and fitted to grip the scales and lock the knife in position until needed. It can be worn left or right, inside or outside the belt. Clam Packed. Made in China. |
| Availability: In Stock |
|
|
 |
CRM402W CRKT Carson M4 Linerlock Pocket Knife |
| 3 3/4" closed linerlock. 3 1/8" 8Cr13MoV stainless blade with dual thumb studs. Burl scales. Stainless bolsters. Stainless pocket clip. LAWKS safety. Made in China. |
| Availability: In Stock |
|
|
 |
SH1083 CRKT Tactical Fixed Blade Knife Belt Sheath |
| Heavy tan nylon construction. Fits fixed blade knife with up to 5 1/4" blade. Hardshell liner. Front of sheath has two utility pockets, one with velcro closure. Two adjustable heavy duty leg straps. Back of sheath has CRKT logo. Bulk packed. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
SH1084 CRKT Tactical Fixed Blade Knife Belt Sheath |
| Heavy tan nylon construction. Fits fixed blade knife with up to 7" blade. Hardshell liner. Front of sheath has two utility pockets, one with velcro closure. Two adjustable heavy duty leg straps. Back of sheath has CRKT logo. Bulk packed. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
SH1085 CRKT Tactical Fixed Blade Knife Belt Sheath |
| Heavy black nylon construction. Fits fixed blade knife with up to 7" blade. Hardshell liner. Front of sheath has two utility pockets, one with velcro closure. Two adjustable heavy duty leg straps. Back of sheath has CRKT logo. Bulk packed. Made in Taiwan. |
| Availability: In Stock |
|
|
|
|
 |
SH1088 CRKT Fixed Blade Sheath |
| Black leather belt sheath fits fixed blade knife with up to 6 1/2" blade. 2nd Quality. Made in China. |
| Availability: In Stock |
|
|
 |
SH1090 CRKT Fixed Blade Sheath |
| Black leather belt sheath fits fixed blade knife with up to 3 3/4" blade. Made in China. |
| Availability: Out of Stock |
$3.88 |
| $3.76 |
|
|
|
|
|
|
 |
CR9030 CRKT Extortion Auto Safety Tool |
| 3" overall. Black composition construction. Attaches to any standard seat belt with a simple folding clasp. Easily removed for use. Features integrated seat belt cutter, Tungsten carbide window breaker and a bright L.E.D. flashlight. Light uses one replaceable CR2032 3-volt lithium battery. Designed by Russ Komer. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
|
|
 |
CR6612GN CRKT Mt. Rainier Linerlock Pocket Knife |
| 4" closed linerlock. 2 3/4" stainless partially serrated modified drop point blade with dual thumb studs and bead blast finish. Features LAWKS blade locking system. Textured black G-10 handles with machined hole cutouts. Black finish stainless pocket clip. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR6773Z CRKT Crawford Kasper Linerlock Pocket Knife |
| 5 3/8" closed linerlock. 3 7/8" 8Cr14MoV stainless modified drop point blade with gray corrosion-resistant coating. Black Zytel® handles. Lanyard hole. Black finish stainless pocket clip. Made in China. |
| Availability: In Stock |
|
|
 |
CR6783Z CRKT Crawford Kasper Linerlock Pocket Knife |
| 5 3/8" closed linerlock. 3 7/8" 8Cr14MoV stainless partially serrated modified drop point blade with gray corrosion-resistant coating. Black Zytel® handles. Lanyard hole. Black finish stainless pocket clip. Made in China. |
| Availability: In Stock |
|
|
 |
CR6803D CRKT Ryan Model 7 Linerlock Pocket Knife |
| 4 5/8" closed linerlock. 3 3/8" satin finish 420 J2 stainless standard edge blade with oversized dual thumb studs. Thumb ridge. Satin finish frame with desert tan Zytel handles with zigzag design for strength. Deep finger choil for exceptional grip. L.A.W.K.S.® locking mechanism. Lanyard hole. Stainless pocket clip. Made in China. |
| Availability: In Stock |
|
|
 |
CR6803DZ CRKT Ryan Model 7 Linerlock Pocket Knife |
| 4 5/8" closed linerlock. 3 3/8" black finish 420 J2 stainless standard edge blade with oversized dual thumb studs. Thumb ridge. Black finish frame with desert tan Zytel handles with zigzag design for strength. Deep finger choil for exceptional grip. L.A.W.K.S.® locking mechanism. Lanyard hole. Stainless pocket clip. Made in China. |
| Availability: In Stock |
|
|
 |
CR6803Z CRKT Ryan Model 7 Linerlock Pocket Knife |
| 4 1/2" closed tactical linerlock. 3 1/2" 8Cr14MoV stainless modified drop point blade with gray corrosion-resistant coating. Blade features enlarged dual thumb studs which allow for positive opening. LAWKS® safety. Black textured Zytel® handle with zig-zag design for strength. Lanyard hole. Removable stainless belt clip. Designed by Steve Ryan. Made in China. |
| Availability: In Stock |
|
|
 |
CR6813D CRKT Ryan Model 7 Linerlock Pocket Knife |
| 4 5/8" closed linerlock. 3 3/8" satin finish 420 J2 stainless partially serrated blade with oversized dual thumb studs. Thumb ridge. Satin finish frame with desert tan Zytel handles with zigzag design for strength. Deep finger choil for exceptional grip. L.A.W.K.S.® locking mechanism. Lanyard hole. Stainless pocket clip. Made in China. |
| Availability: In Stock |
|
|
 |
CR6813DZ CRKT Ryan Model 7 Linerlock Pocket Knife |
| 4 5/8" closed linerlock. 3 3/8" black finish 420 J2 stainless partially serrated blade with oversized dual thumb studs. Thumb ridge. Black finish frame with desert tan Zytel handles with zigzag design for strength. Deep finger choil for exceptional grip. L.A.W.K.S.® locking mechanism. Lanyard hole. Stainless pocket clip. Made in China. |
| Availability: In Stock |
|
|
 |
CR6813Z CRKT Ryan Model 7 Linerlock Pocket Knife |
| 4 1/2" closed tactical linerlock. 3 1/2" 8Cr14MoV stainless partially serrated modified drop point blade with gray corrosion-resistant coating. Blade features enlarged dual thumb studs which allow for positive opening. LAWKS® safety. Black textured Zytel® handle with zig-zag design for strength. Lanyard hole. Removable stainless belt clip. Designed by Steve Ryan. Made in China. |
| Availability: In Stock |
|
|
 |
CR6820 CRKT Lift Off 2 Linerlock Pocket Knife |
| 4" closed interframe linerlock. Standard edge AUS-8 stainless hollow ground drop point blade with swedged top edge and thumb stud. Features OutBurst assisted opening with Fire Safe mechanism. When closed, the blade is safely locked by the Fire Safe pin. It cannot be opened until the safety button on the end of the thumb stud is firmly depressed and the thumb stud is nudged outward. Textured black Zytel handles. Front handle features a stainless insert with arrow cutout pattern. Stainless pocket clip. Made in Taiwan. |
| Availability: In Stock |
|
|
|
|
 |
CR9300KS CRKT Onion Para-Saw Bracelet |
| Braided nylon paracord construction with a plastic encased, tungsten carbide coated wire saw woven into the braided cord. Wire saw measures approximately 18.5". Black quick-release snap buckle. Easily secures to wrist or may be attached to a backpack or other gear. Unraveled cord is useful for securing, lashing, or paring down. Wire saw could be used to cut limbs, wood, or for numerous other tasks in an emergency or survival situation. Ken Onion design. Open design hang packaging. Weight 0.9 oz. Note: Measurements given may vary slightly. Size: Small. Open overall length: 9.5". Color: Black. Contains 118" of paracord (unbraided). Made in China. |
| Availability: In Stock |
|
|
 |
CR7912GK CRKT Mini Special Forces Cruiser Pocket Knife |
| 4 1/2" closed linerlock. 3 1/4" black finish stainless partially serrated clip blade with dual thumb studs and extended tangs. Features LAWKS blade locking system. Textured black Zytel handles. Lanyard hole. Black finish stainless pocket clip. Designed by Jim Hammond. Made in China. |
| Availability: In Stock |
|
|
 |
CR9300KL CRKT Onion Para-Saw Bracelet |
| Braided nylon paracord construction with a plastic encased, tungsten carbide coated wire saw woven into the braided cord. Wire saw measures approximately 18.5". Black quick-release snap buckle. Easily secures to wrist or may be attached to a backpack or other gear. Unraveled cord is useful for securing, lashing, or paring down. Wire saw could be used to cut limbs, wood, or for numerous other tasks in an emergency or survival situation. Ken Onion design. Open design hang packaging. Weight 0.9 oz. Note: Measurements given may vary slightly. Size: Large. Open overall length: 10.5". Color: Black. Contains 141" of paracord (unbraided). Made in China. |
| Availability: In Stock |
|
|
 |
CR9094C CRKT Get-A-Way Driver |
| 3 3/4" overall with driver. Stainless front handle with black composition casing. Features two flathead and two Philips screwdriver bits, bit carrier, bit carrier wrench, white LED flashlight, bottle/jar opener, 10mm wrench and oxygen bottle wrench. Use the handle as an angle driver when you need more torque. Includes attachment clip. Uses two CR927 3V batteries (included). Works great with other i.D. Works products. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR9096 CRKT Microtool and Sharpener |
| 2 3/4" overall without keychain. Black aluminum housing. Features carbide knife sharpening blades, seat belt cutter with large flathead screwdriver, bottle opener and large keyring. Hang packaged. Designed by Tom Stokes. Made in China. |
| Availability: Out of Stock |
$14.08 |
| $13.37 |
|
|
|
|
 |
CR9100BL CRKT i.D. Works® Series Eat'N Tool |
| 4" overall. One piece stainless construction with food grade non-stick blue corrosion-resistant coating. Features spoon, fork, bottle opener, screwdriver/pry bar, and metric wrenches. Attachment clip. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR9100C CRKT i.D. Works® Series Eat'N Tool |
| 4" overall. One piece stainless construction. Bead blast finish. Features spoon, fork, bottle opener, screwdriver/pry bar, metric wrenches. Carabiner clip. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR9100FC CRKT i.D. Works® Series Eat'N Tool |
| 4" overall. One piece stainless construction with food grade non-stick blue corrosion-resistant coating. Features spoon, fork, bottle opener, screwdriver/pry bar, and metric wrenches. Attachment clip. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR9100KC CRKT i.D. Works® Series Eat'N Tool |
| 4" overall. One piece stainless construction. Black Teflon finish. Features spoon, fork, bottle opener, screwdriver/pry bar, metric wrenches. Carabiner clip. Made in China. |
| Availability: In Stock |
|
|
 |
CR9100TC CRKT Tangerine Eat'N Tool |
| 4" overall. One piece stainless construction. Features spoon, fork, bottle opener, screwdriver/pry bar, metric wrenches (10mm, 8mm and 6mm), lanyard hole and attachment clip. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR9100YC CRKT Yellow Eat'N Tool |
| 4" overall. One piece stainless construction. Features spoon, fork, bottle opener, screwdriver/pry bar, metric wrenches (10mm, 8mm and 6mm), lanyard hole and attachment clip. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR9110C CRKT Eat'N Tool XL |
| Bead. 6 1/8" overall. One piece 3Cr13 stainless construction with bead blast finish. Features: spoon/fork; bottle opener; can opener; screwdriver/pry tip; wrenches (1/2", 7/16", 3/8", 5/16", 1/4", 11mm and 8mm); and attachment clip. This is a larger version of the original Eat'N Tool® and features larger spoon/fork and longer handle surface. Weighs 2.7 oz. Designed by Liong Mah. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR9110KC CRKT Eat'N Tool X |
| Black. 6 1/8" overall. One piece 3Cr13 stainless construction with black finish. Features: spoon/fork; bottle opener; can opener; screwdriver/pry tip; wrenches (1/2", 7/16", 3/8", 5/16", 1/4", 11mm and 8mm); and attachment clip. This is a larger version of the original Eat'N Tool® and features larger spoon/fork and longer handle surface. Weighs 2.7 oz. Designed by Liong Mah. Hang packaged. Made in China. |
| Availability: In Stock |
|
|
 |
CR9300DL CRKT Onion Para-Saw Bracelet |
| Braided nylon paracord construction with a plastic encased, tungsten carbide coated wire saw woven into the braided cord. Wire saw measures approximately 18.5". Black quick-release snap buckle. Easily secures to wrist or may be attached to a backpack or other gear. Unraveled cord is useful for securing, lashing, or paring down. Wire saw could be used to cut limbs, wood, or for numerous other tasks in an emergency or survival situation. Ken Onion design. Open design hang packaging. Weight 0.9 oz. Note: Measurements given may vary slightly. Size: Large. Open overall length: 10.5". Color: Green. Contains 141" of paracord (unbraided). Made in China. |
| Availability: In Stock |
|
|
 |
CR6520 CRKT Liong Mah Design Knife |
| 3 5/8" closed slip joint. 2 3/4" satin finish 8Cr14MoV stainless drop point blade with oversized nail nick. Hardened to 58-59 HRC. Black fingergrooved smooth G-10 handles. Stainless pocket clip. Black nylon lanyard. Designed by Liong Mah. #5. Standard edge blade. Made in Taiwan. |
| Availability: In Stock |
|
|
 |
CR7470 CRKT Jernigan Persian Folder Knife |
| 3 1/2" closed framelock. 2 5/8" 8Cr14MoV stainless blade with thumb stud. Stainless frame with gold titanium nitride finish. Grooved black G-10 handles with two tone stainless silver and gold bolster. Steve Jernigan design. Velvet drawstring storage pouch. Made in China. |
| Availability: In Stock |
|
|
